SE20AFB, SE20AFD, SE20AFG, SE20AFJ Datasheet

SE20AFB, SE20AFD, SE20AFG, SE20AFJ
www.vishay.com
Vishay General Semiconductor
Surface Mount ESD Capability Rectifiers
FEATURES
• Very low profile - typical height of 0.95 mm
SlimSMA
• Ideal for automated placement
• Oxide planar chip junction
• Low forward voltage drop, low leakage current
• ESD capability
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
Bottom View
Top View
DO-221AC
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
MECHANICAL DATA
IF(AV)
2.0 A
VRRM
100 V, 200 V, 400 V, 600 V
IFSM
35 A
VF at IF = 2.0 A (TA = 125 °C)
0.86 V
IR
5 μA
TJ max.
175 °C
Package
DO-221AC (SlimSMA)
Diode variations
Single die
Case: DO-221AC (SlimSMA)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
TYPICAL APPLICATIONS
General purpose, power line polarity protection, in both
consumer and automotive applications.
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
Maximum DC forward current
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
Operating junction and storage temperature range
VRRM
SE20AFB
SE20AFD
SE20AFG
SE20AFJ
S2B
S2D
S2G
S2J
100
200
400
600
UNIT
V
(1)
2.0
IF (2)
1.3
IFSM
35
A
TJ, TSTG
-55 to +175
°C
IF
A
Notes
(1) Mounted on 5.0 mm x 5.0 mm pad areas, 2 oz. FR4 PCB
(2) Free air, mounted on recommended copper pad area
Revision: 27-Jul-15
Document Number: 89954
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE20AFB, SE20AFD, SE20AFG, SE20AFJ
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 1.0 A
Instantaneous forward voltage
SYMBOL
TA = 25 °C
IF = 2.0 A
VF (1)
IF = 1.0 A
TA = 125 °C
IF = 2.0 A
TA = 25 °C
Reverse current
Rated VR
Typical reverse recovery time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
Typical junction capacitance
4.0 V, 1 MHz
TYP.
MAX.
0.91
-
0.96
1.1
0.79
-
0.86
0.98
V
-
5.0
8
100
trr
1.2
-
μs
CJ
12
-
pF
IR (2)
TA = 125 °C
UNIT
μA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
SE20AFB
SE20AFD
SE20AFG
RJA (1)
125
RJM (2)
12
SE20AFJ
UNIT
°C/W
Notes
(1) Free air, mounted on recommended PCB, 1 oz. pad area; thermal resistance R
JA - junction to ambient
(2) Mounted on 5.0 mm x 5.0 mm pad areas, 2 oz. FR4 PCB; R
JM - junction to mount
IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS 
(TA = 25 °C unless otherwise noted)
STANDARD
AEC-Q101-001
TEST TYPE
Human body model (contact mode)
TEST CONDITIONS
SYMBOL
CLASS
VALUE
C = 100 pF, R = 1.5 k
VC
H3B
> 8 kV
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SE20AFJ-M3/6A
0.032
6A
3500
7" diameter plastic tape and reel
SE20AFJ-M3/6B
0.032
6B
14 000
13" diameter plastic tape and reel
SE20AFJHM3/6A (1)
0.032
6A
3500
7" diameter plastic tape and reel
SE20AFJHM3/6B (1)
0.032
6B
14 000
13" diameter plastic tape and reel
Note
(1) AEC-Q101 qualified
Revision: 27-Jul-15
Document Number: 89954
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE20AFB, SE20AFD, SE20AFG, SE20AFJ
www.vishay.com
Vishay General Semiconductor
2.4
2.2
2
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
Instantaneous Reverse Current (μA)
DC Forward Current (A)
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
TM = 152 °C, RthJM = 12 °C/W
TM measured at cathode band
terminal PCB mount
0
25
50
75
100
125
150
175
100
TA = 175 °C
10
TA = 150 °C
TA = 125 °C
1
TA = 75 °C
0.1
0.01
TA = 25 °C
0.001
10
20
30
40
50
60
90
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Leakage Characteristics
100
D = 0.5
D = 0.3
D = 0.2
2.0
1.6
D = 1.0
D = 0.1
1.2
T
0.8
0.4
D = tp/T
tp
Junction Capacitance (pF)
D = 0.8
Average Power Loss (W)
80
Mount Temperature (°C)
2.4
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
0.0
0
0.4
0.8
1.2
1.6
2
0.1
2.4
100
TA = 175 °C
TA = 125 °C
TA = 150 °C
TA = 75 °C
1
TA = 25 °C
0.1
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
10
100
Fig. 5 - Typical Junction Capacitance
Transient Thermal Impedance (°C/W)
Fig. 2 - Forward Power Loss Characteristics
10
1
Reverse Voltage (V)
Average Forward Current (A)
Instantaneous Forward Current (A)
70
1.3
1.4
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
1000
Junction to Ambient
100
10
1
0.01
0.1
1
10
100
t - Pulse Duration (s)
Fig. 6 - Typical Junction Capacitance
Revision: 27-Jul-15
Document Number: 89954
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE20AFB, SE20AFD, SE20AFG, SE20AFJ
www.vishay.com
Vishay General Semiconductor
Thermal Resistance (°C/W)
140
Epoxy printed
circiut board FR4
copper
thickness = 70 μm
120
100
80
60
40
20
Scu (cm2)
0
0.0
2.0
4.0
6.0
8.0
10.0
Copper Pad Areas (cm2)
Fig. 7 - Thermal Resistance Junction to Ambient vs. Copper Pad Areas
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-221AC (SlimSMA)
Cathode Band
0.057 (1.45)
0.049 (1.25)
0.106 (2.70)
0.098 (2.50)
0.171 (4.35)
0.163 (4.15)
0.211 (5.35)
0.199 (5.05)
0.047 (1.20)
0.030 (0.75)
Typ.: 0.019 (0.48)
Mounting Pad Layout
0.039 (1.00)
0.035 (0.90)
0.060 (1.52)
MIN.
0.012 (0.30)
0.006 (0.15)
0.047 (1.20)
MIN.
0.123 (3.12) MAX.
0.217 (5.52) REF.
0.047 (1.20)
MIN.
Revision: 27-Jul-15
Document Number: 89954
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000