VISHAY SS15P3S-M3

New Product
SS15P3S
Vishay General Semiconductor
SMD Photovoltaic Solar Cell Protection Schottky Rectifier
FEATURES
• Very low profile - typical height of 1.1 mm
®
eSMP Series
• Ideal for automated placement
• Guardring for overvoltage protection
K
• Low forward voltage drop, low power losses
• High efficiency
1
• Low thermal resistance
2
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
TO-277A (SMPC)
K
Anode 1
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Cathode
Anode 2
• Halogen-free according to IEC 61249-2-21 definition
MECHANICAL DATA
PRIMARY CHARACTERISTICS
IF(AV)
15 A
VRRM
30 V
IFSM
280 A
EAS
20 mJ
VF at IF = 15 A
0.42 V
TJ max.
150 °C
Case: TO-277A (SMPC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
per
TYPICAL APPLICATIONS
For use in solar cell junction box as a bypass diode for
protection, using DC forward current without reverse bias.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
SS15P3S
UNIT
153S
Maximum repetitive peak reverse voltage
VRRM
30
V
IF
15 (1)
4.5 (2)
A
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
IFSM
280
A
Non-repetitive avalanche energy at IAS = 2.0 A, TJ = 25 °C
EAS
20
mJ
TOP, TSTG
- 55 to + 150
°C
TJ
 200
°C
Maximum DC forward current (fig. 1)
Operating junction and storage temperature range
Junction temperature in DC forward current without reverse bias, t  1 h
(3)
Notes
(1) Mounted on 30 mm x 30 mm Al PCB with 50 mm x 25 mm x 100 mm fin heat sink
(2) Free air, mounted on recommended copper pad area
(3) Meets the requirements of IEC 61215 Ed. 2 bypass diode thermal test
Document Number: 89128
Revision: 13-May-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
19
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SS15P3S
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 7.5 A
TA = 25 °C
IF = 15 A
Instantaneous forward voltage
SYMBOL
VF (1)
IF = 7.5 A
TA = 25 °C
Reverse current
VR = 30 V
Typical junction capacitance
4.0 V, 1 MHz
TA = 125 °C
MAX.
UNIT
0.43
-
0.50
0.57
0.32
-
0.42
0.49
150
1000
μA
59
120
mA
930
-
pF
V
TA = 125 °C
IF = 15 A
TYP.
IR (2)
CJ
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
RJA
Typical thermal resistance
VALUE
(1)
UNIT
100
°C/W
RJM (2)
3
Notes
(1) Free air, mounted on recommended copper pad area. Thermal resistance R
JA - junction to ambient.
(2) Mounted on 30 mm x 30 mm Al PCB with 50 mm x 25 mm x 100 mm fin heat sink. Thermal resistance R
JM - junction to mount.
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SS15P3S-M3/86A
0.10
86A
1500
7" diameter plastic tape and reel
SS15P3S-M3/87A
0.10
87A
6500
13" diameter plastic tape and reel
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
Notes
18
(1) Mounted on 30 mm x 30 mm Al PCB with 50 mm x 25 mm x
TM = 100 °C (1)
DC Forward Current (A)
16
14
100 mm fin heat sink, TM measured at the terminal of cathode
band
TA = 25 °C (2)
12
TA = 25 °C
(2) Mounted on 30 mm x 30 mm Al PCB (R
JA = 20 °C/W)
(3)
(3) Mounted on 30 mm x 30 mm x 2 copper pad areas FR4 PCB
10
(RJA = 30 °C/W)
8
(4) Mounted on 25 mm x 25 mm x 2 copper pad areas FR4 PCB
TA = 25 °C (4)
6
(RJA = 30 °C/W)
(5)
(5) Free air, mounted on recommended copper pad area
4
(RJA = 100 °C/W)
2
0
0
25
50
75
100
125
150
Ambient Temperature (°C)
Fig. 1 - Maximum Current Derating Curve
www.vishay.com
20
For technical questions within your region, please contact one of the following:
Document Number: 89128
[email protected], [email protected], [email protected]
Revision: 13-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SS15P3S
Vishay General Semiconductor
1000
9
Average Power Loss (W)
8
Instantaneous Reverse Current (mA)
D = 0.8
D = 0.5
7
D = 0.3
6
D = 0.2
D = 1.0
5
4
D = 0.1
T
3
2
1
D = tp/T
tp
0
TA = 125 °C
10
1
0.1
TA = 25 °C
0.01
0.001
0
2
4
6
8
10
12
14
16
10
18
20
30
40
50
60
70
80
90
100
Average Forward Current (A)
Percent of Rated Peak Reverse Voltage (%)
Fig. 2 - Forward Power Loss Characteristics
Fig. 4 - Typical Reverse Leakage Characteristics
10 000
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TA = 150 °C
Junction Capacitance (pF)
Instantaneous Forward Current (A)
TA = 150 °C
100
10
TA = 125 °C
TA = 25 °C
1
1000
100
0.1
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.1
1
10
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
Document Number: 89128
Revision: 13-May-11
100
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
21
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
SS15P3S
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-277A (SMPC)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
K
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC TO-277A
www.vishay.com
22
For technical questions within your region, please contact one of the following:
Document Number: 89128
[email protected], [email protected], [email protected]
Revision: 13-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000