RCMM Molded Metal Film Resistors

RCMM
www.vishay.com
Vishay Sfernice
Molded Metal Film Resistors
FEATURES
•
•
•
•
•
•
•
0.25 W to 1 W at 70 °C
NF C 83-230 (RC21U-31U-41U-32)
CECC 40 100
High insulation > 107 M
Great mechanical strength
Termination = Pure matte tin
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in millimeters
A
25 min.
25 min.
ØB
SERIES
ØC
A max.
Ø B max.
2.5
-0
- 0.2
ØC
WEIGHT in g
0.6
0.26
RCMM02
6.5 ± 0.2
RCMM05
10.2 ± 0.2
3.65 ± 0.1
0.6
0.46
RCMM1
16 ± 0.5
6.2 ± 0.2
0.8
1.30
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
RCMM02
RESISTANCE
RANGE

RATED POWER
P70 °C
W
LIMITING
ELEMENT
VOLTAGE
V
TOLERANCE
±%
TEMPERATURE
COEFFICIENT
± ppm/°C
1 to 332K
0.25
300
2, 5
50, 100
1 to 332K
0.50
350
2, 5
50, 100
RCMM05
1 to 1M
0.50
350
2, 5
50, 100
RCMM1
1 to 2.26M
1.0
500
2, 5
50, 100
Note
•
Undergoes European Quality Insurance System (CECC)
TECHNICAL SPECIFICATIONS
VISHAY SFERNICE SERIES
RCMM02
CECC 83-230
CECC 40 100-802
Power Rating at 70 °C
Resistance Value Range
in Relation to Tolerance
RCMM05
RCMM1
RC21U
RC32
RC31U
RC41U
BV
-
CV
-
0.25 W
0.50 W
0.50 W
1W
±5%
1  to 330 k
E24
1  to 330 k
E24
1  to 1 M
E24
1  to 2.2 M
E24
±2%
1  to 332 k
E48
1  to 332 k
E48
1  to 1 M
E48
1  to 2.26 M
E48
Maximum Voltage
300 V
350 V
350 V
500 V
Critical Resistance
-
245 k
245 k
250 k
Temperature
Coefficient
Rated
in the range - 55 °C + 155 °C
K2  ± 100 ppm/°C
Typical
in the range - 10 °C + 70 °C
 ± 50 ppm/°C
Insulation Resistance (Typical)
Voltage Coefficient
Environmental Specifications
 107 M (500 VDC)
 ± 10 ppm/V
- 65 °C/+ 155 °C/56 days
Note
•
Undergoes European Quality Insurance System (CECC)
Revision: 05-Aug-13
Document Number: 52006
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCMM
www.vishay.com
Vishay Sfernice
PERFORMANCE
CECC 40 100 EN 140100
TESTS
TYPICAL VALUES
AND DRIFTS
CONDITIONS
REQUIREMENTS
1000 h at 125 °C 35 % of Pn
 ± (2 % + 0.1 )
Insulation resist. > 1 G
± 0.75 % or 0.05 
Insulation resist. 106 M
Short Time Overload
2.5 Um/5 s
 ± (0.5 % + 0.05 )
± 0.2 % or 0.05 
Damp Heat Humidity
(Steady State)
56 days
with low load
 ± (2 % + 0.1 )
Insulation resist. > 100 M
± 0.5 % or 0.05 
Insulation resist. 106 M
Rapid Temperature Change
- 55 °C + 125 °C
 ± (0.5 % + 0.05 )
± 0.1 % or 0.05 
Climatic Sequence
- 55 °C + 125 °C
 ± (2 % + 0.1 )
Insulation resist. > 100 M
± 0.1 % or 0.05 
Insulation resist. 106 M
Terminal Strength
Pull - twist - 2 bends
 ± (0.5 % + 0.05 )
± 0.05 % or 0.05 
10 Hz to 500 Hz
 ± (0.5 % + 0.05 )
± 0.05 % or 0.05 
+ 260 °C, 10 s
 ± (0.5 % + 0.05 )
± 0.1 % or 0.05 
Load Life
Cycle 90’/30’
1000 h at Pn at 70 °C
 ± (2 % + 0.1 )
Insulation resist. > 1 G
± 0.5 % or 0.05 
Insulation resist. 106 M
Shelf Life
1 year
ambient temperature
-
± 0.1 % or 0.05 
Load Life at max. Category Temperature
Vibration
Soldering (Thermal Shock)
Note
• RC41: 15 s
POWER RATING
TEMPERATURE RISE
1
35
M
RC
05
M
M
C
R
02
40
MM
50
M
60
RC
HOT SPOT TEMPERATURE IN °C
RATED POWER IN %
100
20
0
0
0
30
50
70
100
125
AMBIENT TEMPERATURE IN °C
150
0
0.25
0.5
0.75
1
RATED POWER IN W
MARKING
Printed: Vishay Sfernice trademark, series, style, ohmic value (in ), tolerance (in %), temperature coefficient, manufacturing
date.
Due to lack of space RCMM02 is printed MM02.
Revision: 05-Aug-13
Document Number: 52006
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCMM
www.vishay.com
Vishay Sfernice
GLOBAL PART NUMBER INFORMATION
R
GLOBAL
MODEL
C
M
M
0
2
1
3
0
1
J
K
S
SIZE
SPECIAL
OHMIC VALUE
TOLERANCE
TEMPERATURE
COEFFICIENT
02
05
10
As applicacable.
Contact us.
The first three digits are
significant figures and
the last digit specifies
the number of zeros to
follow. R designates
decimal point.
1301 = 1.3 k
3301 = 3.3 k
22R0 = 22.0 
1R22 = 1.22 
G=2%
J=5%
K = K2,
100 ppm/K
RCMM
Revision: 05-Aug-13
1
4
PACKAGING
AM500 = A20
AM1000 = A22
BAG100 = S14
BAG50 = S09
Document Number: 52006
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000