V i shay Interte c hn o l o g y, In c . I INNOVAT AND TEC O L OGY 351 HE N HN HALL EFFECT POSITION SENSOR O 19 62-2012 Resistors - Long Life of 10 000 000 Cycles Single-Turn, Bushing-Mount, Hall-Effect Sensor “Mount and Forget!” Key Benefits • • • • • • Accurate linearity down to ± 0.5 % All electrical angles available up to 360º Long life > 10 million cycles No-contact, Hall effect technology Designed for use in harsh environments Size 09 (22.2 mm) APPLICATIONS • • • • • • • • • Foot-pedal position sensors Throttle position sensors Steering position sensors Rudder positioning Auto pilot feedback Drive-by-wire Lift-and-shuttle position sensors Tilt control and tilt positioning feedback Suspension-system position sensors Resources • Datasheet: 351 HE - http://www.vishay.com/doc?57099 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0085-1202 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i shay Interte c hn o l o g y, In c . AND TEC I INNOVAT O L OGY 351 HE Vishay Spectrol N HN HALL EFFECT POSITION SENSOR Model 351 HE O 19 62-2012 Single-Turn, Hall-Effect Sensor SingleBushing-Mount, Turn Bushing Mount Hall Effect “Mount and 09 Forget!” Sensor in Size (22.2 mm) • Accurate linearity down to: ± 0.5 % RoHS • All electrical angles available up to: 360° (no dead band) COMPLIANT • Long life: greater than 10M cycles • Non contacting technology: Hall effect • Model dedicated to all applications in harsh environments ELECTRICAL SPECIFICATIONS PARAMETER STANDARD SPECIAL Electrical Angle 90°, 180°, 270°, 360° Any other angle upon request Linearity ±1% ± 0.5 % 5 VDC ± 10 % Other upon request 10 mA typical 16 mA for PWM output Analog ratiometric 10 % to 90 % of Vsupply or PWM 10 % to 90 % duty cycle Other upon request Supply Voltage Supply Current Output Signal Over Voltage Protection + 20 VDC Reverse Voltage Protection - 10 VDC Load Resistance Recommanded Min. 1 kΩ for analog output and PWM output Hysteresis < 0.2 % MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel 360° continuous, stops upon request: 340° ± 3° Bearing type Sleeve bearing Standard IP 50; other on request Weight 20 g ± 2 g ORDERING INFORMATION/DESCRIPTION 351HE 0 A 1 ELECTRICAL MODEL FEATURES LINEARITY ANGLE W A 1S22 XXXX OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST 0: Continuous rotation A: ± 1 % 1: 90° W: Wires and antirotation pin B: ± 0.5 % 2: 180° Z: Custom 1: Continuous rotation 3: 270° and no antirotation 4: 360° pin 9: Other angles 2: Stops at 340° and antirotation pin 3: Stops at 340° and no antirotation pin Revision 15-Nov-07 Resistors - Long Life of 10 000 000 Cycles FEATURES A: Analog CW 0: 6 mm B: Analog CCW 1: 6.35 mm C: PWM CW 2: 3.175 mm D: PWM CCW 9: Special Z: Other output P: Plain S: Slotted Z: Other type BO 10 e1 PACKAGING LEAD FINISH Box of 10 pieces Shaft length from mounting face 22 mm to 72 mm max. per step of 5 mm SAP PART NUMBERING GUIDELINES 351HE 1 B 9 Z C 0P27 XXXX MODEL MECHANICAL FEATURES LINEARITY ELECTRICAL ANGLE OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST www.vishay.com PRODUCT SHEET 160 For technical questions, contact: [email protected] 2/2 Document Number: 57099 VMN-PT0085-1202 Revision: 15-Nov-07 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000