Datasheet - Alpha & Omega Semiconductor

AOZ8073
4-Line EMI Filter with Integrated ESD Protection
General Description
Features
The AOZ8073 is an 4-line device integrating EMI filtering
with ESD protection for each line. It is designed to
suppress unwanted EMI/RFI signals and provide electrostatic discharge (ESD) protection in portable electronic
equipment. This state-of-the-art device utilizes AOS
leading edge Trench Vertical Structure [TVS]2 ™
technology for superior clamping performance and filter
attenuation over the full operating display range. The
AOZ8073 has been optimized for protection of color LCD
displays and CCD camera lines in cellular phones and
other portable consumer electronic devices.
z 4 lines for EMI filtering and ESD protection:
The AOZ8073 consists of four identical circuits
comprised of TVS diodes for ESD protection, and a
resistor–capacitor network for EMI/RFI filtering.
A series resistor value of 100Ω and a capacitance
value of 8pF are used to achieve -20dB minimum
attenuation from 700MHz to 3.0GHz. The TVS diodes
provide effective suppression of ESD voltages in excess
of ±15kV (air discharge) and ±15kV (contact discharge).
This exceeds IEC 61000-4-2, level 4 ESD immunity test.
– Exceeds IEC 61000-4-2, level 4 (ESD) immunity test
– ±15kV (air discharge) and ±15kV (contact discharge)
z Trench Vertical Structure [TVS]2 ™ based technology
used to achieve excellent ESD clamping & filter
performance over the full operating display range
z Filter performance: -20db attenuation from 700MHz to
3.0GHz
z Low operating voltage: 5.0V
z Capacitance stability over wide range of voltages and
temperatures
z DFN package: 1.2mm x 1.8mm, 0.4mm pitch
z Pb-Free device
Applications
z EMI filtering and ESD protection for data lines
z LCD displays, camera interface, I/O interface
z Portable handheld devices, cell phones,
PDA phones
The AOZ8073 comes in an RoHS compliant, 1.2mm x
1.8mm, 0.4mm pitch DFN package and is rated over a
-40°C to +85°C ambient temperature range.
Typical Application
D0
D1
D2
D3
100Ω
CH1
8pF
8pF
100Ω
CH2
8pF
8pF
LCD/Camera
Module
100Ω
CH3
8pF
8pF
100Ω
CH4
8pF
8pF
Figure 1.
Rev. 1.0 September 2010
www.aosmd.com
Page 1 of 7
AOZ8073
Ordering Information
Part Number
Ambient Temperature Range
Package
Environmental
AOZ8073DI
-40°C to +85°C
DFN-8
Green Product
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information.
Pin Configuration
8
2
7
3
6
4
5
1
Exposed Pad (GND)
8
1
7
6
5
2
3
4
DFN-8
(Bottom View)
Top View
Pin Description
Pin Number
Pin Name
Pin Function
1, 8
CH 1
Channel 1 Connections
2, 7
CH 2
Channel 2 Connections
3, 6
CH 3
Channel 3 Connections
4, 5
CH 4
Channel 4 Connections
Exposed Pad
GND
Common Ground Connection
Rev. 1.0 September 2010
www.aosmd.com
Page 2 of 7
AOZ8073
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage the device.
Parameter
Rating
Storage Temperature (TS)
-65°C to +150°C
ESD Rating per IEC61000-4-2, contact
ESD Rating per IEC61000-4-2, air
(1)
±15kV
(1)
±15kV
ESD Rating per Human Body Model(2)
±30kV
Notes:
1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω.
2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ.
Electrical Characteristics
TA = 25°C unless otherwise specified.
Symbol
VRWM
VBR
IR
VCL
RCH
CCH
fC
Parameter
Reverse Working Voltage
Conditions
Max.
Units
5.0
V
8
V
0.1
µA
ILOAD = 1A, positive
ILOAD = 1A, negative clamp(5)(8)
9.0
-2.5
V
ILOAD = 5A, positive clamp(5)(8)
ILOAD = 5A, negative clamp(5)(8)
11.5
-3.5
ILOAD = 12A, positive clamp(5)(8)
ILOAD = 12A, negative clamp(5)(8)
14.0
-5.0
(4)
Reverse Breakdown Voltage
IT = 1mA
Reverse Leakage Current
VRWM = 3.3V
Signal Clamp Voltage
Total Series Resistance
Min.
Typ.
(3)
6
7
clamp(5)(8)
IR = 20mA
Ground(6)(7)(8)
90
100
110
Ω
7
8
9
pF
Channel Capacitance
Input to
Cut-off Frequency
Measured with 50Ω source and 50Ω load
termination
220
MHz
Attenuation from 700MHz
to 3.0GHz
VR = 0V Measured with 50Ω source and
50Ω load termination
-20
dB
Notes:
3. The working peak reverse voltage, VRWM, should be equal to or greater than the DC or continuous peak operating voltage level.
4. VBR is measured at the pulse test current IT.
5. Measurements performed using a 100ns Transmission Line Pulse (TLP) system.
6. Total capacitance is equal to 2 x CCH.
7. Measured at 25°C, VR = 2.5V, f = 1.0MHz.
8. Guaranteed by design.
Rev. 1.0 September 2010
www.aosmd.com
Page 3 of 7
AOZ8073
Typical Performance Characteristics
Insertion Loss Characteristics
Analog Crosstalk
0
0
-5
-10
-20
-20
S21 (db)
S21 (db)
-15
-25
-30
-40
-60
-35
-40
-80
-45
-50
1
10
100
1000
-100
10000
1
10
100
Frequency (MHz)
Clamping Voltage vs. Peak Pulse Current
(tperiod = 100ns, tr = 1ns)
10000
Forward Voltage vs. Forward Current
(tperiod = 100ns, tr = 1ns)
6
16
5
14
Forward Voltage (V)
Clamping Voltage, Vcl (V)
1000
Frequency (MHz)
12
10
4
3
2
8
1
0
6
0
2
4
6
8
10
0
12
2
4
6
8
10
12
Forward Current (A)
Peak Pulse Current, Ipp (A)
Typical Resistance vs. Temperature
110
Resistance (Ω)
105
100
95
90
-45
-25
-5
5
25
45
65
85
Temparature (°C)
Rev. 1.0 September 2010
www.aosmd.com
Page 4 of 7
AOZ8073
Package Dimensions, DFN 1.2 x 1.8, 8L
D1
D
b
e
D2
E
E1
L
Pin 1
Marking
Pin 1 ID
(C0.2x45°)
TOP VIEW
BOTTOM VIEW
A
SIDE VIEW
A3
A1
Dimensions in millimeters
RECOMMENDED LAND PATTERN
0.20
1.00
0.20
0.20
0.20
0.20
1.00
0.30
0.40
0.20
Symbols
A
Min.
0.50
A1
A3
b
0.00
Nom.
0.55
Symbols
A
Min.
0.020
—
0.05
0.152 Ref.
0.15
0.20
0.25
A1
A3
b
0.000
D
D1
1.75
0.95
1.85
1.05
D
D1
0.069
0.037
D2
E
E1
1.15
0.25
0.200 Ref.
1.20
1.25
0.30
0.35
D2
E
E1
0.045
0.010
0.008 Ref.
0.047 0.049
0.012 0.014
e
L
0.20
0.40 BSC
0.25
0.30
e
L
0.008
0.016 BSC
0.010 0.012
1.80
1.00
Max.
0.60
Dimensions in inches
Nom.
0.022
Max.
0.024
—
0.002
0.006 Ref.
0.006 0.008 0.010
0.071
0.039
0.073
0.041
0.30
Notes:
1. Controlling dimension is millimeter, converted inch dimensions are not necessaily exact.
2. Warpage shall not exceed 0.10mm.
3. Marking is for package orientation reference only.
Rev. 1.0 September 2010
www.aosmd.com
Page 5 of 7
AOZ8073
Tape and Reel Dimensions, DFN 1.2 x 1.8, 8L
Carrier Tape
P2
P1
D1
D0
E1
K0
E2
E
B0
Ref. 5°
P0
T
A0
Feeding Direction
UNIT: mm
Package
DFN 1.8x1.2
A0
1.32
±0.05
B0
1.92
±0.05
K0
0.75
±0.05
D0
ø1.55
±0.05
D1
E
ø0.55
8.00
±0.05 +0.3/-0.1
E1
1.75
±0.1
E2
3.50
±0.05
P0
4.00
±0.1
P1
4.0
±0.1
P2
2.0
±0.05
T
0.25
±0.05
W1
Reel
S
K
N
M
G
R
H
W
UNIT: mm
Tape Size Reel Size
8mm
ø178
M
N
W
ø178.0
±1.0
ø60.0
±1.0
11.80
±0.5
W1
H
9.0
ø13.0
±0.5 +0.5/-0.2
S
K
2.40 10.25
±0.10 ±0.2
G
R
ø9.8
—
Leader / Trailer & Orientation
Trailer Tape
300mm Min.
Rev. 1.0 September 2010
Components Tape
Orientation in Pocket
www.aosmd.com
Leader Tape
500mm Min.
Page 6 of 7
AOZ8073
Part Marking
H 15
Assembly Lot Code
Week and Year Code
Part Number Code
This data sheet contains preliminary data; supplementary data may be published at a later date.
Alpha & Omega Semiconductor reserves the right to make changes at any time without notice.
LIFE SUPPORT POLICY
ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of
the user.
Rev. 1.0 September 2010
2. A critical component in any component of a life
support, device, or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
www.aosmd.com
Page 7 of 7