AOZ8535 6-Line EMI Filter with Integrated ESD Protection General Description Features The AOZ8535 is a 6-line device integrating EMI filtering with ESD protection for each line. It is designed to suppress unwanted EMI/RFI signals and provide electrostatic discharge (ESD) protection in portable electronic equipment. This state-of-the-art device utilizes AOS leading edge Trench Vertical Structure [TVS]2 ™ technology for superior clamping performance and filter attenuation over the full operating display range. The AOZ8535 has been optimized for protection of color LCD displays and CCD camera lines in cellular phones and other portable consumer electronic devices. ● 6 lines for EMI filtering and ESD protection: – Exceeds IEC 61000-4-2, level 4 (ESD) immunity test – ±30kV (air discharge) and ±24kV (contact discharge) ● Trench Vertical Structure [TVS]2 ™ based technology used to achieve excellent ESD clamping & filter performance over the full operating display range ● Cutoff frequency: 450MHz ● Filter performance: The AOZ8535 consists of six identical circuits comprised of TVS diodes for ESD protection, and a inductor–capacitor network for EMI/RFI filtering providing a cutoff frequency at 450MHz for high speed data lines. An inductor value of 17nH and a capacitance value of 16pF are used to achieve greater than -30dB attenuation at 1.0GHz. The TVS diodes provide effective suppression of ESD voltages in excess of ±30kV (air discharge) and ±24kV (contact discharge). This exceeds IEC 610004-2, level 4 ESD immunity test. ● – -30dB attenuation at 1.0GHz – -25dB attenuation from 800MHz to 5.0GHz Low operating voltage: 5.0V The AOZ8535 comes in an RoHS compliant, 1.35mm x 3.0mm DFN package and is rated over a -40°C to +85°C ambient temperature range. ● Capacitance stability over wide range of voltages and temperatures ● DFN package 1.35mm x 3.0mm ● Pb-Free device Applications ● EMI filtering and ESD protection for data lines ● LCD displays, camera interface, I/O interface ● Portable handheld devices, cell phones, PDA phones Electrical Schematic (each channel) 17nH CHn (n = 1–6) 16pF 16pF GND Figure 1. Rev. 1.6 January 2010 www.aosmd.com Page 1 of 7 AOZ8535 Ordering Information Part Number Ambient Temperature Range Package Environmental AOZ8535DI -40°C to +85°C DFN-12 RoHS Compliant Green Product AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information. Pin Configuration 1 12 2 11 3 3 10 4 4 9 5 8 6 7 1 11 2 10 9 8 Exposed Pad (GND) 12 5 6 7 DFN-12 (Bottom View) Top View Pin Description Rev. 1.6 January 2010 Pin Number Pin Name Pin Function 1,12 CH 1 Channel 1 Connections 2, 11 CH 2 Channel 2 Connections 3, 10 CH 3 Channel 3 Connections 4, 9 CH 4 Channel 4 Connections 5, 8 CH 5 Channel 5 Connections 6, 7 CH 6 Channel 6 Connections Exposed Pad GND Common Ground Connection www.aosmd.com Page 2 of 7 AOZ8535 Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Parameter Rating Storage Temperature (TS) -65°C to +150°C ESD Rating per IEC61000-4-2, contact ESD Rating per IEC61000-4-2, air (1) ±24kV (1) ±30kV ESD Rating per Human Body Model(2) ±30kV Notes: 1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω. 2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ. Electrical Characteristics TA = 25°C unless otherwise specified. Symbol VRWM Parameter Reverse Working Voltage Conditions Max. Units 5.0 V 8 V 0.1 µA ILOAD = 1A, positive ILOAD = 1A, negative clamp(5)(6) 10.0 -2 V ILOAD = 5A, positive clamp(5)(6) ILOAD = 5A, negative clamp(5)(6) 11.0 -2.5 ILOAD = 12A, positive clamp(5)(6) ILOAD = 12A, negative clamp(5)(6) 12.0 -2.75 1mA(4) VBR Reverse Breakdown Voltage IT = IR Reverse Leakage Current VRWM = 3.3V VCL LCH CCH fC Signal Clamp Voltage Min. Typ. (3) 6 7 clamp(5)(6) Inductance 17 C2(6) 16 nH Capacitance C1, 18 pF Cut-off Frequency Measured with 50Ω source and 50Ω load termination at -6dB 450 MHz Attenuation from 800MHz to 5.0GHz VR = 0V Measured with 50Ω source and 50Ω load termination -25 dB Notes: 3. The working peak reverse voltage, VRWM, should be equal to or greater than the DC or continuous peak operating voltage level. 4. VBR is measured at the pulse test current IT. 5. Measurements performed using a 100ns Transmission Line Pulse (TLP) system. 6. Guaranteed by design. Not 100% tested in production. Rev. 1.6 January 2010 www.aosmd.com Page 3 of 7 AOZ8535 Typical Performance Characteristics Insertion Loss S21 -5 80 -10 60 -15 40 -20 20 -25 -30 0 -20 -35 -40 -40 -60 -45 -80 -100 -50 1 10 100 Crosstalk 100 S21 (db) S21 (db) 0 1000 1 Frequency (MHz) Rev. 1.6 January 2010 www.aosmd.com 10 100 Frequency (MHz) 1000 10000 Page 4 of 7 AOZ8535 Package Dimensions, DFN 2.5 x 1.2, 12L EP1 S E E1 D D1 L 12x Pin 1 Marking b Pin 1 ID (C0.2x45°) e TOP VIEW BOTTOM VIEW A Dimensions in millimeters SIDE VIEW A1 A3 RECOMMENDED LAND PATTERN 1.80 0.15 0.35 Symbols A Min. 0.50 A1 b A3 0.00 0.15 D E 1.15 2.45 D1 D1 e 0.25 1.75 L 0.20 Nom. 0.55 Max. 0.60 Dimensions in inches Symbols A Min. 0.020 A1 b A3 0.000 0.006 1.25 2.55 D E 0.045 0.096 0.30 0.35 1.80 1.85 0.40 BSC D1 D1 e 0.010 0.069 L 0.008 — 0.05 0.20 0.25 0.152 REF 1.20 2.50 0.24 0.30 Nom. 0.022 Max. 0.024 — 0.002 0.008 0.010 0.006 REF 0.047 0.098 0.049 0.100 0.012 0.014 0.071 0.073 0.016 BSC 0.010 0.012 0.20 0.30 1.05 0.40 C0.15x45° 0.20 0.20 UNIT: mm Notes: 1. All dimensions are in millimeters. Converted inch dimensions are not necessarily exact. Rev. 1.6 January 2010 www.aosmd.com Page 5 of 7 AOZ8535 Tape and Dimensions, DFN 2.5 x 1.2 Carrier Tape P2 P1 D0 D1 E1 K0 E2 E B0 Ref 5° P0 T A0 A–A Feeding Direction UNIT: mm Package A0 B0 K0 DFN 2.5x1.2 1.45 ±0.05 2.80 ±0.05 0.70 ±0.05 D0 D1 ø1.55 ø0.80 ±0.05 ±0.05 E E1 E2 P0 P1 P2 T 8.00 ±0.03 1.75 ±0.1 3.50 ±0.05 4.00 ±0.10 4.0 ±0.10 2.0 ±0.05 0.30 ±0.05 Reel W1 S M K N G R H W UNIT: mm Tape Size Reel Size 8mm ø178 M N W W1 H S K E ø178.0 ±1.0 ø60.0 ±0.5 11.80 ±0.5 9.0 ±0.5 ø13.0 +0.5 / –0.2 2.40 ±0.1 10.25 ±0.2 ø9.8 Leader / Trailer & Orientation Trailer Tape 300mm Min. Rev. 1.6 January 2010 Components Tape Orientation in Pocket www.aosmd.com Leader Tape 500mm Min. Page 6 of 7 AOZ8535 Package Marking BA11 Assembly Lot Code Week and Year Code Part Number Code This data sheet contains preliminary data; supplementary data may be published at a later date. Alpha & Omega Semiconductor reserves the right to make changes at any time without notice. LIFE SUPPORT POLICY ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. Rev. 1.6 January 2010 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.aosmd.com Page 7 of 7