Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号:PLCC2K YCT 1、Features/特 征： z Emitting Color/发光颜色：Yellow/黄色 z Lens Type/封装特性：Water Clear/无色透明 z Device Outline/外形特征：3.5×2.8×1.9mm z RoHS compliant/符合 RoHS 标准 2、Applications/应 用： z Backlight for Mobile，Machine Vision， LCD Display/手机、电话、显示屏背光源 z Backlight in Dashboard and switch of Automive/汽车仪表盘、记程器背光源 3、Outline Dimensions/产品外形尺寸： ﹢ ﹢ ﹣ ﹣ Notes:（备注） Tolerance is 0.1mm(公差 0.1mm) 参考焊盘尺寸 Page 1 of 9 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号:PLCC2K YCT 4、Absolute maximum ratings/极限参数（Ta = 25℃）： Parameter 参数 Symbol 符号 Value 参数 Unit 单位 Power Dissipation 损耗功率 Pd 60 mW Reverse Voltage 反向电压 VR 5 V Pulse Current 正向峰值电流[1] IFp 100 mA Forward Current 正向工作电流 IFm 25 mA Operating Temperature 工作温度范围 Topr - 40 ~ +85 ℃ Storage Temperature 储存温度范围 Tstr - 40 ~ +100 ℃ Notes/备注：[1]. 0.1ms pulse width,1/10 Duty. /[1] 脉冲宽度0.1ms，占空比1/10。 5、Electrical and optical characteristics/光电参数（Ta = 25℃）： Parameter 参数 Symbol 符号 Test Condition 测试条件 Value 参数[1] Unit 单位 Min. Typ. Forward Voltage VF IF =20mA —— 2.0 正向电压 Reverse Current IR VR=5V —— —— 反向电流 Dominate Wavelength λd IF=20mA 584 592 主波长 Peak Wavelength λp IF=20mA —— 591 峰值波长 Spectral Line half-width —— 15 Δλ IF=20mA 半波宽度 Luminous Intensity IV IF=20mA 320 400 发光强度 Viewing Angle 2θ1/2 IF=20mA —— 120 发光指向角 Notes/备注：[1] Tolerance 误差：VF：±0.10V，Iv：±15%，其它：±5% Max. 2.4 V 30 μA 594 nm —— nm —— nm —— mcd —— Deg. Page 2 of 9 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号:PLCC2K YCT 6、Product Rank/产品分档 Luminous Intensity / 发光强度（mcd） (Ta=25℃) Rank P Q R Iv 280~390 390~550 550~770 Wavelength / 波长（nm） (Ta=25℃) Rank Y1 Y2 Y3 Y4 Y5 WLD 582-585 585-588 588-591 591-594 594-597 Voltage / 电压（V） （Ta=25℃) Rank C D E F G H Vf 1.8-1.9 1.9-2.0 2.0-2.1 2.1-2.2 2.2-2.3 2.3-2.4 Notes/备注：Rank error/分档误差： Iv：±15%，λd：±1nm， Vf：±0.10v Page 3 of 9 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号:PLCC2K YCT 7、Typical electrical/optical characteristic curves/光电特性曲线： Fig.1 正向电流 Vs. 正向电压 Fig.2 相对亮度 Vs. 正向电流 2.5 Luminous Intensity Relative Value at IF=20mA Forward Current(mA) 50 40 30 20 10 0 1.6 1.8 2.0 2.2 2.4 Forward Voltage(V) Relative Luminous Intensity Forward Current(mA) 40 30 20 10 20 40 60 80 1.0 0.5 0 10 20 30 40 IF-Forward Current (mA) 100 2.5 2.0 1.5 1.0 0.5 0 -40 Ambient Temperature TA (℃) 40 60 -20 0 20 Ambient Temperature TA (℃) Fig.5 相对亮度 Vs. 波长 80 90 SPATIAL DISTRIBUTION 100 75 /相对亮度 Relative Luminous Intensity 50 Fig.4 相对亮度 Vs. 环境温度 50 0 1.5 0 2.6 Fig.3 正向电流 Vs. 环境温度 0 2.0 1.0 50 0.9 25 0 0.8 450 500 550 600 650 Wavelength λ(nm)/波长 700 750 0.7 0.5 0.3 0.1 0 0.2 0.4 Page 4 of 9 0.6 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号:PLCC2K YCT 8、Relibility Analysis/可靠性试验 8.1 Test Items And Results/测试项目和判据 Spec. / 引用标准 Q’ty/ 数量 Time/ 时间 Standard/判定 GB/T 4937， Ⅱ，2.2 20 2times ALL PASS Tsld=235±5℃，3sec GB/T 4937， Ⅱ，2.1 20 1times Over 95% ALL PASS 3 Temperature Cycle/ 高低温循环 -40℃—— 100℃ 30min ~ 30min The cut is not more than 1 min GB/T 4937， Ⅲ，1 20 50cycles ALL PASS 4 Moisture Resistance Cyclic /湿热循环 25℃/12hr~ 55℃/12hr 95%RH GB/T 4937， Ⅲ，4 20 6cycles ALL PASS 5 High Temperature Storage /高温储存 Ta=100℃ GB/T 4937， Ⅲ，2 20 1000hrs ALL PASS 6 Low Temperature Storage /低温储存 Ta=-40℃ GB/T 4937， Ⅲ，2 20 1000hrs ALL PASS 7 Steady State perating Life /电耐久性 GB/T 18904.3 Part A 20 1000hrs Iv decay <30% No. Item/项目 Test Condition/测试条件 1 IR Reflow (Reflow Soldering) /回流焊接 Tsld=260℃，10sec 2 Solder ability/可焊性 IF=20mA Ta=25℃ 8.2 Criteria For Judging Damage/判断标准 Symbol/ 符号 Test conditions /测试条件 Luminous Intensity/亮度 Iv Forward Voltage/正向电压 Reverse current/反向电流 Item/项目 Criteria for Judgement /判断标准 Min./最小值 Max./最大值 IF=20mA L.S.L *0.7 / VF IF=20mA / U.S.L*1.1 IR VR=5v / U.S.L*2 9 *U.S.L.：Upper Standard Level / 上限 *L.S.L.：Lower Standard Level / 下限 、Notes/注意 9.1 Moisture Proof Packaging/ 防潮包装 9.1.1 LEDs need to package in mois ture proof bag. When moisture is absorbed into the SMT Page 5 of 9 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号:PLCC2K YCT package it may vaporize and expand during soldering. There is a possibility that this can cause exfoliation of the contacts and damage to the optical characteristics of the LEDs. For this reason, the moisture proof bag is used to keep moisture to a minimum in the bag. 产品必须包封装在防潮包装袋中。当湿气进入防潮包装袋的时候，在焊接时，湿气会 受热汽化膨胀，从而可能影响产品的光学特性，甚至造成封装胶体的开裂剥离。因此，防 潮袋要求放置在保持低湿度的盒中。 9.1.2 Moisture proof function is in active. The moisture proof bag is made of an aluminum moisture proof bag. A package of a moisture absorbent material (silica gel) is inserted into the aluminum moisture proof bag. The silica gel turns the smashing from the transparent circular spherical pellet. 防潮的作用是缓慢的。防潮袋使用铝防潮袋，并在铝防潮袋中放入潮气吸收材料（硅 胶干燥剂）。当硅胶干燥剂吸收潮气后，硅胶干燥剂从透明圆形球状颗粒变成粉碎物。 9.2 Storage Method/ 储存方式 9.2.1 Before opening the bag: The LEDs should be used within a year and kept at 30℃ or less and 60%RH or less. The moisture proof bag with absorbent material is needed when storing the LEDs. 拆开包装袋之前：产品可以储存一年，但要求放置在温度低于30℃,湿度低于60%的环 境中；当存放产品时，必须放置在带有干燥剂的防潮容器中。 9.2.2 After opening the bag: The LEDs should be soldered within 24 hours after opening the package. If unused LEDs remain, they should be stored in moisture proof bags with moisture absorbent material. It recommended that the user use the LEDs as soon as possible. If the LEDs have exceeded the storage time or the moisture absorbent material has faded away. Baking process should be performed by using more than 24hours baking at 60±5℃ before using LEDs. 拆开包装袋之后：产品应该在拆封后的24小时内焊接完毕；如果没用完，产品应该储 存在带有干燥剂的防潮包装袋中；建议客户尽快的使用完产品；如果产品超出了使用期限 或者干燥剂失效，那么产品在使用前必须在60±5℃中烘烤至少24小时。 √正确 Http：// www. ledz .com X错误 Page 6 of 9 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号:PLCC2K Y CT 9.3 Heat Generation/ 产品热量的产生 Thermal design of the end applications are of paramount importance. Please consider the heat generation of the LED when making the system design. It is necessary to avoid intense heat generation and operate within the maximum ratings given in this specification. 应用产品的热学设计是至关重要的。在做系统设计时，请考虑LED的散热，避免热量 的积累，必须严格的在允许的温度范围内使用。 9.4 Soldering/ 焊接 10.4.1 Lead Solder/回流焊接 9.4.2 Notes for reflow soldering/回流焊注意事项: 1. Baking process should be performed by using more than 24hours baking at 60±5℃ before using LEDs./ 在使用前LED必须在60±5℃中烘烤至少24小时。 2. Please choose the right nozzle to avoid the damage to products due to the pressure./请 选择合适的吸嘴大小和压力，以避免对产品产生不良隐患。 3. No more than twice for reflow soldering./回流焊不可超过两次。 9.4.3 Hand Soldering （Not Recommended）/手工焊接（不推荐） Soldering iron/烙铁焊接：260 degrees C max/不超过260℃；3 seconds max/不超过3s； once/允许1次. Http：// www. ledz .com Page 7 of 9 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号:PLCC2K Y CT 9.5 Cleaning/ 清洗 It is recommended that isopropyl alcohol be used as a solvent for cleaning the LEDs. It should be confirmed beforehand whether the solvents will dissolve the package the resin or not when using other solvents. Before cleaning, a pre-test should be done to confirm whether any damage to the LEDs will occur. Please do not clean the LEDs by the ultrasonic. 建议使用酒精作为溶剂清洗LED。若要使用其他溶剂，应该预先证实是否能溶化封装 料。在清洗作业前，必须预先实验确认对LEDS无任何的伤害。请不要使用超声波清洗LED。 9.6 Static Electricity/ 静电 It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that precautions be taken against surge voltage to the equipment that mounts the LEDs. 在接触LED时，建议使用防静电手腕带或防静电手套。所有的器件、设备和机器必须 有可靠的接地。对所有LED接触的设备，建议采取预防措施消除冲击电压。 9.7 Others/ 其他 1. The LED light output is strong enough to injure human eyes. Precautions must be taken to prevent looking directly at the LEDs with unaided eyes for more than a few seconds. LED的光辐射足够强时，会对人眼造成伤害。若眼睛要直接看LED，并且要一定的时 间，则必须采取相应防护措施。 2. LED operating environment and sulfur element composition cannot be over 100PPM in the LED mating usage material. LED工作环境及与LED适配的材料中硫元素及化合物成份不可超过100PPM。 3. Not suitable to operate in acidic environment, PH<7 LED不可用在PH<7的酸性环境。 4. When we need to use external glue for LED application products, please make sure that the external gluematches the LED packaging glue. Additionally ,as most of LED packaging glue is silica gel, and it has strong Oxygen permeability as well as strong moisture permeability; in order to prevent external material from getting into the inside of LED, which may cause the Http：// www. ledz .com Page 8 of 9 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号:PLCC2K Y CT malfunction of LED, the single content of Bromine element is required to be less than 900PPM,the single content of Chlorine element is required to be less than 900PPM,the total content of Bromine element and Chlorine element in the external glue of the application products is required to be less than 1500PPM. 在使用外封胶涂抹LED产品时，应确保外封胶与LED封装胶水相匹配，因为大多数LED 的封装胶水为硅胶，它有较强的氧化性和较强的吸湿性，必须防止外封材质进入LED内部 以造成LED的损伤，单一的溴元素含量要求小于900PPM，单一氯元素含量要求小于 900PPM，在涂抹LED产品时要求外封胶溴元素与氯元素总含量必须小于1500PPM。 5. To ensure the quality of our LEDs, So please do not put pressure on the LEDs. 为确保LED的可靠性，在操作过程中不可施加压力在LED器件胶体表面。 √正确 Http：// www. ledz .com X 错误 Page 9 of 9