Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 1、Features/特 征： z Emitting Color/发光颜色：Blue/蓝色 z Lens Type/封装特性：Water Clear/无色透明 z Device Outline/外形特征：2.0×1.25×1.1mm z RoHS compliant/符合 RoHS 标准 2、Applications/应 用： z Biaclight for Mobile，Machine Vision， LCD Display/手机、电话、显示屏背光源 z Backlight in Dashboard and swith of Automive/汽车仪表盘、记程器背光源 3、Outline Dimensions/产品外形尺寸： K R A M E D O H T A C 2 5 8 . 0 5 2 . 1 For reflow soldering 5 1 . 1 4 . 0 3 . 0 4 . 0 4 . 1 3 . 0 6 . 0 SPATIAL DISTRIBUTION 5 . 0 3 . 0 4 . 1 1.0 4 . 0 K R A M E D O H T A C 5 2 . 1 0.9 0.8 0.7 0.5 www.ledz.com R e v ：B/1 0.3 0.1 0 0.2 0.4 0.6 Page 1 of 10 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 4、Absolute maximum ratings/极限参数（Ta = 25℃） Parameter 参数 Power Dissipation 损耗功率 Reverse Voltage 反 向 电 压 Pulse Current 正向峰值电流 Forward Current 正向工作电流 Operating Temperature 工作温度范围 Storage Temperature 储存温度范围 Symbol 符号 Test Condition 测试条件 Pd Value 参数 Unit 单位 Min. Max. —— —— 70 mW VR IR = 30μA 5 —— V IFp Duty=0.1，1kHz —— 100 mA IFm —— —— 20 mA Topr —— -40 +85 ℃ Tstr —— -40 +85 ℃ 5、Electrical and optical characteristics/光电参数（Ta = 25℃） Parameter 参数 Forward Voltage 正向电压 Reverse Current 反向电流 Dominate Wavelength 主波长 Peak Wavelength 峰值波长 Spectral Line half-width 半波宽度 Luminous Intensity 发光强度 Viewing Angle 发光指向角 www.ledz.com Value 参数 Symbol 符号 Test Condition 测试条件 Min. Typ. Max. VF IF =20mA —— 3.3 3.7 V IR VR=5V —— —— 30 μA λd IF=20mA 465 —— 475 nm λp IF=20mA —— —— —— nm Δλ IF=20mA —— 30 —— nm IV IF=20mA —— 90 —— mcd 2θ1/2 IF=20mA —— 120 —— Deg. R e v ：B/1 Unit 单位 Page 2 of 10 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 6、Typical electrical/optical characteristic curves/光电特性曲线： 2.5 Luminous Intensity Relative Value at IF=20mA Forward Current(mA) 50 40 30 20 10 0 2.8 3.0 3.2 3.4 3.6 Forward Voltage(V) 30 20 10 100 80 20 40 60 Ambient Temperature TA (℃) Relative Luminous Intensity 0 www.ledz.com 1.5 1.0 0.5 0 0 10 20 30 40 IF-Forward Current (mA) 50 LUMINOUS INTENSITY Vs. AMBIENT TEMPERATURE FORWARD CURRENT DERATING CURVE 40 0 2.0 3.8 2.5 Relative Luminous Intensity 50 Forward Current(mA) LUMINOUS INTENSITY Vs. FORWARD CURRENT FORWARD CURRENT Vs FORWARD VOLTAGE 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 Ambient Temperature T A (℃) 100 100 75 50 25 0 400 450 500 600 550 Wavelength λ(nm) R e v ：B/1 650 700 Page 3 of 10 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 7、Relibility Analysis/可靠性分析 The reliability of products shall be satisfied with items listed below. Confidence level :90%；LTPD :10% 7.1 Test Items And Results/测试项目和结果 Spec. / 引用标准 Q’ty/ 数量 Time/时 间 20 2times ALL PASS 1times Over 95% ALL PASS 20 50cycles ALL PASS GB/T 4937， Ⅲ，4 20 6cycles ALL PASS Ta=100℃ GB/T 4937， Ⅲ，2 20 1000hrs ALL PASS Ta=-40℃ GB/T 4937， Ⅲ，2 20 1000hrs ALL PASS GB/T 18904.3 Part A 20 1000hrs Iv decay <30% No. Item/项目 Test Condition/测试条件 1 IR Reflow (Reflow Soldering) /回流焊接 Tsld=260℃，10sec 2 Solder ability/可焊性 Tsld=235±5℃，3sec 3 Temperature Cycle/高 低温循环 -40℃—— 100℃ 30min ~ 30min The cut is not more than 1 min GB/T 4937， Ⅲ，1 4 Moisture Resistance Cyclic /湿热循环 25℃/12hr~ 55℃/12hr 95%RH 5 High Temperature Storage /高温储存 6 Low Temperature Storage /低温储存 7 Steady State perating Life /电耐久性 GB/T 4937， Ⅱ，2.2 IF=20mA Ta=25℃ Standard/判定 7.2 Criteria For Judging Damage/判断标准 Symbol/ 符号 Test conditions /测试条件 Luminous Intensity/亮度 Iv Forward Voltage/正向电压 Reverse current/反向电流 Item/项目 Criteria for Judgement /判断标准 Min./最小值 Max./最大值 IF=20mA Iv*0.7 / VF IF=20mA / U.S.L*1.1 IR VR=5v / U.S.L*2 *U.S.L.：Upper Standard Level / 上限 *L.S.L.：Lower Standard Level / 下限 www.ledz.com R e v ：B/1 Page 4 of 10 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 8、Specification of Packing /包装规格 8.1 Taping and Orientation/编带和方向 Quantity/数量：3000 units/reel 60+0.5/-0 178±1.0 13.0±0.2 Diameter/直径：178 mm 9.0±0.5 Label sticking position www.ledz.com 12±0.15 R e v ：B/1 Page 5 of 10 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 8.2 Specification of Packing/包装规格 Diameter/直径 ： 178 mm Width/宽度 ： 12 mm =>3000 pcs / Reel (Anti-Static Shielding/抗静电保护袋) Thickness/厚度： T=0.1 mm => 1 Reel / Bag 5 Bags / Box 195mm => 15,000 pcs / Box 85mm 195mm www.ledz.com R e v ：B/1 Page 6 of 10 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 9、Notes/注意 9.1 Moisture Proof Packaging/防潮包装 9.1.1 LEDs need to package in moisture proof bag. When moisture is absorbed into the SMT package it may vaporize and expand during soldering. There is a possibility that this can cause exfoliation of the contacts and damage to the optical characteristics of the LEDs. For this reason, the moisture proof bag is used to keep moisture to a minimum in the bag. 产品必须包封装在防潮包装袋中。当湿气进入防潮包装袋的时候，在焊接时，湿气会 受热汽化膨胀，从而可能影响产品的光学特性，甚至造成封装胶体的开裂剥离。因此，防 潮袋要求放置在保持低湿度的盒中。 9.1.2 Moisture proof function is inactive. The moisture proof bag is made of an aluminum moisture proof bag. A package of a moisture absorbent material (silica gel) is inserted into the aluminum moisture proof bag. The silica gel turns the smashing from the transparent circular spherical pellet. 防潮的作用是缓慢的。防潮袋使用铝防潮袋，并在铝防潮袋中放入潮气吸收材料（硅 胶干燥剂）。当硅胶干燥剂吸收潮气后，硅胶干燥剂从透明圆形球状颗粒变成粉碎物。 9.2 Storage Method/储存方式 9.2.1 Before opening the bag: The LEDs should be used within a year and kept at 30℃ or less and 70%RH or less. The moisture proof bag with absorbent material is needed when storing the LEDs. 拆开包装袋之前：产品可以储存一年，但要求放置在温度低于30℃,湿度低于70%的环 境中；当存放产品时，必须放置在带有干燥剂的防潮容器中。 9.2.2 After opening the bag: The LEDs should be soldered within 72 hours after opening the package. If unused LEDs remain, they should be stored in moisture proof bags with moisture absorbent material. If the LEDs have exceeded the storage time or the moisture absorbent material has faded away. Baking process should be performed by using more than 24hours baking at 60±5℃ before using LEDs. It recommended that the user use the LEDs as soon as possible. www.ledz.com R e v ：B/1 Page 7 of 10 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 拆开包装袋之后：产品应该在拆封后的72小时内焊接完毕；如果没用完，产品应该储 存在带有干燥剂的防潮包装袋中；如果产品超出了使用期限或者干燥剂失效，那么产品在 使用前必须在60±5℃中烘烤至少24小时；建议客户尽快的使用完产品。 9.3 Heat Generation/产品热量的产生 Thermal design of the end applications are of paramount importance. Please consider the heat generation of the LED when making the system design. It is necessary to avoid intense heat generation and operate within the maximum ratings given in this specification. 应用产品的热学设计是至关重要的。在做系统设计时，请考虑LED的散热，避免热量 的积累，必须严格的在允许的温度范围内使用。 9.4 Soldering/焊接 9.4.1 Lead Solder/回流焊接 www.ledz.com R e v ：B/1 Page 8 of 10 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 9.4.2 Lead – Free Solder/无铅回流焊接 9.4.3 Hand Soldering（Not Recommended）/手工焊接（不推荐） Soldering iron/烙铁焊接：300 degrees C max/不超过300℃；5 seconds max/不超过5s； once/允许1次. 9.5 Cleaning/清洗 It is recommended that isopropyl alcohol be used as a solvent for cleaning the LEDs. It should be confirmed beforehand whether the solvents will dissolve the package the resin or not when using other solvents. Please do not clean the LEDs by the ultrasonic. If it is absolutely necessary, the influence of ultrasonic cleaning on the LEDs depends on ultrasonic power and the assembled condition. Before cleaning, a pre-test should be done to confirm whether any damage to the LEDs will occur. 建议使用酒精作为溶剂清洗LEDs。若要使用其他溶剂，应该预先证实是否能溶化封装 料。请不要使用超声波清洗LEDS，如果一定要使用超声波清洗，则一定要注意超声波的 功率和超声条件。在清洗作业前，必须预先实验确认对LEDs无任何的伤害。 www.ledz.com R e v ：B/1 Page 9 of 10 Hebei I.T. (Shanghai) Co., Ltd. SMD SPECIFICATION Part No./型号 08 05L BCT 9.6 Static Electricity/静电 It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that precautions be taken against surge voltage to the equipment that mounts the LEDs. 在接触LEDs时，建议使用防静电手腕带或防静电手套。所有的器件、设备和机器必须 有可靠的接地。对所有LEDs接触的设备，建议采取预防措施消除冲击电压。 9.7 Others/其他 The LED light output is strong enough to injure human eyes. Precautions must be taken to prevent looking directly at the LEDs with unaided eyes for more than a few seconds. LED的光辐射足够强时，会对人眼造成伤害。若眼睛要直接看LED，并且要一定的时 间，则必须采取相应防护措施。 www.ledz.com R e v ：B/1 Page 10 of 10