Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 Features z Top view Tri-Color LED ( 2.1 x 2.1 x 1.0 mm ) z High luminous Intensity z Low Power Dissipation z Base on AlGaInP (Red) / InGaN (Green\Blue) technology z Viewing angle ：Lambertian Emitter ( 105° ) z Reflow soldering z Good Reliability z Long Life z ESD protection z The product itself will remain within RoHS compliant version Typical Applications z Indoor and outdoor displays (e.g. displays for traffic; light writing displays) z LED chips can be controlled seperately to display various colors including white z Full color displays, RGB-Displays z General use www.ledz.com Page 1 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 Package Outline Dimensions Recommended soldering pad design Notes: All dimensions in mm tolerance is ± 0.05mm unless otherwise noted. www.ledz.com Page 2 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 Absolute Maximum Ratings Absolute maximum Rating Items Symbol Unit Red Green/Blue Power Dissipation PD 80 100 mW Forward Current(DC) IF 30 25 mA Peak Forward Current* IFP 100 80 mA Operation Temperature Topr -30~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering temperature Tsld Reflow soldering ：260℃ for 10 sec. Hand soldering ：350℃ for 3 sec. *Pulse width≦0.1msec duty≦1/10 Typical Electrical & Optical Characteristics Items Symbol Red Forward Voltage Dominant Wavelength Luminous Intensity Typ. Max. 1.8-2.5 15ma 2.8-3.5 Blue 10ma 2.8-3.5 Red 20ma 620 --- 630 15ma 520 --- 530 Blue 10ma 465 --- 475 Red 20ma 115 15ma 290 10ma 40 Green Green Green Red/Green/Blue 50% Power Angle www.ledz.com Min. 20ma VF WD IV Blue Reverse Current Condition Unit V nm mcd IR VR =5V*3 --- --- 1/1/1 μΑ 2θ½ IF = 20mA*3 --- 105 --- Deg Page 3 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 Typical Electrical/ Optical Characteristics Curves (Ta=25°C Unless Otherwise Noted) www.ledz.com Page 4 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 Reliability 1. Test Items And Results Number of Test Item Test Conditions Note Damaged Reflow Soldering Tsld=260℃，10 sec 3 time 0/100 High Temperature Storage TA=100℃ 1000 Hrs 0/100 Low Temperature Storage TA=-40℃ 1000 Hrs 0/100 1000 Hrs 0/100 300 Cycles 0/100 160 Cycles 0/100 1000 Hrs 0/100 (pre treatment 30℃,70%,168hrs) Temperature Humidity TA=85℃， Storage RH=90%RH Thermal Shock Test -40℃ ~ 100℃ 15min 15 min Temperature Cycling Test - 4 0 ℃ ~ 2 5 ℃ ~ 8 5 ℃ ~ 2 5 ℃ 30min 5min 30min 5min Operating Life Test TA=25℃ IF=20mA 2. Criteria for Judging The Damage Criteria for Judgment Item Symbol Test Conditions Min. Max. Forward Voltage VF IF =20mA --- Initial Data ×1.1 Luminous Intensity IV IF =20 mA Initial Data × 0.8 --- Reverse Current IR VR = 5V --- ≦1μA www.ledz.com Page 5 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 Recommend Reflow Soldering Profile Soldering reflow 1. Soldering of the SMD LEDs should conform to the soldering condition in the individual specifications. 2. SMD LEDs are designed for reflow soldering. 3. In the reflow soldering, too high temperature and too large temperature gradient such as rapid heating/cooling may cause electrical & optical failures and damages of the devices. 4. HB can’t guarantee the LEDs after they have been assembled using the solder dipping method. www.ledz.com Page 6 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 Reflow Soldering Hand Soldering Profile Feature Lead Solder Lead-free Solder Pre-heat temperature (Tsmin to Tsmax) 120~150 ℃ 180~200 ℃ Pre-heat time (Tsmin to Tsmax) 60-120 seconds 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3 ℃/second max. 3 ℃/second max. Liquidous temperature (TL) 183 ℃ 217 ℃ Time at liquidous (TL) 60-150 seconds 60-150 seconds Peak package body temperature(Tp)* 235~240 ℃ max. 255~260 ℃ max. Classification temperature(Tc) 240 ℃ 260 ℃ Time(Tp)**within 5℃ of the specified classification temperature(Tc) 20**seconds 30**seconds Average ramp-dawn rate（Tp to Tsmax） 6 ℃/second max. 6 ℃/second max. Time 25 ℃ to peak temperature 6 minutes max. 8 minutes max. Temperature Soldering time 350 ℃ max. 3 seconds max. (one time only) Note: 1. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. 2. ** Tolerance for time at peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. www.ledz.com Page 7 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 Soldering iron 1. When hand soldering, keep the temperature of the iron under 350℃, and at that temperature keep the time under 3 sec. 2. The hand soldering should be done only one time. 3. The basic spec is ≤ 3sec, when the temperature of 350℃, do not contact and put dress on the resin. 4. The temperature of the iron should be controllable. Rework 1. Customer must finish rework within 3 sec under 350℃. 2. The head of iron cannot touch the resin. 3. Twin-head type is preferred. 4. The temperature of the iron should be controllable. Notes: 1. There is possibility that the brightness of LEDs is decreased, which is influenced by heat or ambient atmosphere during reflow. It is recommended to use the Nitrogen reflow method use the nitrogen reflow method. 2. After LEDs have been soldered, repair should not be done. As repair is Unavoidable , a twin-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repairing or not. 3. Reflow soldering should not be done more than two times. www.ledz.com Page 8 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 Packing Specifications 1. Reel Dimensions and Carrier Tape Dimensions：Loaded Quantity 3500pcs Per Reel . Empty ports (50)pcs Looded ports (LED：3500pcs) Fedding Direction Empry ports(150)pcs Dimensions of Reel Feedding Direction Notes: The tolerance unless mentioned is±0.1, unit=mm. www.ledz.com Page 9 of 10 Hebei I.T. (Shanghai) Co., Ltd. Technical Data Sheet Top View LED Part No: PLCC4RGB-2121 2.Moisture Resistant Packaging A A B Reel Aluminum moisture-proof bag Desiccant P/N： Rank： Qty： Date： Lot No： B / / pcs QC： A: A Aluminum moisture-proof bag Label B：Desiccant A Outer box A Inner box Note: The tolerance unless mentioned is±0.1, unit=cm. www.ledz.com Page 10 of 10