PLCC2XW6

Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
·Customer:
Technical Data Sheet
PN: PLCC2XW6
For: IF=20mA
Contents
1.Features
2.Applications
3.Package dimensions
4.Absolute maximum rating
5.Electrical optical characteristics
6.BIN range
7.Soldering pad dimensions
8.Soldering conditions
9.Package tape specifications
10.Typical electro-optical characteristics curves
11.Reliability
12.Cautions
13.Notes
Customer confirm
Prepared date:Feb. 2011
Approved by
Checked by
www.ledz.com
Issued by
Rev.:2
Page 1 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
Part No.
PLCC2XW6
Emitted Color
Dominant White
Face Color
White
Chip Material
InGaN/GaN
Package
PPA
◆ Features:
Compatible with automatic placement equipment
Compatible with reflow solder process
Low power consumption and wide viewing angle
This product doesn’t contain restriction Substance, comply ROHS standard.
◆ Applications:
Automotive and Telecommunication
Flat backlight for LCD ,switch and symbol in telephone and fax
General use for indicators
Indoor lighting
◆ Package Dimensions:
3.5± 0.2
2.7± 0.2
2.2± 0.1
3.2± 0.2
1.9
2.4
cathode
anode
Unit:mm
Tolerance:±0.2mm
1.9
Electrodes: Ag Plating
Encapsulating Resin: Silicone with phosphor
Prepared date:Feb. 2011
www.ledz.com
Rev.:2
Page 2 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
◆ Absolute Maximum Rating (Ta=25℃)
Parameter
Symbol
Max.
Unit
Power Dissipation
PM
105
Mw
Pulse Forward Current
IFP
100
mA
DC Forward Current
IF
30
mA
Reverse Voltage
VR
5
V
Operating Temperature Range
Topr
-30℃~85℃
℃
Storage Temperature Range
Tstg
-40℃~100℃
℃
* IFP condition: pulse width ≤1ms ,duty cycle ≤1/10
◆ Electrical Optical Characteristics(Ta=25℃)
Parameter
Test
Symbol
Min
Typ.
Max.
Unit
Luminous Intensity
IV
1860
--
--
mcd
IF =20mA
Luminous Flux
¢
6.0
--
--
lm
IF =20mA
CCT
5000
--
7000
K
IF =20mA
Forward Voltage
VF
2.9
--
3.5
V
IF =20mA
Color Rendering Index
Ra
70
--
IF =20mA
Reverse Current
IR
--
--
10
uA
VR=5V
Spectral Line Half Width
Δλ
--
30
--
nm
IF=20mA
Viewing Angle
2θ1/2
--
120
--
Deg.
IF =20mA
Correlated Color Temperature
Condition
Notes: 1.Tolerance of Luminous Intensity±10%.
2.Tolerance of CCT ±150K.
3.Tolerance of Forward Voltage±0.05V.
4.Optical characteristic is measured by HB’s equipment.
Prepared date:Feb. 2011
www.ledz.com
Rev.:2
Page 3 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
◆ BIN range
Forward voltage (tolerance is ±0.05V @ IF=20mA):
BIN CODE
Min.(V)
Max. (V)
S
2.9
3.0
T
3.0
3.1
U
3.1
3.2
V
3.2
3.3
W
3.3
3.4
X
3.4
3.5
Luminous intensity (tolerance is ±10% @ IF=20mA ):
BIN CODE
Min.(mcd)
Max. (mcd)
S
1860
2170
T
2170
2480
U
2480
2790
Chromaticity Coordinates & Bin grading diagram(IF=20mA):
5300K
0.43
6000K
0.41
0.38
0.37
K
7000
0.39
6500K
0.40
5700K
0.42
5000K
0.44
D25
D19
D13
0.36
D27
D14
D7
D26
D20
D21
0.35
D8
D1
0.34
D28
D15
D22
D2
D29
D9
D16
0.33
D3
D10
D11
D5
0.31
D17
D30
D24
D4
0.32
D23
D18
D12
D6
0.30
0.29
0.28
0.28
0.29 0.30
Prepared date:Feb. 2011
0.31
0.32 0.33
0.34 0.35
0.36
www.ledz.com
Rev.:2
Page 4 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
Bin range of Chromaticity Coordinates (tolerance is ±0.005 @ IF=20mA):
Code
D25
D26
D27
D28
D29
D30
D13
D14
CCT(K)
5000~5300
5000~5300
5000~5300
5000~5300
5000~5300
5000~5300
5700~600
5700~6000
Prepared date:Feb. 2011
X
Y
0.3387
0.3832
0.3486
0.3915
0.3477
0.3807
0.3382
Code
X
Y
0.3287
0.3748
0.3387
0.3832
0.3382
0.3729
0.3729
0.3288
0.3650
0.3382
0.3729
0.3288
0.3650
0.3477
0.3807
0.3382
0.3729
0.3468
0.3700
0.3378
0.3626
0.3378
0.3626
0.3289
0.3552
0.3378
0.3626
0.3289
0.3552
0.3468
0.3700
0.3378
0.3626
0.3458
0.3593
0.3374
0.3523
0.3374
0.3523
0.3290
0.3453
0.3374
0.3523
0.3290
0.3453
0.3458
0.3593
0.3374
0.3523
0.3449
0.3485
0.3370
0.3420
0.3370
0.3420
0.3291
0.3554
0.3370
0.3420
0.3291
0.3554
0.3449
0.3485
0.3370
0.3420
0.3440
0.3378
0.3366
0.3317
0.3366
0.3317
0.3292
0.3255
0.3366
0.3317
0.3292
0.3255
0.3440
0.3378
0.3366
0.3317
0.3430
0.3271
0.3362
0.3214
0.3362
0.3214
0.3293
0.3156
0.3196
0.3666
0.3215
0.3387
0.3287
0.3748
0.3290
0.3453
0.3288
0.3650
0.3291
0.3554
0.3203
0.3574
0.3222
0.3294
0.3203
0.3574
0.3222
0.3294
0.3288
0.3650
0.3291
0.3554
0.3289
0.3552
0.3292
0.3255
0.3209
0.3481
0.3228
0.3200
D19
D20
D21
D22
D23
D24
D16
D17
www.ledz.com
CCT(K)
5300~5700
5300~5700
5300~5700
5300~5700
5300~5700
5300~5700
5700~6000
5700~6000
Rev.:2
Page 5 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
Code
D15
D7
D8
D9
D10
D11
D12
CCT(K)
5700~6000
6000~6500
6000~6500
6000~6500
6000~6500
6000~6500
6000~6500
X
Y
0.3209
0.3481
0.3289
0.3552
0.3290
0.3453
0.3215
Code
X
Y
0.3228
0.3200
0.3292
0.3255
0.3293
0.3156
0.3387
0.3234
0.3107
0.3091
0.3563
0.3000
0.3469
0.3196
0.3666
0.3091
0.3563
0.3203
0.3574
0.3103
0.3476
0.3103
0.3476
0.3017
0.3389
0.3103
0.3476
0.3017
0.3389
0.3203
0.3574
0.3103
0.3476
0.3209
0.3481
0.3114
0.3390
0.3114
0.3390
0.3033
0.3308
0.3114
0.3390
0.3033
0.3308
0.3209
0.3481
0.3114
0.3390
0.3215
0.3387
0.3126
0.3303
0.3126
0.3303
0.3050
0.3227
0.3126
0.3303
0.3050
0.3227
0.3215
0.3387
0.3126
0.3303
0.3222
0.3294
0.3138
0.3216
0.3138
0.3216
0.3067
0.3146
0.3138
0.3216
0.3067
0.3146
0.3222
0.3294
0.3138
0.3216
0.3228
0.3200
0.3149
0.3129
0.3149
0.3129
0.3083
0.3065
0.3149
0.3129
0.3083
0.3065
0.3228
0.3200
0.3149
0.3129
0.3234
0.3107
0.3161
0.3041
0.3161
0.3041
0.3100
0.2983
D18
D1
D2
D3
D4
D5
D6
CCT(K)
5700~6000
6500~7000
65000~7000
6500~7000
6500~7000
6500~7000
6500~7000
Please refer to CIE 1931 Chromaticity diagram
Prepared date:Feb. 2011
www.ledz.com
Rev.:2
Page 6 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
4.45
[0.175]
2.4
[0.094]
1.25
[0.049]
◆ Soldering Pad Dimensions:
Unit:mm
Tolerance:±0.2mm
◆ Soldering Conditions (Maximum allowable soldering conditions)
•
•
•
•
Reflow soldering should not be done more than two times.
Do not stress its resin while soldering.
After soldering, do not warp the circuit board.
Pay attention to electrostatic(ESD).
Prepared date:Feb. 2011
www.ledz.com
Rev.:2
Page 7 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
◆ Package Tape Specifications: (2000±2 pcs/Reel)
P2
D0
T
B0
W
F
5° MAX
E
B
PO
5° MAX
K0
B
A
A
D1
P1
A0
Unit:mn
symbol
spec
symbol
spec
A0
B0
2.90± 0.10
3.65± 0.10
E
1.75± 0.10
F
3.50± 0.05
K0
P1
P0
2.15± 0.10 4.00± 0.10
D0
4.00± 0.10 2.00± 0.05
W
10P0
8.00+0.30
40.0± 0.20
D1
1.55± 0.05
10MIN
P2
-0.01
T
0.25± 0.05
13
12.5
15.0
178
485mm
270m
500m
245m
160mm
290m
12 Reels in one Box
Prepared date:Feb. 2011
6 Boxes in one Carton
www.ledz.com
Rev.:2
Page 8 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
◆ Typical Electro-Optical Characteristics Curves:
If(mA)
50
5.0
40
4.0
30
3.0
20
2.0
10
1.0
0
Vf(V)
2.8
2.4
3.6
3.2
4.0
If(mA)
0.0
Forward Current vs. Forward Voltage
40
20
0
4.4
80
60
100
Relative Luminous Intensity vs. Forward Current
1.0
2.0
0.8
1.0
0.6
0.5
0.4
0.2
0.2
Ta( ℃)
0.1
WL(nm)
0.0
400
450
500
550
600
-40
650
-20
-10
0
10
20
30
40
60
80
100
Relative Luminous Intensity vs. Ambient Temperature
Relative Luminous Intensity vs. Wavelength
If(mA)
60
0°
100%
10°
50
20°
30°
40°
40
50°
30
60°
50%
20
70°
80°
10
Ta( ℃)
0
0
20
40
60
80
100
90°
0%
90°
30°
0%
50%
100%
Relative Luminous Intensity vs.Radiation Angle
Maximum Forward Current vs.Ambient Temperature
Prepared date:Feb. 2011
60°
www.ledz.com
Rev.:2
Page 9 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
◆ Reliability
(1)Test Items and Conditions
Test Item
Standard
Test Conditions
Test Method
A.TA=230±5℃
Reflow Soldering
Damaged
TIME=30-60S
B.TA=240±5℃ TIME=110-120S
JEITA ED-4701
300 301
Number of
Note
C.TA=260±5℃ TIME=10±1S
1 time
0/50
D.TA=230±5℃ TIME=30-60S
High Temperature
Storage
JEITA ED-4701
200 201
TA=100±5℃
1000 Hrs
0/50
Low Temperature Storage
JEITA ED-4701
200 202
TA=-40±5℃
1000 Hrs
0/50
Temperature Humidity
Storage
JEITA ED-4701
100 103
TA=85±5℃,RH=90%RH
1000 Hrs
0/50
Thermal Shock Test
JEITA ED-4701
300 307
-40℃
15min
100
Cycles
0/50
Temperature Cycling Test
JEITA ED-4701
100 105
-40℃ ~ 25℃
100
Cycles
0/50
1000 Hrs
0/50
Operating Life Test
~
100℃
10 Second 15 min
30min
15min
MIL-STD-750:1026
MIL-STD-883:1005 TA=25℃
JIS C 7021 :B-1
~100℃
~25℃
30min
15min
IF=20mA
(2)Criteria of judging the damage
Item
Symbol
Test Conditions
Forward Voltage
VF
Luminous
Intensity
Criteria for Judgment
Min.
Max.
IF =20 mA
---
Initial Data ×1.1
IV
IF =20 mA
Initial Data × 0.8
---
Reverse Current
IR
VR = 5V
---
≦50µA
Wave length
λD/λP
IF=Test Current
/
Initial Data±2nm
Appearance
/
View check
Prepared date:Feb. 2011
www.ledz.com
No mechanical damage
Rev.:2
Page 10 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
◆ Cautions
1、Package
When moisture is absorbed into the package it may vaporize and expand during soldering. There is a
possibility that this can cause exfoliation of the contacts and damage to the optical characteristics of the LEDs.
So the moisture proof package is used to keep moisture to a minimum in the package.
2、Storage
Before opening the package: The LEDs should be kept at 5~30°C and 60%RH or less. The LEDs should
be used within a year.
After opening the package: The LED must be used within 24 hours, else should be kept at 5~30℃ and
30% RH or less. The LEDs should be used within 7days after opening the package. If unused LEDs remain,
they should be stored in moisture proof packages, recommended to return the LEDs to the original moisture
proof bag and to reseal the moisture proof bag again.
If the LEDs have exceeded the storage time, baking treatment should be performed more than 24 hours at
60 ± 5°C.
3、Soldering Iron
Each terminal is to the tip of soldering iron temperature less than 300℃ for 3 seconds within once in less
than the soldering iron capacity 25 W.Leave two seconds and more internals, and do soldering of each
terminal. Be careful because the damage of the product is often started at the time of the hand solder.
4、Repairing
Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the
characteristics of the LEDs will or will not be damaged by repairing.
5、The LED electrode sections are comprised of a gold plated. The gold surface may be affected by
environments which contain corrosive gases and so on. Please avoid conditions which may cause the LED to
corrode or discolor. This corrosion or discoloration may cause difficulty during soldering operations. It is
recommended that the User use the LEDs as soon as possible.
6、Please avoid rapid transitions in ambient temperature, especially in high humidity environments where
condensation can occur.
Prepared date:Feb. 2011
www.ledz.com
Rev.:2
Page 11 of 12
Hebei I.T. (Shanghai) Co., Ltd.
Technical Data Sheet
Top View LED
7、Static Electricity
7.1、These products are sensitive to static electricity charge, and users are required to handle with care.
Particularly, if an current and or voltage which exceeds the Absolute Maximum Rating of Products is applied,
the overflow in energy may cause damage to, or possibly result in electrical destruction of, the Products. The
customer is requested to take adequate countermeasures against static electricity charge and surge when
handling Products.
7.2、Proper grounding of Products , use of conductive mat, conductive working uniform and shoes, and
conductive containers are effective against static electricity and surge.
7.3、Ground low-resistance areas where the product contacts, such as metal surfaces of the work platform,
with a conductive mat (surface resistance 106-108 Ω ).
7.4、A tip of soldering iron is requested to be grounded. An ionizer should also be installed where risk of
static generation is high.
◆ Notes:
1、Above specification may be changed without notice. We will reserve authority on material change for
above specification.
2、When using this product, please observe the absolute maximum ratings and the instructions for the
specification sheets. We assume no responsibility for any damage resulting from use of the product which
does not comply with the instructions included in the specification sheets.
Prepared date:Feb. 2011
www.ledz.com
Rev.:2
Page 12 of 12