2A Ultra Low Dropout Linear Regulator TJ4220 FEATURES • • • • • • • • • SOP8 / SOP8-PP Ultra Low Dropout Voltage Compatible with low ESR MLCC as Input/Output Capacitor Good Line and Load Regulation Guaranteed Output Current of 2A Available in SOP8, SOP8-PP, SOT-223 and TO-252 and TO-263 Packages Fixed Output Voltages : 1.0V, 1.2V, 1.8V, 2.5V, and 3.3V SENSE Option Improves Load Regulation Over-Temperature/Over-Current Protection -40 ºC to 125 ºC Junction Temperature Range SOT-223 3L TO252 3L / 5L PKG APPLICATION • • • • • • • LCD TVs and SETTOP Boxes Battery Powered Equipments Motherboards and Graphic Cards Microprocessor Power Supplies Peripheral Cards High Efficiency Linear Regulators Battery Chargers TO-263 3L / 5L PKG ORDERING INFORMATION Device DESCRIPTION Package TJ4220GD-ADJ The TJ4220 series of high performance ultra-low dropout linear regulators operates from 2.5V to 6V input supply and provides ultra-low dropout voltage, high output current with low ground current. Wide range of preset output voltage options are available. These ultra-low dropout linear regulators respond fast to step changes in load which makes them suitable for low voltage micro-processor applications. The TJ4220 is developed on a CMOS process technology which allows low quiescent current operation independent of output load current. This CMOS process also allows the TJ4220 to operate under extremely low dropout conditions. SOP8 TJ4220GD-X.X TJ4220GDP-ADJ SOP8-PP TJ4220GDP-X.X TJ4220xS-ADJ SOT-223 3L/5L TJ4220xS-X.X TJ4220GRS-ADJ TO-252 3L/5L TJ4220GRS-X.X TJ4220GR-ADJ TO-263 3L/5L TJ4220GR-X.X X.X = Output Voltage = 1.0, 1.2, 1.8, 2.5, and 3.3 Absolute Maximum Ratings CHARACTERISTIC SYMBOL MIN. MAX. UNIT Input Supply Voltage (Survival) VIN - 6.5 V Enable Input Voltage (Survival) VEN - 6.5 V Maximum Output Current IMAX - Lead Temperature (Soldering, 5 sec) TSOL Storage Temperature Range TSTG -65 TJOPR -40 Operating Junction Temperature Range ΘJA-SOP8-PP Package Thermal Resistance * 2 A 260 ºC 150 ºC 125 68 ºC ºC/W * Calculated from package in still air, mounted to 2.6mm X 3.5mm(minimum foot print) 2 layer PCB without thermal vias per JESD51 standards. Jun. 2011 – R1.0.6 1/14 HTC 2A Ultra Low Dropout Linear Regulator TJ4220 Ordering Information VOUT ADJ 1.0V 1.2V 1.8V 2.5V 3.3V Package Order No. Description Package Marking Status SOP8 TJ4220GD-ADJ 2A, Adjustable, Enable TJ4220G-ADJ Contact Us SOP8-PP TJ4220GDP-ADJ 2A, Adjustable, Enable TJ4220G-ADJ Active TO-252 5L TJ4220GRS-ADJ-5L 2A, Adjustable, Enable TJ4220G-ADJ Contact Us TO-263 5L TJ4220GR-ADJ-5L 2A, Adjustable, Enable TJ4220G-ADJ Contact Us SOP8 TJ4220GD-1.0 2A, Enable, SENSE TJ4220G-1.0 Contact Us SOP8-PP TJ4220GDP-1.0 2A, Enable, SENSE TJ4220G-1.0 Contact Us SOT-223 3L TJ4220S-1.0 2A 4220-1.0 Contact Us TO-252 3L TJ4220GRS-1.0-3L 2A TJ4220G-1.0 Contact Us TO-252 5L TJ4220GRS-1.0-5L 2A, Enable, SENSE TJ4220G-1.0 Contact Us TO-263 3L TJ4220GR-1.0-3L 2A TJ4220G-1.0 Contact Us TO-263 5L TJ4220GR-1.0-5L 2A ,Enable, SENSE TJ4220G-1.0 Contact Us SOP8 TJ4220GD-1.2 2A, Enable, SENSE TJ4220G-1.2 Contact Us SOP8-PP TJ4220GDP-1.2 2A, Enable, SENSE TJ4220G-1.2 Contact Us SOT-223 3L TJ4220S-1.2 2A 4220-1.2 Contact Us TO-252 3L TJ4220GRS-1.2-3L 2A TJ4220G-1.2 Contact Us TO-252 5L TJ4220GRS-1.2-5L 2A, Enable, SENSE TJ4220G-1.2 Contact Us TO-263 3L TJ4220GR-1.2-3L 2A TJ4220G-1.2 Contact Us TO-263 5L TJ4220GR-1.2-5L 2A ,Enable, SENSE TJ4220G-1.2 Contact Us SOP8 TJ4220GD-1.8 2A, Enable, SENSE TJ4220G-1.8 Contact Us SOP8-PP TJ4220GDP-1.8 2A, Enable, SENSE TJ4220G-1.8 Contact Us SOT-223 3L TJ4220S-1.8 2A 4220-1.8 Contact Us TO-252 3L TJ4220GRS-1.8-3L 2A TJ4220G-1.8 Contact Us TO-252 5L TJ4220GRS-1.8-5L 2A, Enable, SENSE TJ4220G-1.8 Contact Us TO-263 3L TJ4220GR-1.8-3L 2A TJ4220G-1.8 Contact Us TO-263 5L TJ4220GR-1.8-5L 2A ,Enable, SENSE TJ4220G-1.8 Contact Us SOP8 TJ4220GD-2.5 2A, Enable, SENSE TJ4220G-2.5 Contact Us SOP8-PP TJ4220GDP-2.5 2A, Enable, SENSE TJ4220G-2.5 Contact Us SOT-223 3L TJ4220S-2.5 2A 4220-2.5 Contact Us TO-252 3L TJ4220GRS-2.5-3L 2A TJ4220G-2.5 Contact Us TO-252 5L TJ4220GRS-2.5-5L 2A, Enable, SENSE TJ4220G-2.5 Contact Us TO-263 3L TJ4220GR-2.5-3L 2A TJ4220G-2.5 Contact Us TO-263 5L TJ4220GR-2.5-5L 2A ,Enable, SENSE TJ4220G-2.5 Contact Us SOP8 TJ4220GD-3.3 2A, Enable, SENSE TJ4220G-3.3 Contact Us SOP8-PP TJ4220GDP-3.3 2A, Enable, SENSE TJ4220G-3.3 Contact Us SOT-223 3L TJ4220S-3.3 2A 4220-3.3 Contact Us TO-252 3L TJ4220GRS-3.3-3L 2A TJ4220G-3.3 Contact Us TO-252 5L TJ4220GRS-3.3-5L 2A, Enable, SENSE TJ4220G-3.3 Contact Us TO-263 3L TJ4220GR-3.3-3L 2A TJ4220G-3.3 Contact Us TO-263 5L TJ4220GR-3.3-5L 2A ,Enable, SENSE TJ4220G-3.3 Contact Us Jun. 2011 – R1.0.6 2/14 HTC 2A Ultra Low Dropout Linear Regulator TJ4220 T J 4 2 2 0 G RS – A D J – 5 L Lead Count : 3L / 5L (Applied for TO252 & TO263 only) Output Voltage : ADJ / 1.0 / 1.2 / 1.8 / 2.5 / 3.3 Package Type D DP S RS R : SOP8 : SOP8-PP : SOT223 : TO252 : TO263 Material Class : Halogen Free G Blank : Pb Free Root Name Product Code PIN CONFIGURATION N.C 1 N.C 1 8 GND EN 2 7 ADJ / SENSE EN 2 VIN 3 6 VOUT VIN 3 N.C 4 5 N.C N.C 4 SOP8 TO252-3L 8 GND 7 ADJ / SENSE Exposed PAD 6 VOUT 5 N.C SOP8-PP TO252-5L SOT223-3L TO263-3L TO263-5L PIN DESCRIPTION Pin No. SOT223/TO252/TO263 3 LEAD TO252 / TO263 5 LEAD SOP8/SOP8-PP Name Function Name Function Name Function 1 VIN Input Supply EN Chip Enable - N.C. 2 GND Ground VIN Input Supply EN Chip Enable 3 VOUT Output Voltage GND Ground VIN Input Supply 4 - - VOUT Output Voltage - N.C. 5 - - SENSE/ADJ Remote Sense or Output Adjust - N.C. 6 - - - - VOUT Output Voltage 7 - - - - SENSE/ADJ Remote Sense or Output Adjust 8 - - - - GND Ground * Exposed Pad of SOP8-PP package should be externally connected to GND. Jun. 2011 – R1.0.6 3/14 HTC 2A Ultra Low Dropout Linear Regulator TJ4220 BASIC APPLICATION Typical 3 Pin Application VIN VIN VOUT VOUT TJ4220 CIN 10uF COUT 10uF GND Typical 5 / 8 Pin Application VIN VOUT VIN CIN 10uF VOUT TJ4220 EN EN GND COUT 10uF SENSE 5 / 8 Pin Remote Load Sense Application VIN VIN CIN 10uF VOUT VOUT TJ4220 EN EN GND L O A D COUT 10uF SENSE Typical Adjustable Version Application VOUT VIN VIN CIN 10uF TJ4220 EN EN GND VOUT Cff R2 ADJ COUT 10uF R1 * TJ4220 can deliver a continuous current of 2A over the full operating temperature. However, the output current is limited by the restriction of power dissipation which differs from packages. A heat sink may be required depending on the maximum power dissipation and maximum ambient temperature of application. With respect to the applied package, the maximum output current of 2A may be still undeliverable. * See Application Information. Jun. 2011 – R1.0.6 4/14 HTC 2A Ultra Low Dropout Linear Regulator TJ4220 ELECTRICAL CHARACTERISTICS(Note 1) Limits in standard typeface are for TJ=25ºC, and limits in boldface type apply over the full operating temperature range. Unless otherwise specified: VIN(Note 2) = VO(NOM) + 1 V, IL = 10 mA, CIN = 10 uF, COUT = 10 uF, VEN = VIN - 0.3 V PARAMETER Output Voltage Tolerance Adjustable Pin Voltage (ADJ version) SYMBOL VO VADJ TEST CONDITION VOUT+1 V < VIN < 5.5 V 2.5 V < VIN < 5.5 V MIN. TYP. MAX. UNIT -2 -3 0 2 3 % 0.784 0.776 0.8 0.816 0.824 V Line Regulation(Note 3) ΔVLINE VOUT+1 V < VIN < 5.5 V - 0.15 0.40 %/V Load Regulation(Note 3, 4) ΔVLOAD 10 mA < IL < 2 A - 0.20 0.50 0.60 % IL = 200 mA - 45 55 65 Dropout Voltage(Note 5) VDROP Ground Pin Current(Note 6) Ground Pin Current(Note 7) Power Supply Rejection Ratio IL = 2 A - 400 500 600 IL = 200 mA - 0.40 0.6 1.0 IL = 2 A - 0.40 0.6 1.0 VEN < 0.2 V - 0.5 1 2 f = 1kHz - 55 - f = 1kHz, CFF = 1uF - 65 - IGND IGND_OFF PSRR mV mA uA dB Current Limit ILIMIT - - 5 - A Thermal Shutdown Temperature TSD - - 165 - ºC Logic Low VIL Output = Low - - 0.4 V Logic High VIH Output = High 2.0 - - V IEN VEN = VIN - 0.1 1 uA Enable threshold Enable Input Current Note 1. Stresses listed as the absolute maximum ratings may cause permanent damage to the device. These are for stress ratings. Functional operating of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may remain possibly to affect device reliability. Note 2. The minimum operating value for input voltage is equal to either (VOUT,NOM + VDROP) or 2.5V, whichever is greater. Note 3. Output voltage line regulation is defined as the change in output voltage from the nominal value due to change in the input line voltage. Output voltage load regulation is defined as the change in output voltage from the nominal value due to change in load current. Note 4. Regulation is measured at constant junction temperature by using a 10ms current pulse. Devices are tested for load regulation in the load range from 10mA to 2A. Note 5. Dropout voltage is defined as the minimum input to output differential voltage at which the output drops 2% below the nominal value. Dropout voltage specification applies only to output voltages of 2.5V and above. For output voltages below 2.5V, the dropout voltage is nothing but the input to output differential, since the minimum input voltage is 2.5V Note 6. Ground current, or quiescent current, is the difference between input and output currents. It's defined by IGND1 = IIN - IOUT under the given loading condition. The total current drawn from the supply is the sum of the load current plus the ground pin current. Note 7. Ground current, or standby current, is the input current drawn by a regulator when the output voltage is disabled by an enable signal. Jun. 2011 – R1.0.6 5/14 HTC 2A Ultra Low Dropout Linear Regulator TJ4220 APPLICATION INFORMATION Introduction TJ4220 is intended for applications where high current capability and very low dropout voltage are required. It provides a simple, low cost solution that occupies very little PCB estate. Additional features include an enable pin to allow for a very low power consumption standby mode, an adjustable pin to provide a fully adjustable output voltage, and SENSE pin to provide better remote load regulation characteristics. Component Selection Input Capacitor : A large bulk capacitance over than 10uF/A(Output Load) should be closely placed to the input supply pin of the TJ4220 to ensure that the input supply voltage does not sag. Also a minimum of 10uF ceramic capacitor is recommended to be placed directly next to the VIN Pin. It allows for the device being some distance from any bulk capacitor on the rail. Additionally, input droop due to load transients is reduced, improving load transient response. Additional capacitance may be added if required by the application.(See Fig.1) Output Capacitor : A minimum ceramic capacitor over than 10uF/A(Output Load) should be very closely placed to the output voltage pin of the TJ4220. Increasing capacitance will improve the overall transient response and stability. Decoupling (Bypass) Capacitor : In very electrically noisy environments, it is recommended that additional ceramic capacitors be placed from VIN to GND. The use of multiple lower value ceramic capacitors in parallel with output capacitor also allows to achieve better transient performance and stability if required by the application.(See Fig.1) Feed-Forward Capacitor To get the higher PSRR than the inherent performance of TJ4220, it is recommended that additional ceramic feed-forward capacitor be placed from VOUT pin to ADJ pin. The capacitance of feed-forward capacitor with range of 10pF to 1uF allows to achieve better PSRR performance when required by the application.(See Fig.2) Fig. 1. Application with Decoupling Capacitor, CC1 & CC2 Fig. 2. Application with Feed-Forward Capacitor, CFF Delayed Start-Up When power sequence control is required or rising time of input supply voltage is over than 100usec, it is recommended to apply delayed start-up by using Cdelay as shown in Fig. 3. It can adjust proper delay by Rp-Cdelay time constant. And also it can prevent any unexpected transient characteristics at output voltage when the rising time of input supply voltage is as long as 100usec or longer. Fig. 3. Application with Delayed Start-Up Jun. 2011 – R1.0.6 6/14 HTC 2A Ultra Low Dropout Linear Regulator TJ4220 Output Adjustment (Adjustable Version) An adjustable output device has output voltage range of 0.8V to 5.0V. The operating condition of VIN and the operating characteristics of VOUT depend on the dropout voltage performance in accordance with output load current presented at Fig. 7. To obtain a desired output voltage, the following equation can be used with R1 resistor range of 100Ω to 50kΩ. VIN VIN CIN 10uF TJ4220 EN EN VOUT VOUT GND Cff R2 ADJ COUT 10uF R1 V R 2 R1 OUT 1 0 . 8 Fig. 4. Application for Adjustable Output Voltage To enhance output stability, a feed-forward capacitor of 10nF to 1uF can be placed in series with VOUT and ADJ.(Refer to "Component Selection" Section) SENSE Pin In applications where the regulator output is not very close to the load, the TJ4220 can provide better remote load regulation characteristics using the SENSE pin. TJ4220 regulates the voltage at the output pin. Hence, the voltage at the remote load will be lower than the voltage at the output pin as a value of the voltage drop across the trace series resistance. If the sense option pin is not required, the sense pin must be connected to the VOUT pin. Connecting the sense pin to the remote load will provide regulation at the remote load because the TJ4220 regulates the voltage at the sense pin when the sense option pin is used. Fig. 5. Conventional Linear Regulator Application Fig.6. Remote Load Sense Application Maximum Output Current Capability The TJ4220 can deliver a continuous current of 2A over the full operating junction temperature range. However, the output current is limited by the restriction of power dissipation which differs from packages. A heat sink may be required depending on the maximum power dissipation and maximum ambient temperature of application. With respect to the applied package, the maximum output current of 2A may be still undeliverable due to the restriction of the power dissipation of TJ4220. Under all possible conditions, the junction temperature must be within the range specified under operating conditions. The temperatures over the device are given by: TC = TA + PD X θCA TJ = TC + PD X θJC TJ = TA + PD X θJA Jun. 2011 – R1.0.6 7/14 HTC 2A Ultra Low Dropout Linear Regulator TJ4220 where TJ is the junction temperature, TC is the case temperature, TA is the ambient temperature, PD is the total power dissipation of the device, θCA is the thermal resistance of case-to-ambient, θJC is the thermal resistance of junction-to-case, and θJA is the thermal resistance of junction to ambient. The total power dissipation of the device is given by: PD = PIN – POUT = (VIN X IIN)–(VOUT X IOUT) = (VIN X (IOUT+IGND)) – (VOUT X IOUT) = (VIN - VOUT) X IOUT + VIN X IGND where IGND is the operating ground current of the device which is specified at the Electrical Characteristics. The maximum allowable temperature rise (TRmax) depends on the maximum ambient temperature (TAmax) of the application, and the maximum allowable junction temperature (TJmax): TRmax = TJmax – TAmax The maximum allowable value for junction-to-ambient thermal resistance, θJA, can be calculated using the formula: θJA = TRmax / PD TJ4220 is available in SOT223, SOP8-PP, TO252 and TO263 packages. The thermal resistance depends on amount of copper area or heat sink, and on air flow. If proper cooling solution such as heat sink, copper plane area, or air flow is applied, the maximum allowable power dissipation could be increased. However, if the ambient temperature is increased, the allowable power dissipation would be decreased. The graph above is valid for the thermal impedance specified in the Absolute Maximum Ratings section on page 1. Jun. 2011 – R1.0.6 8/14 HTC 2A Ultra Low Dropout Linear Regulator TJ4220 The θJA could be decreased with respect to the copper plane area. So, the specification of maximum power dissipation for an application is fixed, the proper plane area could be estimated by following graphs. Wider copper plane area leads lower θJA. The maximum allowable power dissipation is also influenced by the ambient temperature. With the θJACopper plane area relationship, the maximum allowable power dissipation could be evaluated with respect to the ambient temperature. As shown in graph, the higher copper plane area leads θJA. And the higher ambient temperature leads lower maximum allowable power dissipation. Jun. 2011 – R1.0.6 9/14 HTC 2A Ultra Low Dropout Linear Regulator TJ4220 TYPICAL OPERATING CHARACTERISTICS Test Circuit Vin VOUT VIN Cff 10K 10uF Vout EN R2 ADJ GND 10uF R1 Case 1 ( VIN = 3.3V, VOUT = 2.5V ) VIN : 1.0V/div, VIN : 1.0V/div, VOUT : 1.0V/div, Time : 50ms/div VIN : 1.0V/div, VOUT : 1.0V/div, Time : 50ms/div Start Up @ Iout=0A Start Up @ Iout=2A (Cff=10nF, R2=51KΩ, R1=24KΩ) (Cff=10nF, R2=51KΩ, R1=24KΩ) VOUT : 1.0V/div, Time : 50ms/div VIN : 1.0V/div, VOUT : 1.0V/div, Time : 50ms/div Start Up @ Iout=0A Start Up @ Iout=2A (Cff=10nF, R2=120KΩ, R1=56KΩ) (Cff=10nF, R2=120KΩ, R1=56KΩ) Jun. 2011 – R1.0.6 10/14 HTC 2A Ultra Low Dropout Linear Regulator VIN : 1.0V/div, VIN : 1.0V/div, IOUT : 1.0A/div, VOUT : 1.0V/div, Time : 50ms/div TJ4220 VIN : 1.0V/div, VOUT : 1.0V/div, Time : 50ms/div Start Up @ Iout=0A Start Up @ Iout=2A (Cff=1uF, R2=51KΩ, R1=24KΩ) (Cff=1uF, R2=51KΩ, R1=24KΩ) VOUT : 1.0V/div, Time : 50ms/div VIN : 2.0V/div, VEN : 2.0V/div, VOUT : 2.0V/div, Time : 5ms/div Start Up @ Iout=1A Start Up with Cdelay @ Iout=10mA (Cff is varied, R2=51KΩ, R1=24KΩ) (Cdelay is varied, Cff=10nF, R2=51KΩ, R1=24KΩ) VOUT : 20mV/div, Time : 500ms/div IOUT : 1.0A/div, VOUT : 20mV/div, Time : 500ms/div Load Transient Response Load Transient Response (Cff=10nF, R2=51KΩ, R1=24KΩ) (Cff=10nF, R2=51KΩ, R1=24KΩ) Jun. 2011 – R1.0.6 11/14 HTC 2A Ultra Low Dropout Linear Regulator VIN : 1.0V/div, VEN : 2.0V, VOUT : 2.0V/div, Time : 500us/div TJ4220 VIN : 1.0V/div, VEN : 2.0V, VOUT : 2.0V/div, Time : 500us/div Start Up by external VEN @ Iout=0A Start Up by external VEN @ Iout=2A (Cff=10nF, R2=51KΩ, R1=24KΩ) (Cff=10nF, R2=51KΩ, R1=24KΩ) Case 2 ( VIN = 2.5V, VOUT = 1.8V ) VIN : 1.0V/div, VIN : 1.0V/div, VOUT : 1.0V/div, Time : 20ms/div VIN : 1.0V/div, VOUT : 1.0V/div, Time : 20ms/div Start Up @ Iout=0A Start Up @ Iout=2A (Cff=10nF, R2=30KΩ, R1=24KΩ) (Cff=10nF, R2=30KΩ, R1=24KΩ) VOUT : 1.0V/div, Time : 20ms/div VIN : 1.0V/div, VOUT : 1.0V/div, Time : 20ms/div Start Up @ Iout=0A Start Up @ Iout=2A (Cff=10nF, R2=70KΩ, R1=56KΩ) (Cff=10nF, R2=70KΩ, R1=56KΩ) Jun. 2011 – R1.0.6 12/14 HTC 2A Ultra Low Dropout Linear Regulator VIN : 1.0V/div, VIN : 1.0V/div, IOUT : 1.0A/div, VOUT : 1.0V/div, Time : 20ms/div TJ4220 VIN : 1.0V/div, VOUT : 1.0V/div, Time : 20ms/div Start Up @ Iout=0A Start Up @ Iout=2A (Cff=1uF, R2=30KΩ, R1=24KΩ) (Cff=1uF, R2=30KΩ, R1=24KΩ) VOUT : 1.0V/div, Time : 20ms/div VIN : 1.0V/div, VEN : 1.0V/div, VOUT : 1.0V/div, Time : 5ms/div Start Up @ Iout=1A Start Up with Cdelay @ Iout=10mA (Cff is varied, R2=30KΩ, R1=24KΩ) (Cdelay is varied, Cff=10nF, R2=30KΩ, R1=24KΩ) VOUT : 20mV/div, Time : 500ms/div IOUT : 1.0A/div, VOUT : 20mV/div, Time : 500ms/div Load Transient Response Load Transient Response (Cff=10nF, R2=30KΩ, R1=24KΩ) (Cff=10nF, R2=30KΩ, R1=24KΩ) Jun. 2011 – R1.0.6 13/14 HTC 2A Ultra Low Dropout Linear Regulator VIN : 1.0V/div, VEN : 1.0V, VOUT : 1.0V/div, Time : 500us/div TJ4220 VIN : 1.0V/div, VEN : 1.0V, VOUT : 1.0V/div, Time : 500us/div Start Up by external VEN @ Iout=0A Start Up by external VEN @ Iout=2A (Cff=10nF, R2=30KΩ, R1=24KΩ) (Cff=10nF, R2=30KΩ, R1=24KΩ) Dropout Voltage @ Vout=2.5V Jun. 2011 – R1.0.6 14/14 HTC