Jumper Chip Hokuriku Electric Industry Co.,Ltd [Model Number] JPC** [Features] ■This is special sized jumper chip product. ■Since all sizes have common width of 0.5mm, 0.5mm, usability around tight circuit pattern improves. ■Complex wiring design will be eased, and freedom of circuit design increases. ■Since sizes of 4mm or longer use glassglass-epoxy substrate, benting strength・impact resistance are vastly improved. ■Availability of supply by taping enables mounting by normal mounter. ■Reflow, Flow solderings are applicable. ■Europe RoHS compliant product. [Dimensions] (Unit:mm) L c t W d Model No. L W t c d JPC20 JPC30 JPC40 JPC50 JPC60 2.00±0.15 0.50±0.10 0.35±0.05 0.25±0.10 0.25±0.10 3.00±0.15 0.50±0.10 0.35±0.05 0.25±0.10 0.25±0.10 4.00±0.15 0.50±0.10 0.35±0.05 0.25±0.10 0.25±0.10 5.00±0.15 0.50±0.10 0.35±0.05 0.25±0.10 0.25±0.10 6.00±0.15 0.50±0.10 0.35±0.05 0.25±0.10 0.25±0.10 [Specification] Model No. Rated current Internal resistance JPC20 JPC30 JPC40 JPC50 JPC60 1.4A 50 mΩ or less [Structure] JPC20 / JPC30 3 5 4 2 3 2 6 4 7 5 8 1 No. 1 2 3 4 5 6 7 8 JPC40 / JPC50 / JPC60 Element Name Ceramic substrate Back electrode Conductor Protective coat Ⅰ Protective coat Ⅱ Side electrode Ni plating Sn plating 6 1 No. 1 2 3 4 5 6 Element Name Glass epoxy substrate Conductor Overcoat Side electrode Ni plating Sn plating * Design・specification are subject to change without prior notice. Please check before purchase and use. HOKURIKU