CRCC Vishay Dale Thick Film, Rectangular, Resistor/Capacitor Chip FEATURES • Single component reduces board space and component counts • • • • • • Choice of Dielectric Characteristics X7R or Y5U Wrap around termination Thick film Resistor/Capacitor element Inner electrode protection Flow & Reflow solderable Automatic placement capability, standard size STANDARD ELECTRICAL SPECIFICATIONS SIZE RESISTOR GLOBAL POWER RATING TEMPERATURE TOL MODEL INCH METRIC COEFFICIENT P70 °C % W ppm/°C CAPACITOR VALUE RANGE Ω TEMPERATURE TOL. VOLTAGE RATING DIELECTRIC COEFFICIENT % VDC % CRCC1206 1206 3216 0.125 200 5 10R - 1M0 CRCC1206 1206 3216 0.125 200 5 10R - 1M0 RESISTOR • Operating Temperature Range: - 55 °C to + 125 °C • Technology: thick film VALUE RANGE pF X7R ± 15 20 50 10 - 270 Y5U + 22, - 56 20 50 270 - 1800 CAPACITOR • Operating Temperature Range: X7R - 55 °C to + 125 °C Y5U - 30 °C to + 85 °C • Maximum Dissipation Factor: 2.5 % Notes • Packaging: see appropriate catalog or web page • Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material TECHNICAL SPECIFICATIONS PARAMETER UNIT RESISTOR X7R CAPACITOR Rated Dissipation at 70 °C W 0.125 – – Capacitor Voltage Rating V – 50 50 Dielectric Withstanding Voltage (5 seconds, 50mA Charge) Vdc – 125 125 Category Temperature Range °C - 55/+ 155 - 55/+ 125 - 30/+ 85 Insulation Resistance Ω Weight/1000 pieces g > 1010 > 0.65 Y5U CAPACITOR 1010 > 1010 2 5.5 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CRCC1206472J220MTF (preferred part numbering format) C GLOBAL MODEL CRCC1206 R C C 1 RESISTANCE VALUE 2 digit significant figure, followed by a multiplier 100 = 10 Ω 683 = 68 kΩ 105 = 1.0 MΩ 2 0 6 RES. TOLERANCE F=±1% G=±2% J=±5% 4 7 2 J 2 CAPACITANCE VALUE (pF) 2 digit significant figure, followed by a multiplier 100 = 10 pF 271 = 270 pF 182 = 1800 pF 2 0 M T F CAP. TOLERANCE K = ± 10 % M = ± 20 % PACKAGING EA = Lead (Pb)-free, T/R (4000 pcs) TF = Tin/Lead, T/R (4000 pcs) Historical Part Number example: CRCC1206472J220MR02 (will continue to be accepted) CRCC1206 472 J 220 M R02 MODEL RESISTANCE VALUE RES. TOLERANCE CAPACITANCE VALUE CAP. TOLERANCE PACKAGING www.vishay.com 186 For technical questions, contact: [email protected] Document Number: 31045 Revision: 12-Jan-07 CRCC Thick Film, Rectangular, Resistor/Capacitor Chip Vishay Dale DIMENSIONS SIZE DIMENSIONS [in millimeters] INCH METRIC 1206 3216 L SIZE Rated Power in % W H T1 T2 3.2 ± 0.15 1.6 ± 0.15 0.55 ± 0.15 0.5 ± 0.25 0.5 ± 0.25 SOLDER PAD DIMENSIONS [in millimeters] REFLOW SOLDERING WAVE SOLDERING INCH METRIC a b l a b l 1206 3216 0.9 1.7 2.0 1.1 1.7 2.2 SCHEMATIC 120 100 80 60 40 20 0 - 55 - 25 0 25 Derating 50 75 100 125 150 175 70 Ambient Temperature in °C PERFORMANCE TEST RESULTS TEST CONDITIONS OF TEST Endurance Test at 70 °C MIL-Std-202 Method 108 1000 hours at 70 °C, 1.5 hours "ON", 0.5 hours "OFF" Dielectric Withstanding Voltage MIL-Std-202 Method 301 125 Vdc, 5 seconds, 50 mA charge Thermal Shock MIL-Std-202 Method 107 100 cycles, - 55 to + 125 °C ± (5 % + 2 Ω) ± 20 % Moisture MIL-Std-202 Method 106 Omit steps 7A and B ± (5 % + 2 Ω) ± 20 % Resistance to Soldering Heat EIA 575 10 seconds at 260 °C solder bath temperature ± (5 % + 2 Ω) ± 20 % High Temperature Exposure EIA 575 125 °C for 100 hours ± (5 % + 2 Ω) ± 20 % Low Temperature Operation EIA 575 1 hour at - 55 °C then 45 minutes at 50 V ± (5 % + 2 Ω) ± 20 % Solderability & Leaching EIA 575 3.12 Condition C R C ± (5 % + 2 Ω) ± 20 % no physical damage 95 % Coverage APPLICABLE SPECIFICATIONS • IPC Standards • EIA 575 Document Number: 31045 Revision: 12-Jan-07 For technical questions, contact: [email protected] www.vishay.com 187 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1