CRCC www.vishay.com Vishay Dale Thick Film Resistor/Capacitor Chip, Surface Mount FEATURES • Single component reduces board space and component counts • X7R dielectric characteristic • Wrap around termination • Thick film resistor/capacitor element • Inner electrode protection • Flow and reflow solderable • Automatic placement capability, standard size • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS RESISTOR CHARACTERISTICS GLOBAL MODEL CAPACITOR CHARACTERISTICS SIZE SIZE POWER TEMP. RESISTANCE RESISTANCE INCH METRIC RATING COEFF. TOLERANCE DIELECTRIC RANGE P70 °C ± ppm/°C ±% W CRCC1206 1206 3216 0.125 200 5 10 to 1M TEMPERATURE COEFFICIENT % CAP. TOL. ±% CAP. VOLTAGE VDC CAP. RANGE pF ± 15 20 50 10 to 270 X7R Notes RESISTOR CAPACITOR • Operating temperature range: -55 °C to +125 °C • Operating temperature range: X7R -55 °C to +125 °C • Technology: Thick film • Maximum dissipation factor: 2.5 % • Packaging: See appropriate catalog or web page. • Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material. TECHNICAL SPECIFICATIONS PARAMETER UNIT RESISTOR Rated dissipation at 70 °C W 0.125 - Capacitor voltage rating V - 50 Dielectric withstanding voltage (5 s, 50 mA charge) VDC - 125 Category temperature range °C -55 / +125 -55 / +125 Insulation resistance Weight/1000 pieces g > X7R CAPACITOR 1010 > 1010 0.65 2 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CRCC1206472J220MTF (preferred part numbering format) C GLOBAL MODEL CRCC1206 R C C 1 RESISTANCE VALUE 2 digit significant figure, followed by a multiplier 100 = 10 Ω 683 = 68 kΩ 105 = 1.0 MΩ 2 0 6 RES. TOLERANCE F=±1% G=±2% J=±5% 4 7 2 J 2 CAPACITANCE VALUE (pF) 2 digit significant figure, followed by a multiplier 100 = 10 pF 560 = 56 pF 271 = 270 pF 2 0 M T F CAP. TOLERANCE K = ± 10 % M = ± 20 % PACKAGING EA = Lead (Pb)-free, T/R (4000 pieces) TF = Tin/Lead, T/R (4000 pieces) Historical Part Number Example: CRCC1206472J220MR02 (will continue to be accepted) CRCC1206 472 J 220 M R02 MODEL RESISTANCE VALUE RES. TOLERANCE CAPACITANCE VALUE CAP. TOLERANCE PACKAGING Note • For additional information on packaging, refer to the Surface Mount Network Packaging document (www.vishay.com/doc?31540). Revision: 10-Sep-15 Document Number: 31045 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CRCC www.vishay.com Vishay Dale DIMENSIONS SIZE INCH METRIC 1206 3216 SIZE INCH METRIC 1206 Rated Power in % DERATING 3216 DIMENSIONS in millimeters L W H T1 T2 3.2 ± 0.15 1.6 ± 0.15 0.55 ± 0.15 0.5 ± 0.25 0.5 ± 0.25 SOLDER PAD DIMENSIONS in millimeters REFLOW SOLDERING WAVE SOLDERING a b l a b l 0.9 1.7 2.0 1.1 1.7 2.2 SCHEMATIC 120 100 80 60 40 20 0 - 55 - 25 0 25 50 75 100 125 150 175 70 Ambient Temperature in °C PERFORMANCE TEST Endurance test at 70 °C MIL-Std-202 method 108 Dielectric withstanding voltage MIL-Std-202 method 301 CONDITIONS OF TEST 1000 h at 70 °C, 1.5 h “ON”, 0.5 h “OFF” 125 VDC, 5 s, 50 mA charge TEST RESULTS (TYPICAL TEST LOTS) R C ± (5 % + 2 ) ± 20 % No physical damage Thermal shock MIL-Std-202 method 107 100 cycles, -55 °C to +125 °C ± (5 % + 2 ) ± 20 % Moisture MIL-Std-202 method 106 Omit steps 7A and B ± (5 % + 2 ) ± 20 % Resistance to soldering heat EIA 575 10 s at 260 °C solder bath temperature ± (5 % + 2 ) ± 20 % High temperature exposure EIA 575 125 °C for 100 h ± (5 % + 2 ) ± 20 % Low temperature operation EIA 575 1 h at -55 °C then 45 min at 50 V ± (5 % + 2 ) ± 20 % Solderability and leaching EIA 575 3.12 Condition C 95 % coverage APPLICABLE SPECIFICATIONS • IPC standards • EIA 575 Revision: 10-Sep-15 Document Number: 31045 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000