4GBJ406U GLASS PASSIVATED REVERSE VOLTAGE FORWARD CURRENT BRIDGE RECTIFIERS - 600Volts - 4.0 Amperes 4GBJ FEATURES ●Surge overload rating -150 amperes peak .995(25.3) .983(24.7) technique .118(3.0)*45° .157 (4.0) ●Mounting postition:Any ~ - ~ .150(3.8) .130(3.3) + .074(1.9) .059(1.5) .057(1.45) .041(1.05) .083(2.1) .069(1.7) .043(1.1) .035(0.9) .189(4.8) .173(4.4) .150(3.8) .134(3.4) .114(2.9) .098(2.5) .708(18.0) .669(17.0) classification 94V-0 .602(15.3) .578(14.7) ●The plastic material has UL flammability .382(9.7) .366(9.3) ? .134(3.4) ? .122(3.1) ●Reliable low cost construction utilizing molded plastic ? .134(3.4) ? .122(3.1) ● Ideal for printed circuit board .031(0.8) .023(0.6) .303(7.7) .303(7.7) .303(7.7) SPACING .287(7.3) .287(7.3) .287(7.3) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL 4GBJ406U UNIT Maximum Recurrent Peak Reverse Voltage VRRM 600 V Maximum RMS Voltage VRMS 420 V Maximum DC Blocking Voltage VDC 600 V Maximum Average Forward (with heatsink Note 2) Rectified Current @ TC=100℃ (without heatsink) Peak Forward Surge Current I(AV) 4.0 2.4 A IFSM 135 A Typical Forward Voltage at4.0A DC VF 0.89 V Maximum Forward Voltage at 4.0A DC VF 0.9 V 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum DC Reverse Current @ TJ=25℃ at Rated DC Blocking Voltage @ TJ=125℃ IR 10.0 120 μA I2t Rating for Fusing (t<8.3ms) I2t 76 A2s Typical Junction Capacitance Per Element (Note1) CJ 45 pF RθJC 2.2 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance Operating Temperature Range Storage Temperature Range NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 50mm*50mm*1.6mm Cu plate heatsink. 3.The typical data above is for reference only(典型值仅供参考). REV. 2, 18-Aug-2015 RATING AND CHARACTERTIC CURVES 4GBJ406U FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 5.0 WITH HEATSINK 4.0 3.0 WITHOUT HEATSINK 2.0 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD 1.0 0.0 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 150 TJ=25°C HALF-SINE-WAVE (JEDEC METHOD) 125 0 100 75 50 25 SINGLE HALF-SINE-WAVE (JEDEC METHOD) 0 0 5 2 CASE TEMPERATURE, °C 10 20 50 100 NUMBER OF CYCLETS AT 60Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-TYPICAL FORWARD CHARACTERISTICS 20.0 1000 TJ=150°C INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, AMPERES 10.0 1.0 0.1 TJ=25°C 0.01 0 0.2 0.4 0.8 0.6 1.0 TJ=125°C 100 TJ=100°C 10 TJ=25°C 1.0 1.4 1.2 INSTANTANEOUS FORWARD VOLTAGE. VOLTS 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) FIG.5-TYPICAL JUNCTION CAPACITANCE CAPACITANCE,(pF) 100 50 TJ=25°C,f=1MHZ 10 1.0 10.0 100 REVERSE VOLTAGE,(VOLTS) The cruve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)! REV. 2, 18-Aug-2015