GBU4005C thru GBU410C SILICON BRIDGE RECTIFIERS REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 4.0 Amperes GBU-C FEATURES ●Surge overload rating -150 amperes peak .156(3.95) .148(3.75) 3.2*3.2 CHAMFER .874(22.2) .860(21.8) ●Ideal for printed circuit board ●Reliable low cost construction utilizing .154(3.9) .146(3.7) .752(19.1) .720(18.3) molded plastic technique ●Plastic material has U/L flammability classification 94V-0 .232(5.9) .224(5.7) .079(2.0) .063(1.6) ●Mounting postition:Any .100(2.54) .085(2.16) .126(3.2) .114(2.9) .080(2.03) .065(1.65) .720(18.29) .680(17.27) .047(1.2) .035(0.9) .210 .190 (5.3) (4.8) .210 .190 (5.3) (4.8) .022(.56) .018(.46) .210 .190 (5.3) (4.8) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL GBU 4005C GBU 401C GBU 402C GBU 404C GBU 406C GBU 408C GBU 410C UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 30 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V CHARACTERISTICS Maximum DC Blocking Voltage Maximum Average Forward (with heatsink Note 2) Rectified Current @ TC=100℃ (without heatsink) 4.0 I(AV) 2.4 A Peak Forward Surage Current 8.3ms Single Half Sine-Wave IFSM 150 A VF 1.0 V Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 4.0A DC Maximum DC Reverse Current @ TJ=25℃ at Rated DC Blocking Voltage @ TJ=125℃ 10.0 IR 500 uA I2t Rating for Fusing (t<8.3ms) I2t 93 A2s Typical Junction Capacitance Per Element (Note1) CJ 45 pF RθJC 2.2 ℃/W TJ -55 to +125 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 50mm*50mm*1.6mm cu plate heatsink. ~ 281 ~ RATING AND CHARACTERTIC CURVES GBU4005C thru GBU410C FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 180 WITH HEATSINK PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 5.0 4.0 3.0 WITHOUT HEATSINK 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 1.0 0.00 0.1 0 20 40 60 100 80 120 140 160 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 120 80 40 0 0 CASE TEMPERATURE, °C 10 5 2 20 100 50 NUMBER OF CYCLETS AT 60Hz FIG.3-TYPICAL JUNCTION CAPACITANCE FIG.4-TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT, (A) 10 T J=25℃,f=1MHZ 1.0 0.1 1.0 10.0 100 1.0 T J = 25°C PULSE WIDTH 300us 0.1 0.01 0 REVERSE VOLTAGE,(VOLTS) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE,(pF) 10 TJ=125℃ 100 TJ=100℃ 10 TJ=50℃ 1.0 TJ=25℃ 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) ~ 282 ~ 1.8