Data Sheet Mechanical Drawing 5.0 MAX 10.35 MAX www.icecomponents.com IN12097 YYWW 6-1Fl., No. 111, Sec. 3, Chung-Hsin Road, San-Chung City, Taipei Hsien, Taiwan General Information Mitac Customer Customer P/N IN12097 ICE P/N 0 Revision Inductor Description AUG-31-2012 Date -Reference 1208-655P Doc Control # Issue(For ICE use only) -Specification Item Pins Spec Inductance DCR Isat at 25degC Idc 3.5 +/- 0.5 (Without solder tip) S F dia 1.6 +/- 0.1 unit:mm Sample Test Data Test Condition S–F 150 nH +/- 15% 500 kHz, 1Vrms, series (0Adc) S–F 102 nH min 500 kHz, 1Vrms, series (57Adc) S–F 0.2 mOhms +/- 5% 3 Isat at 125degC 10.0 MAX ICE Components, Inc. E-mail:[email protected] +25 deg C 57 Adc max 3 48 Adc max 4 33 Adc max Schematic S Remark Footprint F S 1. 2. 3. 4. 6.0 F unit:mm 5. 6. 7. 8. Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release This is RoHS compliant and halogen free product. The operating temperature is -40degC~ +130degC (ambient + temperature rise). Isat is the current at which the inductance drops by 20%. Idc is the DC current which causes the part temperature to increase by approximately 50degC. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes without any forced air cooling. Inductance vs. Current Curve as attached. BOM and UL File No list as attached. Packaging information: 100 pcs per tray, 1200 pcs per carton. The parts can withstand to dip solder at 260C for 10 seconds. PRD CHK Emily Gary APP Date L. L. Chou 2012/8/31 NTFY 2012/8/31 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN12097 Inductance vs. Current 100.0 % Inductance 90.0 +25 degC 80.0 70.0 +125 degC 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 Current (A) BOM & UL File No Materials : Item 1. Materials Core Specification Ferrite Core Mn-Zn material Polyester basecoat with a Polyamide-imide topcoat, rated 200deg C or ANSI MW 35C type, various manufacturers which are UL MW35C approved. (1.6mm) 2. Wire 3. Epoxy Emerson & Cuming ECCOBOND G500HF / G757HF 4. Solder Alpha Metals Sn 99.3 / Cu 0.7 UL No. -JUNG SHING E174837 JIUH FENG E169290 TATUNG CO E106004 P.E.W.C. E84081 P.E.W.C. E201757 HITACHI E215594 TA YA E84201 TAI - I E85640 TA WIN E152187 ESSEX E32638 --- PAGE 2 OF 2