Falcon III® Multi-channel Manpack features >>Covers 30 to 2500 MHz frequency range >>Provides 2 channels in 1 radio >>Is 30% smaller than other 2-channel manpacks >>Runs narrowband and wideband waveforms >>Integrated MUOS* without a separate Power Amplifier >>Embedded routing and cross-banding >>Optional 3rd slot for advanced mission capabilities *MUOS, ANW2, and WNW will be software upgrade The Falcon III® Multi-channel Manpack is a modular two-channel manpack radio designed to exceed the HMS Manpack program requirements, and covers the full 30-2500 MHz frequency range in a form factor 30% smaller than similar products. Each channel is capable of running a wide variety of Software Communications Architecture (SCA) narrowband and wideband waveforms – including the same waveform on both channels. Each channel can be used to transmit and receive simultaneously, using different frequency bands and/or waveforms. Embedded routing and cross-banding provide the ability to connect different nets and sub-nets for both voice and data. A defining feature of the Multi-channel Manpack is that no Power Amplifier (PA) change-outs or additions are required to switch between waveforms or to run Mobile User Objective System (MUOS)*. Fully integrated MUOS-capable PAs eliminate logistical complexity, cost, and further reduce size and weight. Additionally, a third slot accommodates an optional module that adds a variety of advanced capabilities. These embedded capabilities include Intelligence Surveillance and Reconnaissance (ISR) receiver, additional Mobile Ad-hoc Network (MANET) capabilities and Signals Intelligence (SIGINT). A standard interface is defined to provide vendors with the ability to create future enhancements on their own. The Multi-channel Manpack is able to store multiple mission fill files, providing maximum mission flexibility. Situational awareness is enhanced through an embedded SAASM GPS receiver that displays local position and provides automatic position reporting. Use of a single, standard lithium ion battery further reduces the weight of the radio while maintaining peak transmission power of up to 20 watts. The Multi-channel Manpack is Software Communications Architecture certified, compatible with JTRS Enterprise Network Manager (JENM) software, and provides full capability for network planning and monitoring. It is also compatible with the Harris AN/VRC-114 and RF-7800M-V series of Vehicular Amplifier Adapters utilized with the AN/PRC-117G. harris.com SPECIFICATIONS FOR: Falcon III® Multi-channel Manpack General POWER Number of Channels 2, +1 option module Power Input 19-34 VDC Power Consumption 55 W Max Battery Types BA-5590/U, BA-5390/U, BB-2590/U Frequency Range 30 MHz-2.5 GHz Narrowband (NB): VHF low: 30-90 MHz VHF high: 90-225 MHz UHF low: 225-512 MHz Wideband (WB): UHF 225-512 MHz, 764 MHz -2.5 GHz Channel Spacing environmental Shock/Vibration MIL-STD-810G for tracked and wheeled vehicles, ADTP-2404D Ballistic Shock Narrowband: 8.33 kHz, 12.5 kHz, 25 kHz Immersion 2 meter salt water (MIL-STD-810G) Wideband: 1.2 MHz, 5 MHz, 10 MHz Temperature EMI/RFI -40C to +55C MIL-STD-461F FM Deviation 5 kHz, 6.5 kHz, 8 kHz Net Presets 100 transmitter Management Tool Communications Planning Application (CPA) ; JENM Compatible Power Output Software Environment SCA v2.2.2 Narrowband: 10W Max SATCOM: 20W Max Wideband: 20W Max Internal GPS SAASM receiver (commercial GPS optional) Antenna Outputs Single 30-2500MHz N-connector per channel Frequency Stability 0.5 ppm Harmonic Suppression Greater than 50dBc Frequency Tuning 10 Hz from 30-512 MHz 100 Hz from 764 MHz-2.5 GHz Specifications receiver Narrowband Sensitivity (for 12 dB SINAD) LOS FM 30-512 MHz: -116dBm LOS AM 90-512: -110dBm with 70% modulation Adjacent Channel Rejection 40dB referenced to 12dB SINAD (50kHz channel) VHF: 60dB (50kHz off channel) UHF: 50dB (50kHz channel) Dimensions (no handles) 7.4 W x 3.5 H x 9 D inches 7.4 W x 3.5 H x 14 D in. (with battery) Volume 181 in3 (without battery) 264 in3 (with battery) Weight 8.8 lbs (without battery) 13.8 lbs (with battery) External Data USB, USB RNDIS Host and Device, Ethernet, RS-232 Color CARC Green 383 Audio Programming Remote Control Standard 6 Pin USB USB, RS-232, Remote Keypad Display Unit (KDU) INTERFACES MODES AND WAVEFORMS Narrowband Waveforms AM/FM, VHF/UHF LOS, SINCGARS, HAVEQUICK (SATURN, APCO P25 capable) Wideband Waveforms SRW (WNW, ANW2 capable) UHF SATCOM Waveforms MIL-STD-188-182A, 183A DAMA MIL-STD-188-181C, 183B IW Phase 1 (MUOS, HPW capable) Voice and Data Modes Simplex or Half Duplex MIL-STD-188-113 CVSD STANAG 4198 LPC-10e STANAG 4591 MELPe Transmission Modes AM, ASK, FM, FSK, PSK, CPM Harris Corporation RF Communications Division 1680 University Avenue Rochester, NY 14610, USA 585-244-5830 rf.harris.com harris.com Accessories 12043-4800-01 Battery Box RF-3150-AT122 VHF, 30-108 MHz NB Antenna RF-3162U-AT001 UHF, 225-450 MHz Antenna RF-3166L-AT001 L band 1250-1850MHz Antenna RF-5934-XX MCMP Backpack 12083-0707-A003 USB to Ethernet cable 12006-9005-01 Portable SATCOM Antenna 10075-1399 H-250 Handset 12043-2750-A006 USB Programming Cable RF-30XX Push on GPS Antenna 10553-0100-02 FIII Remote KDU 10535-0707-A020 Cable Assy, Speaker Audio 10535-2713-A020 Cable Assy, Speaker Power, VAU, Right Angle 10535-0706-A250 Cable Assy, Speaker Power 11080-3980-01 DC Switch Assy RF-3071-AT234 L1/L2 Vehicular GPS Antenna A30-1059-002 Handset, Mod H-250, Dual Audio RF-3143-AT320 Tri-Band Antenna 12172-3200-01 Vehicular Mount, Single MCMP 12172-3500-01 Vehicular Mount, Dual MCMP, 50W VHF This information was approved for all publishing per the ITAR as “basic marketing information of defense articles“ or as “advertising printed material” per the EAR. Specifications are subject to change without notice. © 2013 Harris Corporation 12/13 DS-561