® assuredcommunications® RF-5800H-MP advanced hf/VHF tactical radio system A fully integrated, compact communications system offering the security and performance features that missions demand The RF-5800H-MP is a member of the FALCON II® family of multiband tactical radio systems. It is an advanced HF-SSB/VHF-FM manpack radio that provides reliable tactical communications through enhanced secure voice and data performance, networking, and extended battery life. The transceiver’s extended frequency range (to 60 MHz) provides secure FSK 16 kbps CVSD voice and data in the VHF band in addition to the HF capability. It is like having two radios in one compact package. High speed data rates up to 9600 bps (HF) and selectable ARQ modes reduce on-the-air transmission time and enhance secure data transmissions for improved communications reliability and throughput. The combined robust digital voice (MELP, LPC-10) and serial tone data modem operate over poor communication channels. The RF-5800H-MP includes a last ditch voice mode and SMS-like messaging that transmit digitally, using ultra robust 3G waveforms for operation in channels where legacy waveforms will not work. A serial-tone ECCM waveform with DSP-based excision filtering and a 600 bps vocoder are combined to provide reliable, secure HF communications in the presence of jamming. Secure digital voice, 75 to 2400 bps data, and ARQ mode are supported in the ECCM mode. The latest third generation HF Link Automation, STANAG 4538, is included and provides high-performance ALE and data link protocols to deliver superior linking and error-free data transfer. The Harris Citadel® ASIC provides high-speed data and digital voice encryption using either a Harris-standard or a customer-unique algorithm. An internal Global Positioning System (GPS) receiver option provides local position information and Automatic Position Reporting (APR). This feature allows the radio to be used in situational awareness systems without PCs attached to the outstation radios. The accurate GPS timing data can be used for ECCM and advanced ALE synchronization. Integrated telephony capability allows the radio operator to place and receive telephone calls using the radio keypad when used with the RF-6010 Tactical Network Access Hub. The data capability and network management features of the RF-5800H-MP utilize industry standard IP-based protocols to provide fast, simple, and direct communications, and permit easy setup and maintenance of networks. The removable Keypad/Display Unit provides controls for on-the-move operation. tactical easy access to Specifications for the RF-5800H-MP Environmental General 1.6-59.999 MHz Test Method Per MIL-STD-810F Net Presets 75, fully programmable Vibration Ground tactical Frequency Stability ±0.5 x 10 Immersion 3 ft. (.9m) of water Operating Temperature –40˚ to +70˚C Emission Modes J3E (single sideband, upper or lower, suppressed carrier telephony) H3E (compatible AM single sideband plus full carrier) A1A, J2A (compatible CW), selectable; F3E (FM telephone) Encrypted Data HF: MIL-STD-188-110B App. C (9600 bps and 12,800 bps uncoded), App. B 39-tone (2400 bps), (maximum data rate) Serial Tone (2400 bps), STANAG 4285 (2400 bps), STANAG 4415 (75 bps), STANAG 4539 (9600 bps), FSK (600 bps) VHF: FSK (16 kbps) Automatic Link Establishment (ALE) STANAG 4538 FLSU, MIL-STD-188-141B Appendix A Frequency Hopping Serial Tone ECCM Vocoder HF: LPC-10-52E (600/2400), MELP (600/2400), VHF: CVSD Data Link Layer Protocol (ARQ) STANAG 4538 (3G), pFED-STD-1052 Frequency Range –6 RF Input/Output Impedance 50 ohm nominal, unbalanced Power Input 26 VDC (20.5-32 VDC) Data Interface Synchronous or asynchronous (RS-232C; MIL-STD-188-114A) Dimensions (with battery case) 10.5 W x 3.5 H x 13.2 D in. (26.7 W x 8.1 H x 34.3 D cm) Radio Weight 10 lbs. (4.7 kg) without batteries Receiver Features Sensitivity SSB: –113 dBm (0.5 µV) for 10 dB SINAD Audio Output 15 mW at 1000 ohm to external handset Squelch Front panel adjustable, active squelch selectable IF Rejection Greater than 80 dB Image Rejection Greater than 80 dB (1st IF image) RF-5800H-MP025 Citadel — AGC Mode dependent, automatically selected RF-5800H-MP026 Citadel Internal Intermodulation Distortion –80 dB or better for two –30 dBm signals separated 30 kHz or more RF-5800H-MP035 Datotek/Citadel — Overload Protection Receiver protected to 32 VRMS RF-5800H-MP036 Datotek/Citadel Internal RF-5800H-MP065 AES/Citadel — RF-5800H-MP066 AES/Citadel Internal System Configuration Digital Encryption Transmitter Power Output 1, 5, 20 watts PEP/Average -1/+2 dB (1, 5, 10 watts FM) Audio Input .5 mV at 150 ohm or 0 dBm at 600 ohm for full 1 rated output Carrier Suppression Greater than 60 dB below PEP output (J3E mode) Undesired Sideband Suppression Greater than 60 dB below PEP output Spurious Outputs (Greater than 20 kHz from Fc) Antenna Tuning Capability GPS Major System Components RF-5800H-V006 20-Watt Vehicular Adapter RF-5832H 125-Watt Power Amplifier RF-5833H 150-Watt Vehicular Adapter Unit RF-5834H 400-Watt Power Amplifier –50 dB relative to rated output, except harmonics which are –40 dB minimum for f = 1.6-30 MHz RF-5382H 150-Watt Antenna Coupler RF-382A 400-Watt Antenna Coupler OE-505 10-foot (3 m) whip (1.6-60 MHz) RF-1936P (AS-2259) NVIS (3.5-10 MHZ) RF-1940-AT001/RF-1941 dipole RF-5845H Pre/Postselector o RF Communications | 1680 University Avenue | Rochester, NY USA 14610 www.harris.com | 1-585-244-5830 Specifications are subject to change without notice. © Copyright 2009 Harris Corporation 02/09 DS-211L