Optoway SPS-4102WG 1 *********************************************************************************************************************************************************************** SPS-4102WG / SPS-4102BWG (RoHS Compliant) 3.3V / 1310 nm / 8.5 Gbps Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER *********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l l l l The SPS-4102WG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as 8x/4x/2x Fibre Channel. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a 1310 nm multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. l l l l l l Up to 8.5 Gb/s Bi-directional Data Link Complaint to SFP+ MSA Compliance with Fibre Channel FC-PI-4 800-SM-LC-I Compliant with 4x /2x Fibre Channel SFF-8472 Digital Diagnostic Function 1310 nm FP LD Transmitter Link Distance: 0 to 1400 m at 8.5 Gb/s, 0 to 5000 m at 4.25 Gb/s, and 0 to 10,000 m at 2.125Gb/s AC/AC Coupling according to MSA Single +3.3 V Power Supply RoHS 6/6 Compliant 0 to 70oC Operating: SPS-4102WG -10 to 85oC Operating: SPS-4102BWG Class 1 Laser International Safety Standard IEC-60825 Compliant LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l Multi-rate 8x / 4x / 2x Fibre Channel ORDER INFORMATION P/No. SPS-4102WG SPS-4102BWG Bit Rate (Gb/s) FC-PI Distance (m) Wavelength (nm) Package Temp. (oC) RoHS Compliant 8/4/2 FC-PI-4 1400* 1310 8/4/2 FC-PI-4 1400* 1310 SFP+ with DMI 0 to 70 Yes SFP+ with DMI -10 to 85 Yes *: 0 to 1400 m at 8.5 Gb/s, 0 to 5000 m at 4.25 Gb/s, and 10 km at FC 1x/2x. Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage Symbol Tstg Topr Vcc Min -40 0 -10 -0.5 Max 85 70 85 3.6 Units o C o C Notes SPS-4102WG SPS-4102BWG V Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Power Supply Current Data Rate Symbol Vcc Topr Min 3.13 0 -10 ICC (TX+RX) 1 Typ 3.3 250 8.5 Max 3.47 70 85 300 Units / Notes V o C / SPS-4102WG o C / SPS-4102BWG mA Gb/s *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 7/1/2007 V1.0 Optoway SPS-4102WG 2 *********************************************************************************************************************************************************************** Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Optical Modulation Amplitude Output Center Wavelength Output Spectrum Width Optical Rise / Fall Time (8.5Gb/s) Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, Avg Po, OMA λc σλ tr /tf RIN Min -8 0.29 1270 Typ Max 0 1310 2 1350 50 -128 -30 Units dBm mW nm nm ps dB/Hz dBm Notes 1 RMS (σ) 20 % to 80%,unfiltered 1. Output power is power coupled into a 9/125 µm single-mode fiber. Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Unstressed Sensitivity at 8.5 Gb/s Stress Sensitivity at 8.5 Gb/s Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Optical Return Loss Symbol Sens Sens P MAX LOSD LOSA λc ORL Min 0.5 ---25 1260 Typ --------- Max 0.042 -15 0.066 -15 --1565 -12 Units mWp-p dBm mWp-p dBm dBm dBm nm dB Notes 2, OMA 3, Average Power 2, OMA Transition: low to high Transition: high to low 2. Measured with worst ER; BER < 10-12 and PRBS 2 7-1. 3. Represents sensitivity based on OMA spec, as corrected to incoming Extinction Ratio of 7 dB. For example, an OMA of 0.042 mW is approximately equal to an average power of -15 dBm, average with an Extinction ratio of 7 dB. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min Typ 1 8.5 100 300 1 350 2.0 GND 2.4 GND Max 700 Gb/s Ω mVpp Gb/s Ω mVpp Vcc+0.3 0.8 Vcc 0.5 V V V V 1200 8.5 100 600 Units Notes Internally AC coupled Internally AC coupled ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 7/1/2007 V1.0 Optoway SPS-4102WG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN Signal Name 1 2 VEET TX_Fault 3 TX_Disable 4 SDA 5 SDL 6 7 MOD-ABS RS0 8 9 RX_LOS RS1 10 VEER Description PIN Signal Name Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground Description 11 12 VEER RD- Receiver Signal Ground Inverse Receiver Data Out 13 RD+ Receiver Data Out 14 VEER Receiver Signal Ground 15 VCCR Receiver Power – 3.3V±5% 16 17 VCCT VEET Transmitter Power – 3.3V±5% Transmitter Signal Ground 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 20 VEET Transmitter Signal Ground Module Definition Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 7/1/2007 V1.0 Optoway SPS-4102WG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 Tx_DISABLE 2 Tx_FAULT 10 KΩ TD + LD Driver 18 TD + Z=50Ω 100Ω TD - 19 TD Z=50Ω Vcc T 4 .7 μH 16 Vcc 3.3V 0.1μF 22 μF 0.1μF SerDes IC 0.1μF Vcc R 15 0.1μF RD - 22 μF 4 .7 μH 12 Protocol IC RD Z=50Ω 100Ω POST Amp RD + 13 RD + Z=50Ω depending on SERDES 10 KΩ LOS Vee R 30K Ω 8 RS1 9 RS0 7 30K Ω MOD_ABS EEPROM SCL SDA SFP+ module LOSS OF SINGAL ( 10,11,14) TX Rate Select RX Rate Select 6 MODU LE DETECT 5 SCL 4 SDA 10 KΩ 10 KΩ 10 KΩ Vcc 3.3V PACKAGE DIAGRAM Units in mm ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 7/1/2007 V1.0 Optoway SPS-4102WG 5 *********************************************************************************************************************************************************************** EEPROM Series ID Memory Contents (Address A0h) Addr. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Hex ASCII Note Addr. 03 SFP 32 04 33 07 LC 34 00 35 00 36 00 37 00 38 22 Intermediate(I),LC 39 00 40 01 Single Mode (SM) 41 54 8/4/2 GBd 42 01 8B/10B 43 55 8.5Gbps 44 00 45 01 1.4km 46 0E 1400m 47 00 48 00 49 00 50 00 51 Vendor name 4F O 52 50 P 53 54 T 54 4F O 55 57 W 56 41 A 57 59 Y 58 20 59 20 60 20 61 20 62 20 63 Hex ASCII Note 20 20 20 20 00 NA 00 Vendor IEEE OUI 0E FA 53 S Part Number 50 P 53 S 2D 34 4 31 1 30 0 32 2 57 W 47 G 20 20 20 20 20 20 30 0 Revision, 30 0 depended on version 30 0 30 0 1310 nm 05 1E 00 Reserved Checksum 0-62 Addr. 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 Hex ASCII Note Addr. 00 Txdis, Txfault, 96 LOS enable 97 1A 00 Up bit rate 98 00 Low bit rate 99 Serial 100 number: each 101 piece with 102 different serial 103 number 104 105 106 107 108 109 110 111 112 113 114 115 Date Code 116 117 118 119 120 121 122 123 68 Monitoring 124 F0 Soft Control 125 03 SFF-8472V10 126 Checksum 64-94 127 Hex ASCII Note 00 Vendor specific 00 EEPROM 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 7/1/2007 V1.0 Optoway SPS-4102WG 6 *********************************************************************************************************************************************************************** EEPROM Series ID Memory Contents (Address A2h) Addr. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Hex Note Addr. Hex Note Addr. Hex Note Addr. Hex Note 5A Temp. High 32 37 Rx Power High 64 00 For External Cal. 96 Real Time Temp. MSB Alarm (90oC) 33 2D Alarm (1413µW) 65 00 For External Cal. 97 Real Time Temp. LSB 00 FB Temp. Low 34 01 Rx Power Low 66 00 For External Cal. 98 Real Time Vcc MSB Alarm(-5oC) Alarm (27µW) 00 35 09 67 00 For External Cal. 99 Real Time Vcc LSB Real Time Tx Bias MSB 55 Temp. High 36 2B Rx Power High 68 00 For External Cal. 100 Warming(85 oC) Real Time Tx Bias LSB 00 37 D4 Warming (1122µW) 69 00 For External Cal. 101 Real Time Tx Pwr MSB 00 Temp. Low 38 01 Rx Power Low 70 00 For External Cal. 102 Warming (0 oC) Real Time Tx Pwr LSB 00 39 A4 Warming(42µW) 71 00 For External Cal. 103 8C Voltage High 40 00 Reserved 72 00 For External Cal. 104 Real Time Rx Pwr MSB Alarm (3.6V) Real Time Rx Pwr LSB A0 41 00 Reserved 73 00 For External Cal. 105 75 Voltage Low 42 00 Reserved 74 00 For External Cal. 106 Reserved Alarm(3.0V) 30 43 00 Reserved 75 00 For External Cal. 107 Reserved 88 Voltage High 44 00 Reserved 76 00 For External Cal. 108 Reserved Warming(3.5V) B8 45 00 Reserved 77 00 For External Cal. 109 Reserved Tx Dis, Tx Fault, Rx Los 79 voltage Low 46 00 Reserved 78 00 For External Cal. 110 Warming (3.1V) 18 Reserved 79 00 For External Cal. 111 Reserved 47 00 AF Tx Bias High 48 00 Reserved 80 00 For External Cal. 112 Alarm Flag Alarm(90mA) C8 49 00 Reserved 81 00 For External Cal. 113 Alarm Flag/Reserved 03 Tx BiasLow 50 00 Reserved 82 00 For External Cal. 114 Reserved Alarm(2mA) E8 51 00 Reserved 83 00 For External Cal. 115 Reserved 88 52 00 Reserved 84 00 For External Cal. 116 Warming Flag Tx Bias High Warming(70mA) 53 00 B8 Reserved 85 00 For External Cal. 117 Warming Flag/Reserved 07 54 00 Reserved 86 00 For External Cal. 118 Reserved Tx Bias Low Warming (4mA) D0 55 00 Reserved 87 00 For External Cal. 119 Reserved Vendor Specific 31 Tx Power High 56 00 For External Cal. 88 00 For External Cal. 120 2D Alarm (1259µW)) 57 00 For External Cal. 89 00 For External Cal. 121 04 Tx Power Low 58 00 For External Cal. 90 00 For External Cal. 122 Alarm(126µW) EB 59 00 For External Cal. 91 00 For External Cal. 123 27 Tx Power High 60 00 For External Cal. 92 00 For External Cal. 124 10 Warming(1000µW) 61 00 For External Cal. 93 00 For External Cal. 125 06 Tx Power Low 62 00 For External Cal. 94 00 For External Cal. 126 31 Warming (159µW) 63 00 For External Cal. 95 Check Sum 127 Note: Address 128 – 247: customer R/W eeprom. Address 248 – 255: Vendor Specific. Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 7/1/2007 V1.0