1400 PROVIDENCE HIGHWAY • BUILDING 2 NORWOOD, MASSACHUSETTS 02062-5015 WWW.INTRONICS.COM W10 SERIES DC/DC MODULES Applications • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The W10 Families of high efficiency DC/DC converters offer power levels of up to 10 Watt, which exceeds that of other bricks with the same Industry-Standard Pinouts, while providing much smaller footprints. With a wide input voltage range and single and multi-outputs, ranging from 5 to ±15 Volts, these converters provide versatility without sacrificing the board space. All models feature an input filter, output current limiting and short circuit protection. The fully enclosed, encapsulated construction achieves very efficient heat transfer with no hot spots. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. Model Num W10-12S5 W10-12S12 W10-12S15 W10-12D12 W10-12D15 W10-12D5 W10-24S5 W10-24S12 W10-24S15 W10-24D12 W10-24D15 W10-24D5 W10-48S5 W10-48S12 W10-48S15 W10-48D12 W10-48D15 W10-48D5 W10-5S5 W10-5S12 W10-5S15 W10-5D12 W10-5D15 W10-5D5 VIn 9-18 VDC 9-18 VDC 9-18 VDC 9-18 VDC 9-18 VDC 9-18 VDC 18-36 VDC 18-36 VDC 18-36 VDC 18-36 VDC 18-36 VDC 18-36 VDC 36-72 VDC 36-72 VDC 36-72 VDC 36-72 VDC 36-72 VDC 36-72 VDC 4.7-9 VDC 4.7-9 VDC 4.7-9 VDC 4.7-9 VDC 4.7-9 VDC 4.7-9 VDC VOut 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC IOut Min 100.0 mA 45.0 mA 35.0 mA ±25.0 mA ±20.0 mA ±50.0 mA 100.0 mA 45.0 mA 35.0 mA ±25.0 mA ±20.0 mA ±50.0 mA 100.0 mA 45.0 mA 35.0 mA ±25.0 mA ±20.0 mA ±50.0 mA 0.0 mA 0.0 mA 0.0 mA 0.0 mA 0.0 mA 0.0 mA IOut Max 2000 mA 830 mA 666 mA ±415 mA ±333 mA ±1000 mA 2000 mA 830 mA 666 mA ±415 mA ±333 mA ±1000 mA 2000 mA 830 mA 666 mA ±415 mA ±333 mA ±1000 mA 1600 mA 666 mA 533 mA ±333 mA ±266 mA ±800 mA INo Load 30.0 mA 30.0 mA 30.0 mA 40.0 mA 40.0 mA 40.0 mA 20.0 mA 20.0 mA 20.0 mA 20.0 mA 20.0 mA 20.0 mA 10.0 mA 10.0 mA 10.0 mA 10.0 mA 10.0 mA 10.0 mA 15.0 mA 15.0 mA 15.0 mA 15.0 mA 15.0 mA 15.0 mA IFull Load 1100.0 mA 1065.0 mA 1065.0 mA 1065.0 mA 1065.0 mA 1065.0 mA 535.0 mA 520.0 mA 520.0 mA 520.0 mA 520.0 mA 520.0 mA 260.0 mA 254.0 mA 254.0 mA 254.0 mA 254.0 mA 254.0 mA 2130.0 mA 2100.0 mA 2100.0 mA 2100.0 mA 2100.0 mA 2100.0 mA Eff 76% 78% 78% 78% 78% 78% 78% 80% 80% 80% 80% 80% 80% 82% 82% 82% 82% 82% 75% 76% 76% 76% 76% 76% Approval Pending Specifications & Features Summary • 500V, 10MΩ input-to-output isolation • No airflow or heatsink required • Enclosed six-sided metal shield construction for low EMI/RFI • Efficiency up to 82% • 2:1 Input Range • Pi Input Filter • Continuous Short Circuit Protection • Meets EN55022 Class A, Conducted • Delivers up to 10W in 2”x1” package with Industry-Standard Pinouts Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted. The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Consult factory for hundreds of other available input/output voltage configurations. General Specifications Input Filter Output Specifications Voltage Accuracy Single Output Voltage Accuracy Dual+Output Voltage Accuracy Dual-Output Voltage Balance Dual Output at Full Load Transient Response Single 25% Step Load Change Dual FL. 1/2 +/- 1% Error Band Ripple and Noise. 20MHz BW Temperature Coefficient Short Circuit Protection Line Regulation1 Single Dual/Output Load Regulation2 Single Dual/Output General Specifications Efficiency Isolation Voltage Isolation Resistance Switching Frequency Operating Temperature Range Case Temperature Cooling Storage Temperature Range EMI / RFI Dimensions Case Material Notes 1. 2. 3. Pi Type BOTTOM VIEW W10 FAMILY ±1.0% max. ±1.0% max. ±1.0% max. ±1.0% max. 3 0.20 [5.10] 1 4 2 <500u sec. <500u sec. 100mV p-p max. ±0.02% /oC max. Continuous ±0.2% max. ±1.0% max 0.40 [10.16] 0.40 [10.20] 0.80 [20.32] 1.00 [25.40] 5 0.60 [15.2] 0.10 [2.54] 0.80 [20.32] 2.00 [50.8] See Table 500VDC min. 109 ohms 200KHz min. -25oC to +71oC 100oC max. Free-Air Convection -40oC to +100oC Six sided Continuous Shield 2X1X0.4 Inches 0.22 min. [5.68] Black Coated Copper with Non-Conductive Base Pin # Measured From High Line to Low Line Measured From Full Load to 1/4 Load Minimum Load on the output is necessary to provide regulation 1 2 3 4 5 • W10 S(ingle) +Vin -Vin +Vout No Pin Vout - SIDE VIEW W10 D(ual) +Vin -Vin +Vout Common Vout - Tolerances Inches • XX ±0.040 • XXX ±0.010 • 0.40 [10.2] All dimensions are in inches [mm] All pins are dia. 0.040 [1.02] Pin material: Gold plated Brass Intronics, Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: 1-800-367-0004, 1-781-551-5500 Fax: 1-781-551-5555 Rev. A