asd 3 5 5 V I np u t 3 WAT T Modular DC/DC Converters series 24-Pin DIP Package 5 Volt Input 500 or 1500V Isolation Short Circuit Protection High Efficiency Input PI Filter Unit measures 0.8”W x 1.25”L x 0.4”H Model Number Output Voltage Output mAmps Input Range Efficiency SINGLE OUTPUT ASD35-5S3(H or M)* ASD35-5S5(H or M)* ASD35-5S12(H or M)* ASD35-5S15(H or M)* 3.3 VDC 5 VDC 12 VDC 15 VDC 600 600 250 200 4.5-6.0 VDC 4.5-6.0 VDC 4.5-6.0 VDC 4.5-6.0 VDC 64.00% 70.00% 75.00% 75.00% 4.5-6.0 VDC 4.5-6.0 VDC 4.5-6.0 VDC 70.00% 75.00% 75.00% DUAL OUTPUT ASD35-5D5(H or M)* +/-5 VDC +/-300 ASD35-5D12(H or M)* +/-12 VDC +/-125 ASD35-5D15(H or M)* +/-15 VDC +/-100 “H” versions only * Specifying “H” or “M” designates a choice of Pinouts (Please see Mechanical Specifications) and a choice of 500VDC Isolation (“M” Version) or 1500VDC Isolation (“H” Version). Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 asd 3 5 5 V I np u t 3 WAT T Modular DC/DC Converters INPUT SPECIFICATIONS Input Voltage Nominal Input Voltage Range: Input Filter GENERAL SPECIFICATIONS 5 VDC 4.5-6.0 VDC PI Type Input-Output Isolation Isolation Resistance Switching Frequency Safety See Selection Chart Single (10% to FL) +/- 0.5% Dual (25% to FL) +/-1% (HL-LL) +/- 0.5% +/-0.05%/°C 3.3V/5V 100mVp-p max. 12V/15V 1% p-p max. +/- 2% (Dual) +/- 1% Continuous See Selection Chart ENVIRONMENTAL SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage and Current Load Regulation Line Regulation Temperature Coefficient Ripple/Noise(Single/Dual) Voltage Accuracy Voltage Balance Short Circuit Protection Efficiency series 500VDC (“M” Versions) 1500VDC (“H” Versions) 10-9nth Ohm min. 100Khz UL60950 - “H” Versions Only Oper. Temperature Case Temperature Storage Temperature Cooling MTBF -25 to +71°C 100°C max. -40 to +100°C * Free Air Convection Single O/P 1,249,000 Hrs. Dual O/P 1,186,000 Hrs. MIL-HDBK-217F Ground Benign, 25°C PHYSICAL SPECIFICATIONS Case Material Construction Weight Dimensions All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM Black coated Copper w. Non-conductive base Fully Encapsulated 0.5 oz, (13g) 1.25”x0.8”x0.4” Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 asd 3 5 5 V I np u t 3 WAT T Modular DC/DC Converters series MECHANICAL DIMENSIONS NOTE: Pin Size is 0.02” Inch (0.5mm) DIA All Dimensions In Inches (mm) Tolerance .xx = +/-0.02, .xxx = +/- 0.010 “M” Version “H” Version Pin # Single Dual Single Dual 1 2 3 9 10 11 12 13 14 15 16 22 23 24 +Input NC NC No Pin -Output +Output -Input -Input +Output -Output No Pin NC NC +Input +Input -Output Common No Pin Common +Output -Input -Input +Output Common No Pin Common -Output +Input No Pin -Input -Input NC NC NC No Pin No Pin +Output NC -Output +Input +Input No Pin No Pin -Input -Input Common NC -Output No Pin No Pin +Output NC Common +Input +Input No Pin NC = No Connection with Pin WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181