MICRO SWITCH™ GLS Global Miniature (EN50047) Limit Switches GLC | GLD | GLE Series Datasheet MICRO SWITCH™ GLS Miniature (EN50047 Style) Limit Switches The Honeywell MICRO SWITCH™ GLS miniature limit switch family offers a wide range of products for global solutions. These durable and reliable limit switches are suitable for many industrial applications, agriculture equipment, transportation equipment, and other applications requiring an environmentally sealed (IP and NEMA) switch. The compact housings are often ideal for equipment where space is at a premium. The extensive product range is available in three different housing types; metal housing, plastic housing or a three conduit metal housing which are mounting compatible to EN50047. A wide range of actuators, contact blocks, and conduit/connectivity options enhance the product offering. In today’s demanding age of logic-level controls, electromechanical switches are frequently used to interface with PLCs and other logic level devices. GLS limit switches offer an option for gold-plated contacts for the standard switch. This option promotes the switch reliability for logic-level applications. What makes our switches better? Meets EN50047 mounting standards and EN/IEC electrical standards for world-wide use Large existing install base and channel allows for quick delivery worldwide Wide range of actuators and circuitry options in same footprint Certified for global use with CCC, CSA, CE, and UL acceptance Miniature global limit switch with heavy-duty ratings. EASY TO INSTALL AND MAINTAIN • GLOBAL RUGGED CONSTRUCTION • BUILT TO FIT 2 sensing.honeywell.com Features and Benefits HOUSING MATERIAL OPTIONS MICRO SWITCH™ GLS limit switches are manufactured with either a metal housing or double-insulated plastic housing for indoor and outdoor applications. FLEXIBLE OPERATING HEADS Full range of actuator heads can be positioned at 90° increments for design flexibility. Side rotary actuator heads can be factory set for CW, CCW, or CW and CCW actuation to meet application requirements. Removable contact block for wiring ease. BUILT FOR LONG LIFE Dual bearing design on side rotary actuators reduces side loading and enhances mechanical life. CIRCUITRY OPTIONS Wide variety of normally closed and normally open double-break snap-action or slow-action contact options are available with silver contacts for power switching or gold-plated contacts for low energy loads. Galvanically isolated contacts for controlling two separate circuits. CIRCUIT FLEXIBILITY Normally closed double break direct opening contacts conform to EN/IEC 60947-5-1-3 to provide forced opening of the normally closed contact. Each contact throw is electrically isolated to accept different voltages (Form Zb contacts) which provides circuit flexibility. Double pole double throw (2NC/2NO) contact option require same polarity for each pole. (Form Za for each pole). LOW TEMPERATURE FOR SEVERE ENVIRONMENTS -40 °C [-40 °F] standard construction for side rotary and plunger actuated switches are suitable for many severe outdoor environments. GLOBAL ACCEPTANCE With sealing up to IP66 and NEMA 4 for hostile environments, MICRO SWITCH™ GLS Series switches also carry CE, UL, CSA, CCC certification for global use. sensing.honeywell.com 3 Potential Applications PASSENGER ELEVATORS Buffer actuation, top stop, floor detection COMMERICAL APPLIANCES Door interlock switch ESCALATORS/MOVING STAIRS Side skirt detection, loose or missing tread, comb detection SCISSOR/PLATFORM LIFTS Pothole detection, outrigger position, boom extend/retract MATERIAL HANDLING Overhead doors MACHINE TOOL EQUIPMENT Part presence, machine slide/table position, panel and door presence OFF-ROAD EQUIPMENT • Agriculture planting and tillage equipment, stow position • Road construction equipment, panel & door interlock switches • Rail passenger door interlock switch • Position of motorized railroad switch 4 sensing.honeywell.com MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLS SERIES PRODUCT NOMENCLATURE GL C A 01 Switch Type Body Conduit Basic Switch GLS Series Global Limit Switch L A1A Side rotary, C Metal, miniature A 1/2-14 NPT 01 SPDT snap action 19 mm x A1A fixed, E7B 6 mm nylon roller D Plastic, miniature B PG 13.5 03 SPDT, BBM slow acting 19 mm x A1B fixed, 6 mm steel roller E Metal, three conduit C 20 mm 04 SPDT, MBB slow acting 19 mm x A2A adjust., 6 mm nylon roller K8A 05 DPST, 2NO slow acting 19 mm x K8B A2B adjust., 6 mm steel roller 06 DPST, 2NC slow acting 140 mm K8D A4J adjust., aluminum rod NOTE: not all combinations of model codes are available. Please contact your Honeywell provider/representative for assistance. Modification Codes Head/Actuator Side rotary, F ∆ Side rotary, Side rotary, Side rotary, Side rotary, SPDT, snap 200 mm 07 action, gold cont. A4L adjust., A1 aluminum rod For Actuator types beginning with A* Wobble, coil spring 1 CW rotation only Adj. top roller lever, Ø27,3 mm x 5 mm roller 2 CCW rotation only Cat whisker, 140 mm 3 Lever to right Cat whisker, 190 mm 4 Lever to left Cat whisker, 165 mm 5 Lever to mounting surf. for Side rotary, fixed, no roller Actuator/Type C Side rotary, Side rotary, adjustable, no roller Side rotary, Side rotary, fixed, 24 DPDT, snap action, Body E 19 mm x A5A offset, A2 6 mm nylon roller 32 DPDT, snap action, gold cont. Body E 19 mm x 50 mm x 10 mm A5B offset, 6 mm steel roller A1Y rubber roller 33 SPDT, BBM slow acting, gold contacts SPDT, MBB slow acting, gold contacts A9A conveyor lever 34 Side rotary, B Top pin plunger 35 DPST, 2NO slow acting, gold contacts C Top roller plunger 36 DPST, 2NC slow acting, gold contacts D Top roller lever 6 Side rotary, adj., for mm x 10 mm A2Y 50 rubber roller Available with D style body (plastic) only. ∆ Roller perpendicular to mtg. surf. Actuator/Type D 4 Lever to right, hinge to left *For Type A modification codes, more than one code may be permissible. For example, GLCA01A1B-13 is a side rotary, lever-actuated switch, GLCA01A1B, adjusted for clockwise actuation only. The operating shaft is to the right side of the switch when viewing the switch from the front (label side). sensing.honeywell.com 5 GLS Series Table 1. Specifications Characteristic Parameter Housing material GLC Series and GLE Series: Electrostatic epoxy coated zinc GLD Series: High-strength glass re-enforced thermoplastic Acutators Side rotary, top pin plunger, top roller plunger, top roller lever, top wobble actuator 0.5-14 NPT, PG 13,5, M20, PF 1/2, Deutsch style 4-pin connector other cable/connector options available, contact the Honeywell Representative Termination GLC metal housing and GLD plastic housing: 1NC/1NO, 2NC, 2NO GLE metal housing, 1NC/1NO, 2NC, 2NO, 2NC/2NO Contact options* Contact type snap-action, slow-action break-before-make (BBM), slow-action make-before-break (MBB), slow action Contact material silver (standard), gold plated (low-energy applications) 10 A Thermal current (Ith) Rated insulation voltage 300 V Rated impulse voltage 2.5 kV Sealing NEMA 1, 4, 12, 13; IP66 Operating temperature -40 °C to 85 °C [-40 °F to 185 °F] Mechanical life Up to 10 million cycles Pollution code 3 Max. actuation frequency 250 operations/minute; 100 operations/minute (wobbles) Shock 50 g per IEC 60068-2-27 Vibration 10 g per IEC 60068-2-6 Approvals CE, UL, CSA and CCC Conforming to standards CE, EN50047, IEC/EN 60947-5-1; CSA C22.2 #14; UL 508; CCC GB14048.5 *All normally closed contacts are positive opening . The two contact elements are Zb (electrically separated) except the 2NC/2NO contacts requires same polarity each pole (Za). Table 2. Electrical Ratings IEC 60947-5-1 (EN60947-5-1) AC 15, A300; DC 13, Q300 Silver Contacts Gold Contacts ac 6 dc A300 Ue AC15 Ie VA Volts Amps Make 120 6 7200 240 3 7200 sensing.honeywell.com Q300 Ue DC13 Ie VA Break Volts Amps Make Break 720 125 0.55 69 69 720 250 0.27 69 69 1 V 10 mA min. 50 V 100 mA max. MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLC SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 3. Side Rotary, Plastic Roller Contacts Contact Type Contact Mtl Conduit Silver 0.5-14 NPT Silver PG 13,5 Snap action 13 1NC/1NO 14 Zb Silver M20 Gold plated M20 Oper. Torque Bar Chart1 0° 0,12 Nm max. [1.1 in-lb max.] DT = 11,5° 22 Silver Zb 13 0.5-14 NPT Slow action 2 NO 14 Silver 2X GLCA01A1A GLCB01A1A GLCC01A1A 0.5-14 NPT GLCC07A1A 0° 36.5° 26° 39° FP OP 0,11 Nm max. [1.0 in-lb max.] 70° min. GLCA03A1A 21-22 13-14 OP2 0° 39° FP OP TT 70° min. 13-14 23-24 GLCA05A1A TT 24 23 1 0,11 Nm max. [1.0 in-lb max.] 14 13 TT RP = 14,5° BBM, slow action 1NC/1NO 54° 70° min. 22 21 21 26° Listing Contact closed n; Contact open o. *Positive opening occurs. Table 4. Side Rotary, Metal Roller Contacts Contact Type Contact Mtl Conduit Silver 0.5-14 NPT Silver PG 13,5 Snap action 1NC/1NO 13 14 Zb 22 21 Silver M20 Gold plated PG 13,5 Gold plated M20 BBM, slow action 1NC/1NO 0.5-14 NPT 22 21 Silver Zb 13 PG 13,5 14 MBB, slow action 21 1NC/1NO 0.5-14 NPT 22 Silver Zb 13 PG 13,5 14 Slow action 21 2 NC 22 Silver 2Y 11 PG 13,5 Oper. Torque Bar Chart1 0° 26° Listing 54° 70° min. GLCA01A1B GLCB01A1B 0,12 Nm max. [1.1 in-lb max.] DT = 11,5° TT GLCC01A1B GLCB07A1B GLCC07A1B RP = 14,5° 0,11 Nm max. [1.0 in-lb max.] 0,11 Nm max. [1.0 in-lb max.] 0,11 Nm max. [1.0 in-lb max.] 0° 36.5° 26° 39° FP OP 70° min. 21-22 13-14 OP2 TT 0° 26° 39° 50,5° 70° FP OP OP2 min. 21-22 13-14 26° 0° TT 46,5° GLCA03A1B GLCB03A1B GLCA04A1B GLCB04A1B 70° min. GLCB06A1B 21-22 11-12 FP TT 12 Contact closed n; Contact open o. *Positive opening occurs. 1 Table 5. Side Rotary Adjustable, Plastic Roller Contacts Contact Type Contact Mtl Conduit Snap action Silver 0.5-14 NPT Oper. Torque Bar Chart1 0° 13 14 Zb 22 21 1NC/1NO Silver PG 13,5 54° 70° min. GLCA01A2A 0,12 Nm max. [1.1 in-lb max.] DT = 11,5° TT GLCB01A2A RP = 14,5° BBM, slow action 22 21 Zb 13 14 Contact closed n; Contact open o. *Positive opening occurs. 1 26° Listing Silver PG 13,5 0,11 Nm max. [1.0 in-lb max.] 0° 36.5° 26° 39° FP OP 70° min. GLCB03A2A 21-22 13-14 OP2 TT sensing.honeywell.com 7 GLS Series MICRO SWITCH™ GLC SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 6. Side Rotary Adjustable, Metal Roller Contacts Contact Type Contact Mtl Conduit Silver 0.5-14 NPT Snap action 13 1NC/1NO 14 Silver PG 13,5 Gold plated PG 13,5 Silver M20 Gold plated M20 Zb MBB, slow action 1NC/1NO 22 Silver Zb 13 Bar Chart1 0° 1NC/1NO DT = 11,5° Silver Zb 0.5-14 NPT 0,11 Nm max. [1.0 in-lb max.] 22 Silver 2Y 11 GLCB07A2B M20 PG 13,5 GLCC07A2B 0,11 Nm max. [1.0 in-lb max.] 0,11 Nm max. [1.0 in-lb max.] 0° 26° 39° 50,5° 70° FP OP OP2 TT 0° 36.5° 26° 39° 70° FP OP min. 21-22 13-14 GLCA04A2B min. GLCC03A2B 21-22 13-14 Slow action 2NC TT RP = 14,5° 14 21 GLCA01A2B GLCC01A2B 14 22 13 Listing 54° 70° min. GLCB01A2B 0,12 Nm max. [1.1 in-lb max.] BBM, slow action 21 26° 22 21 21 Oper. Torque OP2 26° 0° TT 46,5° 70° min. 21-22 11-12 GLCB06A2B FP TT 12 Contact closed n; Contact open o. *Positive opening occurs. 1 Table 7. Side Rotary Adjustable, Metal Rod, A4J (140 mm rod) and A4L (200 mm rod) Contacts Contact Type Contact Mtl Conduit Oper. Torque Bar Chart1 Listing GLCA01A4J 0.5-14 NPT 0° Snap action 1NC/1NO 13 14 0,12 Nm max. [1.1 in-lb max.] Silver Zb 21 26° 54° 70° min. PG 13,5 DT = 11,5° TT GLCC01A4J M20 22 GLCB01A4J RP = 14,5° GLCB01A4L PG13,5 Contact closed n; Contact open o. *Positive opening occurs. 1 Table 8. Side Rotary Offset Lever, Metal Roller Contacts Contact Type Contact Mtl Conduit Oper. Torque Bar Chart1 0° Snap action 1NC/1NO 13 Silver GLCA01A5B 0,12 Nm max. [1.1 in-lb max.] 22 Silver 54° 70° min. 0.5-14NPT 14 Zb 21 26° Listing DT = 11,5° TT GLCB01A5B PG 13,5 RP = 14,5° Slow action 2NC 21 2Y 11 Silver 12 Gold plated Contact closed n; Contact open o. *Positive opening occurs. 1 8 sensing.honeywell.com 0.5-14 NPT 22 0.5-14 NPT 0,11 Nm max. [1.0 in-lb max.] 0° 26° 46,5° 70° min. GLCA06A5B TT GLCA36A5B 21-22 11-12 FP MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLC SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 9. Side Rotary Conveyor Lever, Ceramic Roller Contacts Contact Type Contact Mtl Conduit Oper. Torque Bar Chart1 0.5-14 NPT 0° 26° 54° 70° min. Snap action 13 1NC/1NO 14 Silver Zb PG 13,5 0,12 Nm max. [1.1 in-lb max.] Listing TT DT = 11,5° GLCA01A9A GLCB01A9A 22 21 M20 GLCC01A9A RP = 14,5° Contact closed n; Contact open o. *Positive opening occurs. 1 Table 10. Top Pin Plunger Contact Type Snap action 13 1NC/1NO 14 Zb 21 Contact Mtl Silver 0.5-14 NPT Silver PG 13,5 Silver M20 Gold plated PG 13,5 1NC/1NO 22 Zb 13 0.5-14 NPT Silver PG 13,5 14 MBB, slow action 21 1NC/1NO 22 Zb 13 Oper. Force Bar Chart1 16 N max. [3.6 lb max.] 2 NC 0.5-14 NPT Silver PG 13,5 14 22 2Y 11 1 Listing 16 mm 15 mm OT max. DT = 0,9 mm GLCA01B GLCB01B GLCC01B Silver PG 13,5 GLCB07B 18,9 mm RP 14 N max. [3.2 lb max.] OT 17,2 mm FP 18 mm 21 mm 17 mm 15 mm OT FP 16 N max. [3.6 lb max.] 13 N max. [2.9 lb max.] GLCA03B max. 21-22 13-14 21 mm 16,2 mm 18 mm 17 mm 15 mm FP GLCB03B GLCA04B max. 21-22 13-14 Slow action 21 18 mm 21 mm 22 BBM, slow action 21 Conduit * Contacts GLCB04B OT max. 21-22 11-12 GLCB06B 21 mm 18 mm 12 16,5 mm 15 mm Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. Table 11. Top Roller Plunger Contact Type Snap action 1NC/1NO 13 14 Zb 21 22 Contact Mtl Conduit Silver 0.5-14 NPT Silver PG 13,5 Gold plated PG 13,5 Silver M20 BBM, slow action 1NC/1NO 22 21 Zb 13 0.5-14 NPT Silver PG 13,5 14 Oper. Force Bar Chart1 1NC/1NO 22 Zb 13 OT DT = 0,9 mm [3.6 lb max.] 31 mm 14 N max. [3.2 lb max.] 2NC 22 2Y 11 1 PG 13,5 16 N max. [3.6 lb max.] 12 Gold plated Silver PG 13,5 PG 13,5 M20 13 N max. [2.9 lb max.] Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. 25 mm GLCA03C OT max. GLCB03C 27 26,2 FP OT max. 21-22 13-14 31 mm Silver GLCC01C 28 27,2 OP GLCB04C 28 27 25 FP OT max. 21-22 11-12 31 mm GLCB01C GLCB07C 21-22 13-14 FP GLCA01C max. 28,9 mm RP 14 Slow action 21 Silver 26 mm 25 mm 16 N max. MBB, slow action 21 28 mm 31 mm Listing * Contacts GLCB06C GLCB36C 28 mm 26,5 mm 25 mm GLCC06C sensing.honeywell.com 9 GLS Series MICRO SWITCH™ GLC SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 12. Top Roller Lever Contact Type Snap action 13 1NC/1NO 14 Zb Conduit Silver 0.5-14 NPT Silver PG 13,5 Gold plated PG 13,5 Silver M20 Silver 0.5-14 NPT Oper. Force Bar Chart1 BBM, slow action 22 21 Zb 13 14 21 22 Zb 13 GLCB01D 10 N max. [2.2 lb max.] DT = 1,3 mm GLCB07D Silver Gold plated PG 13,5 OP FP 9 N max. [2.0 lb max.] GLCB03D 39,5 PG 13,5 PG 13,5 21 Silver M20 22 2Y 12 11 Gold plated 0.5-14 NPT GLCA03D * 21-22 13-14 35,8 34,2 GLCB33D 34,5 OP FP Silver GLCC01D 37,1 mm RP 10 N max. [2.2 lb max.] 21-22 13-14 39,5 GLCB04D 35,8 14 Slow action 2NC GLCA01D 35,8 mm 39,5 mm MBB, slow action 1NC/1NO Listing 22 21 1NC/1NO Contact Mtl 8 N max. [1.8 lb max.] 32,9* 34,2 OP FP * Contacts GLCC06D 21-22 11-12 39,5 mm 35,8 mm GLCA36D 33,1 mm Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. 1 Table 13. Coil Spring Wobble, 130 mm Contacts Contact Type Contact Mtl Conduit Snap action Silver 0.5-14 NPT Silver PG 13,5 Silver M20 Gold plated PG 13,5 Silver 0.5-14 NPT 13 1NC/1NO 14 Zb 21 22 Oper. Force Bar Chart1 Listing GLCA01E7B 1,3 N max. [0.29 lb] max. GLCB01E7B TT GLCC01E7B GLCB07E7B BBM, slow action 1NC/1NO 22 21 Zb 13 1,1 N max. [0.25 lb] max. GLCA03E7B OP 14 Slow action 2NC 21 22 2Y 11 Silver 0.5-14 NPT 1,1 N max. [0.25 lb] max. 0° 16° 35° 21-22 11-12 FP OP TT GLCA06E7B max. 12 Contact closed n; Contact open o. 1 Table 14. Cat Whisker Wobble, 140 mm Contacts Contact Type Contact Mtl Conduit Oper. Force Bar Chart1 Listing GLCA01K8A 0.5-14 NPT Snap action 1NC/1NO 13 14 Zb 21 0,9 N max. [0.19 lb] max. Silver 22 PG 13,5 Contact closed n; Contact open o. 1 10 sensing.honeywell.com TT GLCB01K8A MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches Table 15. Cat Whisker Wobble, 190 mm Contacts Contact Type Contact Mtl Snap action 13 1NC/1NO 14 Oper. Force Bar Chart1 Listing GLCA01K8B 0.5-14 NPT 0,9 N max. [0.19 lb] max. Silver Zb 21 Conduit TT GLCB01K8B PG 13,5 22 BBM, slow action 1NC/1NO Zb 13 1 22 21 Silver 0.5-14 NPT 0,7 N max. [0.16 lb] max. GLCA03K8B OP 14 Contact closed n; Contact open o. Figure 1. GLC Side Rotary • A1, A1A, A1B, and A1Y Figure 4. GLC Side Rotary • A5A and A5B 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 2. GLC Side Rotary • A2, A2A, A2B, and A2Y Figure 5. GLC Side Rotary • A9A 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 3. GLC Side Rotary Rod • A4J (140 mm) & A4L (200 mm) 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 6. GLC Top Pin Plunger 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. sensing.honeywell.com 11 GLS Series Figure 7. GLC Top Roller Plunger Figure 9. GLC Wobble • E7B 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 8. GLC Top Roller Arm Figure 10. GLC Wobble • K8A/K8B or or 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 11. GLC Conduit 12 sensing.honeywell.com MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLD SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 16. Side Rotary, Plastic Roller Contacts Contact Type Contact Mtl Conduit Silver 0.5-14 NPT Silver PG 13,5 Snap action 1NC/1NO 13 14 Zb Gold plated PG 13,5 Silver M20 22 21 BBM, slow action 1NC/1NO 0.5-14 NPT 22 21 Silver Zb 13 PG 13,5 14 Oper. Torque Bar Chart1 0° 0,12 Nm max. [1.1 in-lb max.] 1NC/1NO 22 Silver Zb 13 PG 13,5 2NO 13 14 Silver 2X 0° 0,11 Nm max. [1.0 in-lb max.] M20 0,11 Nm max. [1.0 in-lb max.] 0,11 Nm max. [1.0 in-lb max.] 2NC 22 Silver 2Y 11 M20 0,11 Nm max. [1.0 in-lb max.] 26° FP GLDB07A1A GLDC01A1A 36.5° 39° 70° min. OP OP2 0° 26° 39° FP OP OP2 0° 39° FP OP GLDA03A1A GLDB03A1A TT 50,5° 70° min. 21-22 13-14 GLDB04A1A TT 70° min. GLDC05A1A 13-14 23-24 Slow action 21 GLDB01A1A TT 21-22 13-14 24 23 GLDA01A1A RP = 14,5° 14 Slow action Listing 54° 70° min. DT = 11,5° MBB, slow action 21 26° 26° 0° TT 46,5° 70° min. 21-22 11-12 GLDC06A1A FP TT 12 Contact closed n; Contact open o. *Positive opening occurs. 1 Table 17. Side Rotary, Metal Roller Contacts Contact Type Contact Mtl Conduit Silver 0.5-14 NPT Silver PG 13,5 Gold plated PG 13,5 Silver M20 Gold plated M20 Snap action 1NC/1NO 13 14 Zb 21 22 BBM, slow action 1NC/1NO 22 21 Zb 13 0.5-14 NPT Silver PG 13,5 14 2NC 22 2Y 11 12 Bar Chart1 0° Silver PG 13,5 M20 26° Listing 54° 70° min. 0,12 Nm max. [1.1 in-lb max.] DT = 11,5° GLDB07A1B TT GLDC01A1B GLDC07A1B RP = 14,5° 0,11 Nm max. [1.0 in-lb max.] 0,11 Nm max. [1.0 in-lb max.] GLDA01A1B GLDB01A1B 0° 36.5° 26° 39° FP OP 70° min. 21-22 13-14 0.5-14 NPT Slow action 21 Oper. Torque 0° 26° OP2 46,5° TT 70° min. GLDA03A1B GLDB03A1B GLDA06A1B GLDB06A1B 21-22 11-12 FP TT GLDC06A1B Contact closed n; Contact open o. *Positive opening occurs. 1 sensing.honeywell.com 13 GLS Series MICRO SWITCH™ GLD SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 18. Side Rotary Adjustable, Plastic Roller Contacts Contact Type Contact Mtl Conduit Oper. Torque Bar Chart1 0.5-14 NPT Snap action 1NC/1NO 13 Silver 14 Zb PG 13,5 M20 22 21 PG 13,5 Gold plated 0° DT = 11,5° 1NC/1NO Silver Zb 13 PG 13,5 2NO 13 14 Silver 2X 0,11 Nm max. [1.0 in-lb max.] 21-22 13-14 0,11 Nm max. [1.0 in-lb max.] 13-14 23-24 26° 36.5° 39° 70° min. GLDB03A2A FP OP OP2 0° 39° FP OP TT 70° min. GLDC05A2A TT 24 23 Slow action 21 2NC Silver 0.5-14 NPT 22 2Y Silver 12 11 1 M20 GLDB07A2A RP = 14,5° 14 Slow action GLDB01A2A TT GLDC01A2A PG 13,5 0° 22 GLDA01A2A 54° 70° min. GLDB01A2** 0,12 Nm max. [1.1 in-lb max.] BBM, slow action 21 26° Listing PG 13,5 0,11 Nm max. [1.0 in-lb max.] 26° 0° 46,5° 70° min. GLDA06A2A TT GLDB06A2A 21-22 11-12 FP Contact closed n; Contact open o. *Positive opening occurs. ** No roller Table 19. Side Rotary Adjustable, Metal Roller Contacts Contact Type Snap action 1NC/1NO 13 Contact Mtl Conduit Silver 0.5-14 NPT Gold plated 0.5-14 NPT Silver PG 13,5 Gold plated PG 13,5 Silver M20 14 Zb 22 21 MBB, slow action 1NC/1NO 21 22 Silver 0.5-14 NPT Zb 13 Oper. Torque Bar Chart1 0° 13 14 24 Contact closed n; Contact open o. *Positive opening occurs. 1 14 sensing.honeywell.com GLDA01A2B DT = 11,5° TT GLDB01A2B GLDB07A2B GLDC01A2B RP = 14,5° 0,11 Nm max. [1.0 in-lb max.] 21-22 13-14 0,11 Nm max. [1.0 in-lb max.] 13-14 23-24 0° 26° 39° FP OP OP2 50,5° 70° min. GLDA04A2B TT 14 2X 23 54° 70° min. GLDA07A2B 0,12 Nm max. [1.1 in-lb max.] Slow action 2NO 26° Listing Silver 0.5-14 NPT 0° 39° FP OP 70° min. GLDA05A2B TT MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLD SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 20. Side Rotary Adjustable, Metal Rod Contacts Contact Type Contact Mtl 13 Silver 14 PG 13,5 Zb 21 Oper. Force Bar Chart1 0° 0.5-14 NPT Snap action 1NC/1NO Conduit 22 DT = 11,5° M20 1NC/1NO Silver Zb 13 M20 0,11 Nm max. [1.0 in-lb max.] 21-22 13-14 0,11 Nm max. [1.0 in-lb max.] 21-22 13-14 MBB, slow action 1NC/1NO 0° 22 Silver Zb 13 0.5-14 NPT GLDC01A4J 36.5° 39° 70° min. GLDC03A4J FP 14 21 26° GLDA01A4J GLDB01A4J TT RP = 14,5° 0° 22 54° 70° min. 0,12 Nm max. [1.1 in-lb max.] BBM, slow action 21 26° Listing OP OP2 TT 26° 39° 50,5° 70° min. GLDA04A4J FP 14 OP OP2 TT Contact closed n; Contact open o. *Positive opening occurs. 1 Table 21. Side Rotary Offset Lever, Metal Roller Contacts Contact Type Contact Mtl Conduit Silver 0.5-14NPT Silver PG 13,5 Silver M20 Snap action 1NC/1NO 13 14 Zb 21 22 Oper. Torque Bar Chart1 0° 2NC 22 2Y 11 Gold plated PG 13,5 54° 70° min. 0,12 Nm max. [1.1 in-lb max.] DT = 11,5° TT 0,11 Nm max. [1.0 in-lb max.] 26° 0° GLDA01A5B GLDB01A5B GLDC01A5B RP = 14,5° Slow action 21 26° Listing 46,5° 70° min. GLDB36A5B 21-22 11-12 FP TT 12 Contact closed n; Contact open o. *Positive opening occurs. 1 Table 22. Side Rotary Conveyor Lever, Ceramic Roller Contacts Contact Type Contact Mtl Conduit Silver 0.5-14 NPT Gold plated 0.5-14 NPT Silver M20 Snap action 1NC/1NO 13 14 Zb 21 22 Oper. Torque Bar Chart1 0° 0,12 Nm max. [1.1 in-lb max.] 1NC/1NO 22 Zb 13 0.5-14 NPT 0,11 Nm max. [1.0 in-lb max.] 2NC 2Y 11 Silver 0.5-14 NPT GLDC01A9A 0,11 Nm max. [1.0 in-lb max.] 36.5° 39° 70° min. GLDA03A9A FP Slow action 22 26° GLDA01A9A GLDA07A9A 21-22 13-14 14 21 TT RP = 14,5° 0° Silver 54° 70° min. DT = 11,5° BBM, slow action 21 26° Listing 0° OP 26° OP2 TT 46,5° 70° min. GLDA06A9A 21-22 11-12 FP TT 12 Contact closed n; Contact open o. *Positive opening occurs. 1 sensing.honeywell.com 15 GLS Series MICRO SWITCH™ GLD SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 23. Side Rotary, 50 mm Rubber Roller Contacts Contact Type Contact Mtl 13 Silver 14 Zb 22 21 1NC/1NO PG 13,5 0.5-14 NPT 22 Silver Zb 13 Bar Chart1 0° 26° 0,12 Nm max. [1.1 in-lb max.] PG 13,5 14 Listing 54° 70° min. GLDA01A1Y TT DT = 11,5° M20 BBM, slow action 21 Oper. Torque 0.5-14 NPT Snap action 1NC/1NO Conduit GLDB01A1Y GLDC01A1Y RP = 14,5° 0° 0,11 Nm max. [1.0 in-lb max.] 26° 36.5° 39° 70° min. 21-22 13-14 FP OP OP2 TT GLDA03A1Y GLDB03A1Y Contact closed n; Contact open o. *Positive opening occurs. 1 Table 24. Side Rotary Adjustable, 50 mm Rubber Roller Contacts Contact Type Contact Mtl Conduit Oper. Torque Bar Chart1 0° Snap action 1NC/1NO 13 0,12 Nm max. [1.1 in-lb max.] Silver Zb Listing 54° 70° min. 0.5-14 NPT 14 GLDA01A2Y TT DT = 11,5° GLDB01A2Y PG 13,5 22 21 26° RP = 14,5° BBM, slow action 1NC/1NO 0.5-14 NPT 22 21 Silver Zb 13 PG 13,5 14 0° 0,11 Nm max. [1.0 in-lb max.] 26° 36.5° 39° 70° min. 21-22 13-14 FP OP OP2 TT GLDA03A2Y GLDB03A2Y Contact closed n; Contact open o. *Positive opening occurs. 1 Table 25. Top Pin Plunger Contacts Contact Type Snap action 1NC/1NO 13 14 Zb 22 21 Contact Mtl Conduit Silver 0.5-14 NPT Silver PG 13,5 Gold plated PG 13,5 Silver M20 Gold plated M20 BBM, slow action 1NC/1NO 22 21 Zb 13 0.5-14NPT Silver PG 13,5 14 1NC/1NO 22 Zb 13 Silver PG 13,5 2 NO 14 2X 23 Silver M20 GLDB01B OT 16 sensing.honeywell.com max. 14 N max. [3.2 lb max.] FP 17,2 mm 18 mm 24 OT GLDA03B max. 17 mm 15 mm max. 21-22 13-14 21 mm GLDB04B 18 mm 16,2 mm 17 mm 15 mm GLDC04B OT FP (max.) 23-24 13-14 21 mm GLDB03B GLDA04B OT FP 13 N max. [2.9 lb max.] GLDC07B 21-22 13-14 21 mm 16 N max. [3.6 lb max.] GLDB07B GLDC01B 18,9 mm RP Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. 1 GLDA01B 16 mm 15 mm DT = 0,9 mm Slow action 13 Listing 18 mm 16 N max. [3.6 lb max.] M20 14 Bar Chart1 21 mm 0.5-14 NPT MBB, slow action 21 Oper. Force GLDC05B OP 17 mm 15 mm MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLD SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 26. Top Roller Plunger Contacts Contact Type Snap action 1NC/1NO 13 14 Zb 22 21 BBM, slow action 1NC/1NO 22 21 Zb 13 14 Contact Mtl Conduit Silver 0.5-14 NPT Gold plated 0.5-14 NPT Silver PG 13,5 Gold plated PG 13,5 Silver M20 Silver 0.5-14 NPT Silver PG 13,5 Gold plated PG 13,5 Silver M20 Oper. Force Bar Chart1 1NC/1NO 22 Zb 13 Silver PG 13,5 OT GLDB07C 28,9 mm RP 28 31 mm 14 N max. [3.2 lb max.] GLDC01C 25 mm 27,2 21-22 13-14 27 OP GLDC03C 16 N max. [3.6 lb max.] 28 27 21 2NC 11 25 OP M20 Silver 0.5-14 NPT 22 Silver PG 13,5 2Y Gold plated PG 13,5 12 Silver M20 Slow action max. GLDB04C 13 N max. [2.9 lb max.] 13 N max. [2.9 lb max.] TT FP max. 23-24 13-14 GLDC05C 31 mm 27 mm 24 23 OT 26,2 FP 21-22 13-14 31 mm Silver 2X GLDB33C OT max. 25 mm * 2NO GLDA03C GLDB03C FP 14 14 GLDB01C max. DT = 0,9 mm Slow action 13 GLDA01C 26 mm 25 mm GLDA07C 16 N max. [3.6 lb max.] MBB, slow action 21 28 mm 31 mm Listing FP OT max. 21-22 11-12 31 mm 26,5 mm 25 mm 28 mm GLDA06C GLDB06C GLDB36C GLDC06C Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. 1 Table 27. Top Roller Lever Contact Type Contact Mtl 13 14 Silver PG 13,5 Zb 22 21 1NC/1NO 22 Zb 13 Bar Chart1 39,7 mm Silver PG 13,5 1NC/1NO 22 Zb FP 9 N max. [2.0 lb max.] 13 10 N max. [2.2 lb max.] 13 Slow action 2NC 21 22 2Y 11 12 GLDC03D OP GLDB04D 32,9 mm OP M20 8 N max. [1.8 lb max.] FP 0.5-14 NPT Silver M20 8 N max. [1.8 lb max.] TT 23-24 13-14 GLDC05D 39,7 mm 24 23 GLDA03D 34,2 mm Silver 2X 35,8 mm 34,2 mm 34,5 mm 39,7 mm 35,8 mm 14 14 OT * 21-22 13-14 Slow action 2NO OP GLDB03D 39,7 mm FP PG 13,5 GLDC01D 21-22 13-14 M20 Silver GLDB01D 37,1 mm RP MBB, slow action 21 GLDA01D TT DT = 1,3 mm 0.5-14 NPT 14 Listing 35,8 mm 10 N max. [2.2 lb max.] M20 BBM, slow action 21 Oper. Force 0.5-14 NPT Snap action 1NC/1NO Conduit FP 34,2 mm OP * Contacts OT GLDA06D 21-22 11-12 39,7 mm 35,8 mm 33,1 mm GLDC06D Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. 1 sensing.honeywell.com 17 GLS Series MICRO SWITCH™ GLD SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 28. Coil Spring Wobble, 130 mm Contacts Contact Type Contact Mtl 13 14 Zb 21 Oper. Force Bar Chart1 Listing GLDA01E7B 0.5-14 NPT Snap action 1NC/1NO Conduit Silver 22 PG 13,5 1,3 N max. [0.29 lb max.] TT GLDB01E7B GLDC01E7B M20 BBM, slow action 1NC/1NO 22 21 Zb 13 Silver 0.5-14 NPT 1,1 N max. [0.25 lb max.] GLDA03E7B OP 14 Contact closed n; Contact open o. 1 Table 29. Cat Whisker Wobble, 190 mm Contacts Contact Type Contact Mtl 13 14 Zb 21 Oper. Force Bar Chart1 Listing GLDA01K8B 0.5-14 NPT Snap action 1NC/1NO Conduit Silver 22 PG 13,5 0,9 N max. [0.19 lb max.] TT GLDB01K8B GLDC01K8B M20 BBM, slow action 1NC/1NO Zb 13 Contact closed n; Contact open o. 1 18 sensing.honeywell.com 22 21 14 Silver 0.5-14 NPT 0,7 N max. [0.16 lb max.] GLDA03K8B OP MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLD DIMENSIONAL DRAWINGS mm [in] Figure 12. GLD Side Rotary • A1, A1A, A1B, and A1Y 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 15. GLD Side Rotary • A5A and A5B 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 16. GLD Side Rotary • A9A Figure 13. GLD Side Rotary • A2, A2A, A2B, and A2Y 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 17. GLD Top Pin Plunger Figure 14. GLD Side Rotary Rod • A4J (140 mm) & A4L (200 mm) 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. sensing.honeywell.com 19 GLS Series MICRO SWITCH™ GLD DIMENSIONAL DRAWINGS mm [in] Figure 18. GLD Top Roller Plunger Figure 20. GLD Wobble • E7B 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 19. GLD Top Roller Arm Figure 21. GLD Wobble • K8A/K8B or or 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. 3,5 mm [0.14 in] for PG 13,5 and M20 conduit threads. 7,2 mm [0.28 in] for 0.5-14 NPT conduit threads. Figure 22. GLD Conduit 20 sensing.honeywell.com MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLE SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 30. Side Rotary, Plastic Roller Contacts Contact Type Contact Mtl Conduit † Oper. Torque Bar Chart1 0° 13 14 0,12 Nm max. [1.1 in-lb max.] Silver Zb DT = 11,5° GLEA01A1A TT GLEB01A1A PG 13,5 22 21 54° 70° min. 0.5-14 NPT Snap action 1NC/1NO 26° Listing RP = 14,5° Snap action 2NC/2NO 13 14 11 12 23 24 21 22 Za 0° 0.5-14 NPT 0,165 Nm max. [1.6 in-lb max.] Gold plated Za 54° 70° min. 26° GLEA32A1A TT 8° GLEB32A1A PG 13,5 18° Slow action 2NC 22 21 Zb 13 Silver PG 13,5 0,11 Nm max. [1.0 in-lb max.] 26° 0° 46,5° 70° min. 21-22 11-12 GLEB06A1A FP TT 14 Contact closed n; Contact open o. *Positive opening occurs. † 0.5-14 NPT conduit option includes adapter. 1 Table 31. Side Rotary, Metal Roller Contacts Contact Type Snap action 1NC/1NO 13 Contact Mtl Conduit † Silver 0.5-14 NPT Silver PG 13,5 14 Zb Gold plated PG 13,5 Silver M20 Bar Chart1 0° 0,12 Nm max. [1.1 in-lb max.] 13 14 11 12 23 24 21 22 Za GLEA01A1B GLEB01A1B GLEB07A1B Silver PG 13,5 GLEC01A1B 0° 54° 70° min. 26° 0,165 Nm max. [1.6 in-lb max. TT 8° GLEA24A1B GLEB24A1B Za M20 22 Zb 13 TT RP = 14,5° Silver PG 13,5 GLEC24A1B 18° MBB, slow action 1NC/1NO 54° 70° min. DT = 11,5° 0.5-14 NPT Snap action 21 26° Listing 22 21 2NC/2NO Oper. Torque 0,11 Nm max. [1.0 in-lb max.] 14 0° 26° 39° FP OP OP2 50,5° 70° min. 21-22 13-14 GLEB04A1B TT Contact closed n; Contact open o. *Positive opening occurs. † 0.5-14 NPT conduit option includes adapter. 1 sensing.honeywell.com 21 GLS Series MICRO SWITCH™ GLE SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 32. Side Rotary Adjustable, Plastic Roller Contacts Contact Type Contact Mtl Conduit † Oper. Torque Bar Chart1 0° Snap action 1NC/1NO 13 14 26° 54° 70° min. GLEA01A2A 0.5-14 NPT Silver 0,12 Nm max. [1.1 in-lb max.] Zb 22 21 Listing DT = 11,5° TT GLEB01A2A PG 13,5 RP = 14,5° 0° Snap action 2NC/2NO 13 14 11 12 23 24 21 22 Za 54° 70° min. 26° GLEA24A2A 0.5-14 NPT 0,165 Nm max. [1.6 in-lb max Silver Za TT 8° GLEC24A2A M20 18° Contact closed n; Contact open o. *Positive opening occurs. † 0.5-14 NPT conduit option includes adapter. 1 Table 33. Side Rotary Adjustable, Metal Roller Contacts Contact Type Contact Mtl Conduit † Oper. Torque 0.5-14 NPT Snap action 1NC/1NO 13 PG 13,5 Silver 14 M20 Zb Gold plated Snap action 2NC/2NO 0° 26° 0,12 Nm max. [1.1 in-lb max. Listing 54° 70° min. DT = 11,5° TT GLEA01A2B GLEB01A2B GLEC01A2B 22 21 13 Bar Chart1 14 11 12 23 24 21 22 Za PG 13,5 0° 0.5-14 NPT Silver 54° 70° min. 26° 0,165 Nm max. [1.6 in-lb max Za GLEB07A2B RP = 14,5° GLEA24A2B TT 8° GLEB24A2B PG 13,5 18° Contact closed n; Contact open o. *Positive opening occurs.† 0.5-14 NPT conduit option includes adapter. 1 Table 34. Side Rotary Adjustable, Metal Rod, A4J (140 mm Rod) Contacts Contact Type Contact Mtl 13 14 Silver PG 13,5 Zb 22 21 Oper. Torque 0,12 Nm max. [1.1 in-lb max. 13 14 11 12 23 24 21 22 Za 0.5-14 NPT 0,165 Nm max. [1.6 in-lb max. sensing.honeywell.com GLEB01A4J 54° 70° min. TT 8° Za Contact closed n; Contact open o. *Positive opening occurs.† 0.5-14 NPT conduit option includes adapter. 22 TT GLEA01A4J GLEC01A4J 26° 18° 1 Listing 54° 70° min. RP = 14,5° 0° Silver 26° DT = 11,5° M20 Snap action 2NC/2NO Bar Chart1 0° 0.5-14 NPT Snap action 1NC/1NO Conduit † GLEA24A4J MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLE SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 35. Side Rotary Offset Lever, Plastic Roller Contacts Contact Type Contact Mtl Conduit † Oper. Torque Bar Chart1 0° 13 0,12 Nm max. [1.1 in-lb max. Silver 14 Zb DT = 11,5° GLEA01A5A TT GLEB01A5A PG 13,5 22 21 54° 70° min. 0.5-14 NPT Snap action 1NC/1NO 26° Listing RP = 14,5° Contact closed n; Contact open o. *Positive opening occurs. † 0.5-14 NPT conduit option includes adapter. 1 Table 36. Side Rotary Offset Lever, Metal Roller Contacts Contact Type Contact Mtl Conduit † Oper. Torque Bar Chart1 0° 1NC/1NO 13 0,12 Nm max. [1.1 in-lb max. Silver 14 Zb 54° 70° min. DT = 11,5° GLEA01A5B TT GLEB01A5B PG 13,5 22 21 26° 0.5-14 NPT Snap action Listing RP = 14,5° BBM, slow action 1NC/1NO 22 21 Silver Zb 13 PG 13,5 0,11 Nm max. [1.0 in-lb max.] 14 13 14 11 12 23 24 21 22 26° Silver Za 0.5-14 NPT 36.5° 39° 70° min. GLEB03A5B 21-22 13-14 FP 0° Snap action 2NC/2NO 0° OP OP2 TT 54° 70° min. 26° 0,165 Nm max. [1.6 in-lb max TT 8° GLEA24A5B Za 18° Contact closed n; Contact open o. *Positive opening occurs. † 0.5-14 NPT conduit option includes adapter. 1 Table 37. Side Rotary Conveyor Lever, Ceramic Roller Contacts Contact Type Contact Mtl 13 14 Bar Chart1 0° 0,12 Nm max. [1.1 in-lb max. Silver Zb 21 Oper. Torque PG 13,5 Snap action 1NC/1NO Conduit 26° Listing 54° 70° min. DT = 11,5° GLEB01A9A TT 22 M20 RP = 14,5° GLEC01A9A Contact closed n; Contact open o. *Positive opening occurs. 1 sensing.honeywell.com 23 GLS Series MICRO SWITCH™ GLE SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 38. Top Pin Plunger Contacts Contact Type Snap action 1NC/1NO 13 Contact Mtl Silver M20 BBM, slow action Silver 22 Zb 14 Gold plated 18 mm 21 mm 16 N max. [3.6 lb max.] Listing 16 mm 15 mm OT GLEA01B GLEB01B max. DT = 0,9 mm 13 14 11 12 23 24 21 22 Za PG 13,5 GLEC01B PG 13,5 M20 PG 13,5 Silver 14 N max. [3.2 lb max.] M20 Za Gold plated max. GLEC03B 21-22 13-14 21 mm 13 N max. [2.9 lb max.] GLEB03B OT 17,2 mm FP 21 mm M20 PG 13,5 GLEB07B 18,9 mm RP 0.5-14 NPT Snap action 2NC/2NO Bar Chart1 22 Gold plated 13 PG 13,5 14 21 1NC/1NO Oper. Force 0.5-14 NPT Zb 21 Conduit † FP 18 mm 17 mm 15 mm 18 mm 16 mm 15 mm OT OP GLEA24B GLEB24B max. DT = 0,6 mm M20 GLEB33B GLEC33B GLEC24B GLEC32B RP = 18,6 mm Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. † 0.5-14 NPT conduit option includes adapter. 1 Table 39. Top Roller Plunger Contacts Contact Type Snap action 1NC/1NO 13 Contact Mtl Silver PG 13,5 14 M20 22 21 Gold plated 14 11 12 23 24 21 22 Za Silver Bar Chart1 31 mm 16 N max. [3.6 lb max.] PG 13,5 28 mm Listing 26 mm 25 mm max. GLEC01C GLEB07C 28,9 mm RP 31 mm 13 N max. [2.9 lb max.] FP 28 mm 26 mm 25 mm OT OP max. DT = 0,6 mm 24 sensing.honeywell.com GLEA24C GLEB24C Za M20 RP = 28,6 mm Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. † 0.5-14 NPT conduit option includes adapter. 1 GLEA01C GLEB01C OT DT = 0,9 mm PG 13,5 0.5-14 NPT Snap action 13 Oper.Force 0.5-14 NPT Zb 2NC/2NO Conduit † GLEC24C MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLE SERIES ORDER GUIDE/RECOMMENDED LISTINGS For listings not shown, contact your Honeywell representative. Table 40. Top Roller Lever Contact Type Contact Mtl 13 14 Silver PG 13,5 Zb 22 21 13 14 11 12 23 24 21 22 Za Bar Chart1 39,5 mm Za PG 13,5 2 NC 22 2Y 39,5 mm 0.5-14 NPT 3,2 N max. [0.72 lb max.] FP GLEA24D OT OP DT = 0,9 mm 8 N max. [1.8 lb max.] OP FP GLEB24D GLEC24D RP = 36,7 mm 21-22 11-12 GLEA06D 39,5 mm 35,8 mm 12 11 GLEC01D 35,8 mm M20 Silver GLEB01D 37,1 mm RP Slow action 21 GLEA01D DT = 1,3 mm 0.5-14 NPT Silver Listing 35,8 mm 10 N max. [2.2 lb max.] M20 Snap action 2NC/2NO Oper. Force 0.5-14 NPT Snap action 1NC/1NO Conduit † * Contacts 33,1 mm Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. † 0.5-14 NPT conduit option includes adapter. 1 Table 41. Coil Spring Wobble, 130 mm Contacts Contact Type Contact Mtl Snap action 13 1NC/1NO 14 Zb 21 2NC/2NO 11 12 23 24 21 22 Za Bar Chart1 Listing GLEA01E7B 1,3 N max. [0.29 lb max.] Silver TT GLEB01E7B PG 13,5 22 14 Oper. Force 0.5-14 NPT 0° Snap action 13 Conduit † 0.5-14 NPT Silver PG 13,5 Za 1.1 N max. 0.25 lb max.] 16 ° 35 ° GLEA24E7B 11-12 13-14 21-22 23-24 OP FP TT DT = 7° 11-12 13-14 21-22 23-24 GLEB24E7B 9 ° RP Contact closed n; Contact open o. *Positive opening occurs. NOTE: Bar chart measurements are in millimeters. † 0.5-14 NPT conduit option includes adapter. 1 Table 42. Cat Whisker Wobble, 140 mm Contacts Contact Type Contact Mtl Conduit Snap action Silver PG 13,5 13 1NC/1NO 22 13 14 11 12 23 24 21 22 Za Za Listing GLEB01K8A Gold plated TT GLEB07K8A PG 13,5 0° Snap action 2NC/2NO Bar Chart1 0,9 N max. [0.19 lb max.] 14 Zb 21 Oper. Force Silver PG 13,5 1.1 N max. 0.25 lb max.] 16 ° 35 ° 11-12 13-14 21-22 23-24 OP FP TT DT = 7° GLEB24K8A 11-12 13-14 21-22 23-24 9 ° RP Contact closed n; Contact open o. 1 sensing.honeywell.com 25 GLS Series MICRO SWITCH™ GLE DIMENSIONAL DRAWINGS mm [in] Figure 23. GLE Side Rotary • A1, A1A, A1B, and A1Y Figure 26. GLE Side Rotary • A5A and A5B Figure 24. GLE Side Rotary • A2, A2A, A2B, and A2Y Figure 27. GLE Side Rotary • A9A Figure 25. GLE Side Rotary • A4J and A4L Figure 28. GLE Top Pin Plunger 26 sensing.honeywell.com MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches MICRO SWITCH™ GLE DIMENSIONAL DRAWINGS mm [in] Figure 29. GLE Top Roller Plunger Figure 31. GLE Wobble • E7B Figure 30. GLE Top Roller Arm Figure 32. GLE Wobble • K8A Figure 33. GLE Conduit Adapter for 0.5-14 NPT sensing.honeywell.com 27 GLS Series FACTORY PRE-WIRED LIMIT SWITCHES WITH INTEGRAL CONNECTOR FACTORY PRE-WIRED LIMIT SWITCHES WITH INTEGRAL CONNECTOR Epoxy coated metal Limit Switches GLCC01B-D1: Top pin plunger, 1NC/1NO snap action, with Deutsch DT style 4 pin connector GLCC01C-D1: Top roller plunger, 1NC/1NO snap action, with Deutsch DT style 4 pin connector GLCC06A1B-D1: Side rotary with metal roller, 2NC slow action, with Deutsch DT style 4 pin connector Plastic Limit Switches GLDC01A1A-D1: Side rotary with plastic roller, 1NC/1NO snap action, with Deutsch DT style 4 pin connector GLDC01A1B-D1: Side rotary with metal roller, 1NC/1NO snap action, with Deutsch DT style 4 pin connector GLDC01C-D1: Top roller plunger, 1NC/1NO snap action, with Deutsch DT style 4 pin connector Note: Reference base catalog listing for switch characteristics. For example, cat. listing GLCC01B-D1 has base cat. listing GLCC01B. Connector Without Limit Switch GLZ8C-DEU: DT style 4 pin connector prewired with 6 in. of lead wires (4) and 20 mm conduit thread with jam nut GLZ8C-PA: DT style 4 pin connector packet with all parts furnished unassembled for a 20 mm conduit thread REPLACEMENT PARTS - BASIC SWITCHES Basic Switch Body Type 01 03 04 06 07 24 32 33 34 36 GLC GLZ301 GLZ303 GLZ304 GLZ306 GLZ307 n/a n/a GLZ333 GLZ334 GLZ336 GLD GLZ301 GLZ303 GLZ304 GLZ306 GLZ307 n/a n/a GLZ333 GLZ334 GLZ336 GLE GLZ301 GLZ303 GLZ304 GLZ306 GLZ307 GLZ324 GLZ332 GLZ333 GLZ334 GLZ336 28 sensing.honeywell.com MICRO SWITCH™ GLS Global Miniature (EN50047 Style) Limit Switches This datasheet supports the following MICRO SWITCH™ GLS Series Limit Switches GLCA01A1A GLCA01A1B GLCA01A1B-3 GLCA01A2A GLCA01A2B GLCA01A4J GLCA01A5B GLCA01A9A GLCA01B GLCA01C GLCA01C-6 GLCA01D GLCA01E7B GLCA01K8A GLCA01K8B GLCA03A1A GLCA03A1B GLCA03B GLCA03C GLCA03C-6 GLCA03D GLCA03E7B GLCA03K8B GLCA04A1B GLCA04A2B GLCA04B GLCA05A1A GLCA06A1B-4 GLCA06A5B GLCA06C-6 GLCA06E7B GLCA07A1B-3 GLCA36A5B GLCA36D GLCB01A1A GLCB01A1A/4 GLCB01A1B GLCB01A2A GLCB01A2B GLCB01A4J GLCB01A4L GLCB01A5B GLCB01A9A GLCB01B GLCB01C GLCB01D GLCB01E7B GLCB01K8A GLCB01K8B GLCB03A1B GLCB03A2A GLCB03B GLCB03C GLCB03D GLCB04A1B GLCB04B GLCB04C GLCB04D GLCB06A1B GLCB06A1B-3 GLCB06A1B-4 GLCB06A2B GLCB06B GLCB06C GLCB07A1B GLCB07A1B-3 GLCB07A2B GLCB07B GLCB07C GLCB07D GLCB07E7B GLCB33D GLCB34A1B-5 GLCB35A1B-5 GLCB36C GLCC01A1A GLCC01A1B GLCC01A2B GLCC01A4J GLCC01A9A GLCC01B GLCC01B-D1 GLCC01C GLCC01C-D1 GLCC01D GLCC01E7B GLCC03A2B GLCC06A1B-D1 GLCC06C GLCC06D GLCC07A1A GLCC07A1B GLCC07A2B GLCD03A1A GLCD03B GLDA01A1A GLDA01A1A-D GLDA01A1B GLDA01A1B-D GLDA01A1Y GLDA01A2A GLDA01A2B GLDA01A2Y GLDA01A4J GLDA01A5B GLDA01A9A GLDA01B GLDA01C GLDA01C-D GLDA01D GLDA01E7B GLDA01K8B GLDA03A1A GLDA03A1B GLDA03A1Y GLDA03A2Y GLDA03A9A GLDA03B GLDA03C GLDA03C-6 GLDA03D GLDA03E7B GLDA03K8B GLDA04A2B GLDA04A4J GLDA04B GLDA05A2B GLDA06A1B GLDA06A2A GLDA06A9A GLDA06C GLDA06D GLDA07A2B GLDA07A9A GLDA07C GLDB01A1-3 GLDB01A1A GLDB01A1B GLDB01A1B3 GLDB01A1Y GLDB01A2 GLDB01A2A GLDB01A2B GLDB01A2Y GLDB01A4J GLDB01A5B GLDB01B GLDB01C GLDB01D GLDB01D-D GLDB01E7B GLDB01K8B GLDB03A1A GLDB03A1B GLDB03A1Y GLDB03A1Y-3 GLDB03A1Y-4 GLDB03A2A GLDB03A2Y GLDB03B GLDB03C GLDB03C-6 GLDB03D GLDB04A1A GLDB04B GLDB04C GLDB04D GLDB06A1B GLDB06A2A GLDB06C GLDB07A1A GLDB07A1B GLDB07A2A GLDB07A2B GLDB07B GLDB07C GLDB33C GLDB33C-6 GLDB36A5B GLDB36C GLDB36C-6 GLDC01A1A GLDC01A1A-D1 GLDC01A1B GLDC01A1B-D1 GLDC01A1Y GLDC01A2A GLDC01A2B GLDC01A4J GLDC01A5B GLDC01A9A GLDC01B GLDC01C GLDC01C-D1 GLDC01D GLDC01E7B GLDC01K8B GLDC03A4J GLDC03C GLDC03D GLDC04B GLDC05A1A GLDC05A2A GLDC05B GLDC05C GLDC05D GLDC06A1A GLDC06A1B GLDC06C GLDC06D GLDC07A1B GLDC07B GLDD01A1B GLDD01D GLEA01A1A GLEA01A1B GLEA01A2A GLEA01A2B GLEA01A4J GLEA01A5A GLEA01A5B GLEA01B GLEA01C GLEA01D GLEA01E7B GLEA06D GLEA24A1B GLEA24A1B-C GLEA24A2A GLEA24A2B GLEA24A4J GLEA24A5B GLEA24B GLEA24C GLEA24C-6 GLEA24D GLEA24E7B GLEA32A1A GLEB01A1A GLEB01A1B GLEB01A2A GLEB01A2B GLEB01A4J GLEB01A5A GLEB01A5B GLEB01A9A GLEB01B GLEB01C GLEB01D GLEB01E7B GLEB01K8A GLEB03A5B GLEB03B GLEB04A1B GLEB06A1A GLEB07A1B GLEB07A2B GLEB07B GLEB07C GLEB07K8A GLEB24A1B GLEB24A2B GLEB24B GLEB24C GLEB24C-6 GLEB24D GLEB24E7B GLEB24K8A GLEB32A1A GLEB33B GLEC01A1B GLEC01A2B GLEC01A4J GLEC01A9A GLEC01B GLEC01C GLEC01D GLEC03B GLEC24A1B GLEC24A2A GLEC24B GLEC24C GLEC24D GLEC32B GLEC33B GLED01D GLZ301 GLZ303 GLZ304 GLZ306 GLZ307 GLZ332 GLZ333 GLZ334 GLZ336 GLZ8C-DEU GLZ8C-PA sensing.honeywell.com 29 GLS Series ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: • Product installation instructions • Aerospace range guide • Transportation range guide • Limits and Machine Safety range guide • Product application-specific information –Application Note: Sensors and Switches for Industrial Manual Process Valves –Application Note: Sensors and Switches Used in Valve Actuators and Valve Positioners –Industrial Machinery Switch Guide WARNING IF USED IN APPLICATIONS CONCERNING HUMAN SAFETY • Only use NC direct opening (“positive opening”/”positive break”) contacts, identified by the symbol . • Do NOT use flexible/adjustable actuators. Only use actuators designed for safety applications. • Do NOT defeat, tamper, remove, or bypass this switch. • Hazardous voltage, disconnect power before servicing. • Strictly adhere to all installation and maintenance instructions • Consult with local safety agencies and their requirements when designing a machine-control link, interface, and all control elements that affect safety. Failure to comply with these instructions could result in death or serious injury. –Limit and Enclosed Switches Application Information –Limit and Enclosed Switches Operating Characteristics –Limit and Enclosed Switches Reference Standards –Limit and Enclosed Switches Typical Applications –Sensors and Switches in Mobile Cranes –Sensors and Switches in Front Loaders – Sensors and Switches in Elevator Applications WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 30 sensing.honeywell.com Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell’s sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to [email protected] Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 107147-14-EN IL50 GLO July 2014 Copyright © 2014 Honeywell International Inc. All rights reserved.