Small size – Extended Life – Low cost FEATURES Filtering – Bypass – Coupling – Blocking APPLICATIONS Operating Temperature Range Capacitance Tolerance WVDC Surge voltage SVDC WVDC Dissipation Factor tan δ 6.3 7.9 6.3 10 13 10 16 20 16 25 32 25 .3 .22 .18 .14 .12 .12 2 Minutes .01CV or 3uA,Whichever is greater Leakage current Low temperature stability Impedance ratio (120 Hz) -55°C to +105°C +20% at 120 Hz, 20°C 35 50 44 63 35 50 Rated WVDC -25°C to +20°C 6.3 4 10 3 16 2 25 2 35 2 50 2 -40°C to +20°C 8 6 4 4 3 3 Load Life Shelf Life Resistance to soldering heat Ripple Current Multipliers 1000 hours at 105°C with rated WVDC and ripple current applied Capacitance change <25% of initial measured value Dissipation factor <200% of maximum specified value Leakage current >100% of maximum specified value 1000 hours at 85°C with no voltage applied Capacitance change <25% of initial measured value Dissipation factor <200% of maximum specified value Leakage current >100% of maximum specified value Capacitors placed on a 250°C hot plate for 30 seconds with their electrode terminations facing downward will fulfill the following conditions after being cooled to room temperature Capacitance change <10% of initial measured value Dissipation factor <100% of maximum specified value Leakage current >100% of maximum specified value 50 0.8 Frequency (Hz) 120 400 1k 10k 1.0 1.0 1.1 1.3 100k 1.5 105 1.0 Temperature (°C) 85 70 1.7 2.0 D L W+0.2 H+0.2 C+0.2 R LL+0.2 S+0.2 4 5 6.3 6.3 6.3 8 8 10 5.4 +0.1/-0.2 5.4 +0.1/-0.2 5.4 +0.1/-0.2 5.8 +0.1/-0.2 4.3 5.3 6.6 6.6 6.6 8.3 8.3 10 4.3 5.3 6.6 6.6 6.6 8.3 8.3 10 5.0 6.0 7.3 7.3 7.3 9.0 9.0 11.0 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 0.7~1.0 0.7~1.0 0.7~1.0 1.8 2.1 2.4 2.4 2.4 2.9 2.9 3.2 1.0 1.4 2.2 2.2 2.2 3.2 3.2 4.6 7.7 +0.1/-0.2 6.2 +0.1/-0.2 10.2+0.1/-0.2 10.2+0.1/-0.2 SMH Capacitance WVDC (µF) IC PART NUMBER +105°C, General Purpose 1000 hours Maximum Maximum RMS Ripple ESR (Ω) Current Dims DxL 120 Hz, (mA) (mm) +20°C 120 Hz, +105°C 0.1 50 104SMH050M 1989.44 2.3 4x5.4 0.22 50 224SMH050M 904.29 3.4 4x5.4 0.33 50 334SMH050M 602.86 4.1 4x5.4 0.47 50 474SMH050M 423.28 5 4x5.4 1 50 105SMH050M 198.94 10 4x5.4 2.2 50 225SMH050M 90.43 16 4x5.4 3.3 50 335SMH050M 60.286 16 4x5.4 4.7 35 475SMH035M 49.383 22 4x5.4 4.7 50 475SMH050M 42.33 23 5x5.4 10 16 106SMH016M 33.157 18 4x5.4 10 35 106SMH035M 23.21 30 5x5.4 10 50 106SMH050M 19.894 32 6.3x5.4 22 6.3 226SMH6R3M 21.1 22 4x5.4 22 16 226SMH016M 15.07 39 5x5.4 22 35 226SMH035M 10.55 38 6.3x5.4 22 50 226SMH050M 9.04 51 6.3x5.8 33 10 336SMH010M 12.06 34 5x5.4 33 16 336SMH016M 33.158 35 5x5.4 33 25 336SMH025M 8.038 65 6.3x5.4 33 35 336SMH035M 7.033 42 6.3x5.4 33 35 336SMH035MFT 23.211 84 8x6.5 33 50 336SMH050M 6.03 70 6.3x7.7 47 6.3 476SMH6R3M 9.877 46 5x5.4 47 16 476SMH016M 7.055 70 6.3x5.4 47 35 476SMH035M 4.938 80 6.3x6 47 50 476SMH050M 4.23 80 6.3x7.7 100 6.3 107SMH6R3M 4.642 71 6.3x5.4 100 16 107SMH016M 3.3157 80 6.3x5.4 100 25 107SMH025M 2.653 91 6.3x7.7 100 50 107SMH050M 1.989 230 8x10.5 150 10 157SMH010M 2.653 86 6.3x6 150 16 157SMH016M 2.21 95 6.3x7.7 220 16 227SMH016M 1.507 120 6.3x7.7 220 25 227SMH025ML10 1.2057 180 10x10.5 220 25 227SMH025MFE 1.2057 320 8x10.5 220 35 227SMH035M 1.06 190 8x10.5 220 50 227SMH050M 0.904 220 10x10.5 330 6.3 337SMH6R3M 1.407 290 6.3x7.7 330 16 337SMH016ML10 1.005 195 10x10.5 330 25 337SMH025M 0.8038 220 8x10.5 330 35 337SMH035M 0.704 300 10x10.5 470 16 477SMH016M 0.7055 340 8x10.5 470 25 477SMH025M 0.5644 490 10x10.5 10x10.5 680 16 687SMH016M 0.488 310 1000 6.3 108SMH6R3M 0.4642 230 8x10.5 1500 6.3 158SMH6R3M 0.31 310 10x10.5