Small size – Non/Bi-polar FEATURES Bypass – Coupling – Filtering APPLICATIONS Operating Temperature Range Capacitance Tolerance WVDC Surge voltage SVDC WVDC Dissipation Factor 6.3 7.9 6.3 .32 10 13 10 .26 16 20 16 .24 Rated WVDC 6.3 10 16 -25°C to +20°C 4 3 2 2 2 2 8 6 4 4 3 3 tan δ Leakage current Low temperature stability Impedance ratio (120 Hz) -40°C to +105°C +20% at 120 Hz, 20°C 25 35 50 32 44 63 25 35 50 .2 .18 .18 2 Minutes .01CV or 3uA, whichever is greater 25 35 50 -40°C to +20°C Load Life Shelf Life Resistance to soldering heat Ripple Current Multipliers 1000 hours at 105°C with rated WVDC and ripple current applied. Polarity reversed every 250 hours Capacitance change <20% of initial measured value Dissipation factor <200% of maximum specified value Leakage current >100% of maximum specified value 1000 hours at 85°C with no voltage applied Capacitance change <20% of initial measured value Dissipation factor <200% of maximum specified value Leakage current >100% of maximum specified value Capacitors placed on a 250C hot plate for 30 seconds with their electrode terminations facing downward will fulfill the following conditions after being cooled to room temperature Capacitance change <10% of initial measured value Dissipation factor <100% of maximum specified value Leakage current >100% of maximum specified value 50 0.75 Frequency (Hz) 120 400 1k 1.0 1.35 1.55 10k 2.0 105 1.0 Temperature (°C) 85 70 65 40 1.65 1.78 2.1 2.4 D+0.5 L W+0.2 H+0.2 C+0.2 R P+0.2 4 5 6.3 5.3 +0.1/-0.2 5.3 +0.1/-0.2 5.3 +0.1/-0.2 4.3 5.3 6.6 4.3 5.3 6.6 5 6 7 0.5~0.8 0.5~0.8 0.5~0.8 1.0 1.4 2.2 NCN Capacitance WVDC (µF) IC PART NUMBER +105°C, non-polar 1000 hours Maximum Maximum RMS Ripple ESR (mΩ) Current Dims DxL 120 Hz, (mA) (mm) +20°C 120 kHz, +105°C 0.1 50 104NCN050M 2984.16 1.3 4x5.3 0.22 50 224NCN050M 1356.43 2.3 4x5.3 0.33 50 334NCN050M 904.289 2.8 4x5.3 0.47 50 474NCN050M 634.927 4 4x5.3 1 50 105NCN050M 298.416 8.4 4x5.3 2.2 50 225NCN050M 135.643 13 5x5.3 2.2 35 225NCN035M 113.036 8.4 4x5.3 3.3 50 335NCN050M 90.429 17 5x5.3 4.7 50 475NCN050M 63.493 20 6.3x5.3 4.7 35 475NCN035M 52.911 18 5x5.3 4.7 16 475NCN016M 59.965 12 4x5.3 10 16 106NCN016M 28.184 23 5x5.3 10 35 106NCN035M 24.87 29 6.3x5.3 22 6.3 226NCN6R3M 18.086 28 5x5.3 22 16 226NCN016M 12.81 37 6.3x5.3 33 16 336NCN016M 8.541 49 6.3x5.3 47 6.3 476NCN6R3M 8.466 45 6.3x5.3