SMD Aluminum Electrolytic Capacitor – JCZ FEATURES Ø Extra low impedance with temperature range -55~+105℃. Ø Impedance 40~60% less than JCD series Ø Comply with the RoHS directive. SPECIFICATIONS Operating Temperature Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -55℃ ~ +105℃ 6.3V ~ 50V.DC 4.7 ~ 4700μF ±20% at 120Hz, 20℃ Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater (After 2 minutes application of rated voltage) Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater (After 1 minutes application of rated voltage) Dissipation Factor (Tan δ) Measurement Frequency: 120Hz, Temperature: 20℃ Rated Voltage (V) 6.3 10 16 Φ4~Φ10 0.22 0.19 0.16 Tan δ (Max.) Φ12.5~Φ16 0.26 0.22 0.18 Stability At Low Temp. Measurement Frequency: 120Hz Rated Voltage (V) Z(-25℃)/ Impedance Φ4~Φ10 Z(-55℃)/ Ratio ZT/Z20 Z(-25℃)/ Φ12.5~Φ16 (Max.) Z(-55℃)/ Z(20℃) Z(20℃) Z(20℃) Z(20℃) 6.3 3 5 3 10 25 0.14 0.16 10 2 4 3 8 35 0.12 0.14 50 0.12 0.12 16 2 4 2 6 25 2 3 2 4 35 2 3 2 3 50 2 3 2 3 Load Life After 3000 hours. (1000 hrs. for Ø4~ Ø6.3*5.4, 2000 hrs. for Ø 6.3*7.7& Ø 8) application of rated voltage at 105℃, they meet the characteristics listed at right. Capacitance Change Within ± 25% of initial value. Dissipation Factor 200% or less of initial specified value Leakage Current Initial specified value or less Shelf Life After leaving capacitors under no load at 105℃ for 1000 hours, they meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed at right. Capacitance Change Within ± 10% of initial value Dissipation Factor Initial specified value or less Leakage Current Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] *2 Applicable toΦ6.3*7.7 *3 Applicable toΦ8*10.5~Φ10 *4 Applicable toΦ12.5~Φ16 www.jbcapacitors.com www.jbcapacitors.hk E-mail: [email protected] Tel : (852)2790 5091 Fax: (852)8169 8283 SMD Aluminum Electrolytic Capacitor – JCZ DIMENSIONS(Unit: mm) ØD×L 4×5.8 5×5.8 6.3×5.8/7.7 8×6.2 8×10.5 10×10.5/13.5 12.5×13.5/16 16×16.5 A 2.0 2.2 2.6 3.4 3.0 3.3 4.9 5.8 B 4.3 5.3 6.6 8.4 8.4 10.4 13.0 17.0 C 4.3 5.3 6.6 8.4 8.4 10.4 13.0 17.0 E ± 0.2 1.0 1.4 1.9 2.3 3.1 4.7 4.7 6.4 L 5.8 5.8 5.8/7.7 6.2 10.5 10.5/13.5 13.5/16 16.5 DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT&IMPEDANCE WV Cap. (μF) 6.3 10 16 0J 1A 1C 10 100 4×5.4 1.8 80 15 150 4×5.4 1.8 80 22 220 33 330 47 470 56 560 68 680 100 101 4×5.4 1.8 80 150 5×5.4 0.76 150 6.3×5.4 0.44 230 (4×5.4) (1.8) (80) (5×5.4) (0.76) (150) 5×5.4 0.76 150 6.3×5.4 0.44 230 6.3×5.4 0.44 230 (4×5.4) (1.8) (80) (5×5.4) (0.76) (150) (5×5.4) (0.76) (150) 5×5.4 0.76 150 6.3×5.4 0.44 230 6.3×5.4 0.44 230 6.3×5.4 0.44 230 6.3×7.7 0.34 280 (5×5.4) (0.76) (150) 6.3×5.4 0.44 230 (6.3×5.4) (0.44) (230) (8×6.2) (0.34) (280) 6.3×5.4 0.44 230 (5×5.4) (0.76) (150) 0.44 230 6.3×7.7 0.34 280 (6.3×5.4) (0.44) (230) (8×6.2) (0.34) (280) 681 1000 102 1500 152 150 (80) (80) 221 680 0.76 (1.8) 0.76 220 471 5×5.4 (4×5.4) (1.8) 6.3×5.4 470 80 5×5.4 151 331 1.8 (4×5.4) 150 330 4×5.4 6.3×7.7 0.34 280 (8×6.2) (0.34) (280) 8×10.5 0.17 450 10×10.5 0.09 670 (8×10.5) (0.17) (450) 10×10.5 0.09 670 (8×10.5) (0.17) (450) 10×13.5 0.075 800 (10×10.5) (0.09) (670) 6.3×7.7 0.34 280 6.3×7.7 0.34 280 (6.3×5.4) (0.44) (230) (6.3×5.4) (0.44) (230) (8×6.2) (0.34) (280) (8×6.2) (0.34) (280) 6.3×7.7 0.34 280 6.3×7.7 0.34 280 6.3×7.7 0.34 280 8×10.5 0.17 450 (8×6.2) (0.34) (280) (6.3×7.7) (0.34) (280) 8×10.5 0.17 450 8×10.5 0.17 450 10×10.5 0.09 670 10×10.5 0.09 670 12.5×13.5 0.065 10×10.5 0.09 670 (8×10.5) (0.17) (450) 10×10.5 0.09 670 (8×10.5) (0.17) (450) 10×13.5 0.075 800 (10×10.5) (0.09) (670) 16×16.5 0.055 1350 (12.5×16) (0.06) (1050) (12.5×13.5) (0.065) (900) 900 16×16.5 0.055 1350 16×16.5 2200 222 12.5×13.5 0.065 900 12.5×16 0.060 1050 3300 332 12.5×16 0.060 1050 16×16.5 0.055 1350 4700 472 16×16.5 0.055 1350 Case Size ØD×L(mm) 0.055 1350 Impedance Ripple Current (Ω) at 20℃ (mA rms) at 105℃ 100kHz 100kHz www.jbcapacitors.com www.jbcapacitors.hk E-mail: [email protected] Tel : (852)2790 5091 Fax: (852)8169 8283 SMD Aluminum Electrolytic Capacitor – JCZ DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT&IMPEDANCE WV Cap. (μF) 25 35 50 1E 1V 1H 4.7 4R7 10 100 4×5.4 1.8 15 150 5×5.4 0.76 4×5.4 1.8 80 5×5.4 (4×5.4) 1.52 (3.0) 85 (60) 80 5×5.4 (4×5.4) 0.76 (1.8) 150 (80) 6.3×5.4 (5×5.4) 0.88 (1.52) 165 (85) 150 5×5.4 0.76 150 6.3×5.4 0.88 165 0.68 (0.88) (0.68) 185 (165) (185) 22 220 6.3×5.4 (5×5.4) 0.44 (0.76) 230 (150) 6.3×5.4 (5×5.4) 0.44 (0.76) 230 (150) 6.3×7.7 (6.3×5.4) (8×6.2) 33 330 6.3×5.4 (5×5.4) 0.44 (0.76) 230 (150) 6.3×5.4 (8×6.2) 0.44 (0.34) 230 (280) 6.3×7.7 (8×6.2) 0.68 (0.68) 185 (185) 47 470 6.3×7.7 (6.3×5.4) (8×6.2) 0.34 (0.44) (0.34) 280 (230) (280) 6.3×7.7 (6.3×5.4) (8×6.2) 0.34 (0.44) (0.34) 280 (230) (280) 6.3×7.7 (8×6.2) 0.68 (0.68) 185 (185) 56 560 6.3×7.7 (6.3×5.4) 0.34 (0.44) 280 (230) 6.3×7.7 0.34 280 8×10.5 (6.3x7.7) 0.34 (0.68) 350 (185) 68 680 6.3×7.7 0.34 280 6.3×7.7 0.34 280 8×10.5 0.34 350 100 101 6.3×7.7 (8×6.2) 0.34 (0.34) 280 (280) 8×10.5 0.17 450 10×10.5 (8×10.5) 0.18 (0.34) 670 (350) 10×10.5 0.18 670 Case Size ØD×L(mm) Impedance (Ω) at 20℃ 100kHz 150 8×10.5 (6.3×7.7) 151 0.17 (0.34) 450 (280) 10×10.5 0.09 670 DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT&IMPEDANCE WV Cap. (μF) 25 35 1E 1V Ripple Current (mA rms) at 105℃ 100kHz 50 1H 220 221 8×10.5 0.17 450 10×10.5 0.09 670 10×13.5 (10×10.5) 0.16 (0.18) 750 (670) 330 331 10×10.5 (8×10.5) 0.09 (0.17) 670 (450) 10×10.5 0.09 670 12.5×13.5 0.14 800 470 471 10×13.5 (10×10.5) 0.075 (0.09) 800 (670) 12.5×13.5 (10×13.5) 0.065 (0.075) 900 (800) 16×16.5 (12.5×16) 0.10 (0.12) 1150 (900) 680 681 12.5×13.5 0.065 900 12.5×16 (12×13.5) 0.060 (0.065) 1050 (900) 1000 102 16×16.5 (12.5×16) 0.055 0.060 1350 (1050) 16×16.5 0.055 1350 1500 152 16×16.5 0.055 1350 Case Size ØD×L(mm) Impedance (Ω) at 20℃ 100kHz Ripple Current (mA rms) at 105℃ 100kHz FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT 50Hz 120Hz 300Hz 1KHz 10KHz 4.7~68µF 0.35 0.50 0.64 0.83 1.00 100~1500µF 0.40 0.55 0.70 0.85 1.00 ~680µF 0.45 0.65 0.80 0.90 1.00 1000~4700µF 1.00 0.65 0.85 0.95 Please visit our website to get more update data, those data & specification are subject to change without notice. 1.00 Frequency Ø4~Ø10 Coefficient Ø12.5~Ø16 www.jbcapacitors.com www.jbcapacitors.hk E-mail: [email protected] Tel : (852)2790 5091 Fax: (852)8169 8283