SMD Aluminum Electrolytic Capacitor – JCN FEATURES Bi-polar with general temperature+85℃ Load life of 1000 hours. SPECIFICATIONS Operating Temperature Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -40℃~ +85℃ 6.3V ~ 50V 0.1 ~ 100μF ±20% at 120Hz, 20℃ Leakage current≤ 0.005CV or 10μA, whichever is greater (after 2 minutes application of rated voltage) Dissipation Factor (tan δ) Measurement frequency: 120Hz, Temperature: 20℃ Rated voltage (V) 6.3 10 16,25 Tan δ (MAX) 0.24 0.20 0.17 Stability At Low Temp. 6.3 4 8 10 3 6 16,25 2 4 35,50 2 3 Load Life After 1000 hours application of rated voltage at85℃ (the polarity needs to exchange every 250 hours), Capacitors meet the characteristics listed at right. Capacitance Change Within ± 20% of initial value. Dissipation Factor 200% or less of initial specified value Leakage Current Initial specified value or less Shelf Life After leaving capacitors under no load at 85℃ for 1000 hours, they meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed at right. Capacitance Change Within ± 10% of initial value Dissipation Factor Initial specified value or less Leakage Current Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] Measurement frequency: 120Hz Rated voltage (V) Impedance ratio Z(-25℃ )/ Z(20℃) ZT / Z20 (MAX) Z(-40℃) / Z(20℃) 35,50 0.15 *2 Applicable toΦ6.3*7.7 DIMENSIONS(Unit: mm) ØDxL A B C E±0.2 L 4x5.4 2.0 4.3 4.3 1.0 5.4 5x5.4 2.2 5.3 5.3 1.4 5.4 6.3x5.4 2.6 6.6 6.6 1.9 5.4 6.3x7.7 2.6 6.6 6.6 1.9 7.7 Please visit our website to get more update data, those data & specification are subject to change without notice. w: aitcomponents.com e: [email protected] t: +44 (0)1903 744988 SMD Aluminum Electrolytic Capacitor – JCN DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT&LMPEDANCE WV/V Cap/μF 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 0.1 0R1 -- -- -- -- -- -- -- -- -- -- 4×5.4 1.0 0.22 R22 -- -- -- -- -- -- -- -- -- -- 4×5.4 2.0 0.33 R33 -- -- -- -- -- -- -- -- -- -- 4×5.4 2.8 0.47 R47 -- -- -- -- -- -- -- -- -- -- 4×5.4 4.0 1 010 -- -- -- -- -- -- -- -- -- -- 4×5.4 8.4 2.2 2R2 -- -- -- -- -- -- -- -- 4×5.4 8.4 5×5.4 13 3.3 3R3 -- -- -- -- -- -- 5×5.4 12 5×5.4 16 5×5.4 17 4.7 4R7 -- -- -- -- 4×5.4 12 5×5.4 16 5×5.4 18 6.3×5.4 20 10 100 -- -- 4×5.4 17 5×5.4 23 6.3×5.4 27 6.3×5.4 29 6.3×7.7 36 22 220 5×5.4 28 6.3×5.4 33 6.3×5.4 37 6.3×7.7 50 6.3×7.7 54 -- -- 33 330 6.3×5.4 37 6.3×5.4 41 6.3×5.4 49 6.3×7.7 61 -- -- -- -- 47 470 6.3×5.4 45 6.3×7.7 61 6.3×7.7 75 -- -- -- -- -- -- 100 101 6.3×7.7 82 6.3×7.7 85 -- -- -- -- -- -- Case size Allowab le ripple Case Size ØD×L(mm),ripple current(mA rms) at 85℃ 120Hz Frequency coefficient of allowable ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz~ Coefficient 0.70 1.00 1.17 1.36 1.50 Please visit our website to get more update data, those data & specification are subject to change without notice. w: www.aitcomponents.com e: [email protected] t: +44 (0)1903 744988