Optoway 1 SPB-9110V-R3R5G *********************************************************************************************************************************************************************** SPB-9110V-R3R5G (RoHS Compliant) 1310 nm RX / 1550 nm RX / 3 Gb/s Medium Power 1-Fibre BIDI SM Dual Receiver ********************************************************************************************************************************************************************** DESCRIPTION FEATURES l l l l l l l l l l The SPB-9110V-R3R5G is a 1-fibre dual channel optical single mode receiver module designed to receive optical serial digital signals as defined in SMPTE 297-2006. It supports from 50 Mbps to 3 Gbps and is specifically designed for received the SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. Each receiver can receive signal from 50 Mbps to 3 Gbps with up to 30 km of single-mode fiber when using the SPB-9110V-T3T5G as the transmitter. A maximum distance of 10 km is achievable with 3Gbps pathological signals. SMPTE 297-2006 Compliant 1-Fibre BIDI Dual Receiver with Simplex LC Speed from 50 Mbps to 3Gbps Support Video Pathological Patterns for SD-SDI, HD-SDI and 3G-SDI Dual Receiver with Duplex LC Based on Industry Standard SFP Single +3.3 V Power Supply RoHS-6 Compliant 0 to 70oC Operation Hot Pluggable APPLICATIONS l SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces l High-density Video Routers ORDER INFORMATION P/No. SPB-9110V-R3R5G Type 2-RX Bit Rate (Mb/s) 50 to 3000 RX1 RX2 Package Temp (oC) RoHS Compliant 0 to -20 LC SFP 0 to 70 Yes TX2 λ Power (nm) (dBm) 1550 DFB -3 to -8 Package Temp (oC) RoHS Compliant LC SFP 0 to 70 Yes λ (nm) Sen. (dBm) λ (nm) Sen. (dBm) 1310 0 to -20 1550 RELATED PRODUCTS P/No. SPB-9110V-T3T5G Type 2-TX Bit Rate (Mb/s) 50 to 3000 TX1 λ (nm) 1310 Power (dBm) 0 to -5 LINK DISTANCE Transmitter Receiver SDI Bit Rate Max. Link Distance (km) SPB-9110V-T3T5G SPB-9110V-R3R5G 3G-SDI HD-SDI SD-SDI 2.97Gbps 1.485Gbps 270Mbos 10 21 30 ABSOLUTE MAXIMUM RATINGS *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 8/1/2009 V1.0 Optoway SPB-9110V-R3R5G 2 *********************************************************************************************************************************************************************** Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage ESD Tolerance on all pins Relative Humidity Symbol Tstg Tc Vcc Min -40 -20 0 --- 5 Recommended Operating Conditions Parameter Symbol Power Supply Voltage Vcc Operating Case Temperature Tc Baud Rate Power Supply Current Icc Min 3.13 0 50 Max 85 85 4 1 95 Units o C o C V KV HBM % RH Typ 3.3 Max 3.47 70 3000 200 150 Notes non-condensing Units / Notes V o C Mb/s mA Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V) Parameter Symbol Min Typ Max Units Notes λRX1 λRX2 1260 1480 0 0 0 0 ---29 1 1310 1550 --- 1360 1580 -18 -20 -20 -21 -23 --6 nm nm dBm dBm dBm dBm dBm dBm dB dB 1 2 Pathological PRBS 223-1, BER=1E-12 Pathological PRBS 223-1, BER=1E-12 Transition: low to high Transition: high to low 850 135 270 800 1.5 0.5 Vcc+0.3 Vcc+0.3 0.5 mVp-p ps ps ps ns V V V V Optical Received Wavelength Sensitivity for SMPTE 424M 2.97 Gb/s Sensitivity for SMPTE 292M 1.485 Gb/s Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Optical Return Loss Electrical CML Output (Differential) Sen Sen Pa Pd -----27 550 Optical Rise Time / Fall Time tr / tf Output LOS Voltage -- Low Output LOS Voltage -- High SCL, SDA V OL V OH V OH V OL 1. 2. 3. --- 660 0 2.5 2.5 0 AC coupled output 3, SMPTE 424M 3, SMPTE 292M 3, SMPTE 344M 3, SMPTE 259M IOL=-1.6mA, 1 TTL unit load IOH=40µA, 1 TTL unit load At least 30 dB optical isolation for the wavelength 1480 to 1580 nm. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm. 20% to 80%, unfiltered. MODULE DEFINITION Module Definition PIN 5 PIN 6 Interpretation by Host 4 SCL SDA Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 8/1/2009 V1.0 Optoway SPB-9110V-R3R5G 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Name Vee RX2RX2+ Vee SCL SDA Vee NC NC NC Vee RX1RX1+ Vee Vcc RX1 Vcc RX2 Vee NC NC NC Function Signal Ground Negative Differential Output (2) Positive Differential Output (2) Signal Ground Serial I2C Clock Serial I2C Data Signal Ground No Connection No Connection No Connection Signal Ground Negative Differential Output (1) Positive Differential Output (1) Signal Ground Power Supply (1) Power Supply (2) Signal Ground No Connection No Connection No Connection Notes +3.3V±5%, Internal connected *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 8/1/2009 V1.0 Optoway SPB-9110V-R3R5G 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC 1 RD Re-Clocker 2 100Ω Differential 3 RD + 4 VCC 3.3V 5 6 4. 7K 4. 7K 7 I2C CLK 8 I2C DATA 9 10 Vee NC RX2 - NC RX2 + NC Vee Vee SCL Vcc_RX2 SDA Vcc_RX1 Vee Vee NC RX1 + NC RX1 - NC Vee 20 19 18 17 16 100nF 10uF VCC 3.3V 1uH 15 1uH 14 13 100nF 10uF 100nF 10uF 12 11 RD + 100Ω Differential Re-Clocker RD - 1. Consult Chipset manufacturer’s data sheet and application data for appropriate receiver input biasing network. PACKAGE DIAGRAM (Units in mm) *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 8/1/2009 V1.0 Optoway SPB-9110V-R3R5G 5 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 Subject Initial datasheet Release Date 2009/8/1 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 8/1/2009 V1.0