Optoway 1 SPM-9100V-1RG *********************************************************************************************************************************************************************** SPM-9100V-1RG (RoHS Compliant) 850 nm / 3 Gb/s Single Optical Multi-Mode Receiver ********************************************************************************************************************************************************************** FEATURES DESCRIPTION APPLICATIONS The SPM-9100V-1RG is a single channel optical multi-mode receiver module designed to receive optical serial digital signals as defined in SMPTE 297-2006. It supports from 50 Mbps to 3 Gbps and is specifically designed for received the SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. It can receive signal from 50 Mbps to 3 Gbps with up to 1000 m of multi-mode fiber when using the SPM-9100V-1TG/2TG as the transmitter. A maximum distance of 300 m is achievable with 3Gbps pathological signals. l SMPTE 297-2006 Compliant l Speed from 50 Mbps to 3Gbps l Support Video Pathological Patterns for SD-SDI, HD-SDI and 3G-SDI l Single Receiver with Simplex LC l Based on Industry Standard SFP l Single +3.3 V Power Supply l RoHS-6 Compliant l 0 to 70oC Operation l Hot Pluggable l SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces l High-density Video Routers ORDER INFORMATION P/No. SPM-9100V-1RG Type Bit Rate (Mb/s) 1-RX 50 to 3000 RX1 λ (nm) 850 RX2 Sen. (dBm) 0 to -15 λ (nm) Package Temp (oC) RoHS Compliant LC SFP 0 to 70 Yes Package Temp (oC) RoHS Compliant LC SFP 0 to 70 Yes Sen. (dBm) RELATED PRODUCTS P/No. SPM-9100V-1TG Type 1-TX Bit Rate (Mb/s) 50 to 3000 TX1 λ (nm) 850 TX2 Power (dBm) -2 to -7 λ (nm) Power (dBm) LINK DISTANCE Transmitter SPM-9100V-1TG Receiver SDI Bit Rate Max. Link Distance (m) SPM-9100V-1RG 3G-SDI HD-SDI SD-SDI 2.97Gbps 1.485Gbps 270Mbos 300 500 1,000 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 11/1/2008 V1.0 Optoway SPM-9100V-1RG 2 *********************************************************************************************************************************************************************** ABSOLUTE MAXIMUM RATINGS Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage ESD Tolerance on all pins Relative Humidity Symbol Tstg Tc Vcc Min -40 0 0 --- 5 Recommended Operating Conditions Parameter Symbol Power Supply Voltage Vcc Operating Case Temperature Tc Baud Rate Power Supply Current Icc Min 3.13 0 50 Max 85 70 4 1 95 Units o C o C V KV HBM % RH Typ 3.3 Max 3.47 70 3000 160 120 Notes non-condensing Units / Notes V o C Mb/s mA Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Wavelength of Operation Sensitivity for SMPTE 424M 2.97 Gb/s Sensitivity for SMPTE 292M 1.485 Gb/s Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Electrical CML Output (Differential) Symbol Sen Sen Pa Pd Optical Rise Time / Fall Time tr / tf Output LOS Voltage -- Low Output LOS Voltage -- High SCL, SDA V OL V OH V OH V OL 1. Min Typ Max Units Notes 780 0 0 0 0 ---28 1 850 --- 880 -15 -15 -16 -16 -16 --6 nm dBm dBm dBm dBm dBm dBm dB Pathological PRBS 223-1, BER=1E-12 Pathological PRBS 223-1, BER=1E-12 Transition: low to high Transition: high to low 550 660 850 135 270 800 1.5 0.5 Vcc+0.3 Vcc+0.3 0.5 mVp-p ps ps ps ns V V V V 0 2.5 2.5 0 ------- AC coupled output 1, SMPTE 424M 1, SMPTE 292M 1, SMPTE 344M 1, SMPTE 259M IOL=-1.6mA, 1 TTL unit load IOH=40µA, 1 TTL unit load 20% to 80%, unfiltered. MODULE DEFINITION Module Definition PIN 5 PIN 6 Interpretation by Host 4 SCL SDA Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 11/1/2008 V1.0 Optoway SPM-9100V-1RG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Name Vee NC NC Vee SCL SDA Vee NC NC NC Vee RXRX+ Vee Vcc RX NC Vee NC NC NC Function Signal Ground No Connection No Connection Signal Ground Serial I2C Clock Serial I2C Data Signal Ground No Connection No Connection No Connection Signal Ground Negative Differential Output Positive Differential Output Signal Ground Power Supply No Connection Signal Ground No Connection No Connection No Connection Notes +3.3V±5%, Internal connected *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 11/1/2008 V1.0 Optoway SPM-9100V-1RG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC 1 2 3 4 VCC 3.3V 5 4.7K 4. 7K 6 7 I2C CLK 8 I2C DATA 9 10 Vee NC NC NC NC NC Vee Vee SCL NC SDA Vcc_RX Vee Vee NC RX + NC RX - NC Vee 20 19 18 17 16 VCC 3.3V 15 1uH 14 13 100nF 10uF 100nF 10uF 12 11 RD + 100Ω Differential Re-Clocker RD - 1. Consult Chipset manufacturer’s data sheet and application data for appropriate receiver input biasing network. PACKAGE DIAGRAM (Units in mm) Note: Since the SPM-9100V-1RG is single channel device, the receptacle for channel 2 is not used. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 11/1/2008 V1.0 Optoway SPM-9100V-1RG 5 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 Subject Initial datasheet Release Date 2008/11/1 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 11/1/2008 V1.0