Designed and Manufactured in Germany Rev.: 1 Date: 2014‐01‐16 Specification AXIOM125‐22 Oscillator type : OCXO in SMD package, Sine wave Output Parameter min. Nominal frequency Frequency stability Initial tolerance vs. temperature (steady state) operating temperature range vs. supply voltage variation vs. load change long term (aging) 1st year Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (f / VC) EFC input impedance RF output Signal waveform Load Output amplitude Harmonics Phase noise Warm‐up time Supply voltage VS Current consumption (steady state) Current consumption (warm‐up) Storage temperature range Enclosure (see drawing) (LxWxH) Weight ESD Sensitivity Handling & Processing typ. max. Unit 80.000 ± 100 +85 ± 10 ± 20 ± 0.1 MHz ppm ppb ppb °C ppb ppb ppm @+25°C, VC= 2.5V @ +40°C, after 30 days 5.0 ppm V k Ohm dBm dBc dBc/Hz min V mA mA °C ± 10 % @ 1 kHz ffinal/f0 < ±0.1 ppm @ +25°C ± 500 ‐55 ± 1 0 2.5 positive 100 Sinus 50 +7 ‐20 ‐145 4.75 5.0 ‐55 Condition 3 5.25 300 600 +105 22.7x15.1x11 max. 5 1500 AXTAL Application Notes AXAN‐011 & AXAN‐012 mm gram V HBM as IEC 61000‐4‐2 See www.axtal.com Notes: 1. Terminology and test conditions are according to IEC standard IEC60679‐1, unless otherwise stated Ordering Code: Model (Specification) AXIOM125‐22 Rev. Rev.1 Frequency [MHz] 80.000 GmbH & Co. KG AXIOM125‐22 Rev.1 Roemerring 9 Drawing D2 www.axtal.com fon: +49 (6261) 939834 D‐74821 Mosbach Germany page 1(2) fax: +49 (6261) 939836 E‐mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections Pin # 1 7 8 14 Symbol VC GND RF OUT VS Function Voltage Control (EFC) Ground RF Output Supply Voltage Environmental conditions Test MIL‐STD‐ 202G Method MIL‐STD‐ 810F Method MIL‐PRF‐ 55310D Clause Test conditions (IEC) Part ... 2‐17 5.6.2 112E 3.6.1.2 2‐20 2‐58 5.6.3 208H 210F 3.6.52 3.6.48 Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 5)°C Method 1 Test Tb Method 1A, 5s 2‐27 5.6.8 213B 516.4 3.6.40 2‐6 5.6.7.1 516.4‐4 2‐64 5.6.7.3 201A 204D 214A 5.7.1 5.7.2 108A 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 4.8.35 IEC 6006 8 Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Vibration, sinusoidal* Vibration, random* Endurance tests ‐ ageing ‐ extended aging IEC 60679‐1 Clause 514.5 Test Ea, 3 x per axes 100g, 6 ms half‐sine pulse Test Fc, 30 min per axes, 10 Hz ‐ 55 Hz 0,75mm; 55 Hz ‐ 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Revision History Rev. Drawing Date [dd.mm.yyyy] 1 1 1 ‐ D1 D2 15.01.2014 16.01.2014 20.01.2014 Remarks Author Checked First issue Typing error changed, phase noise added Package drawing changed (ground plane added) HH HH HH BN BN BN GmbH & Co. KG AXIOM125‐22 Rev.1 Roemerring 9 Drawing D2 www.axtal.com fon: +49 (6261) 939834 D‐74821 Mosbach Germany page 2(2) fax: +49 (6261) 939836 E‐mail: [email protected]