June 2013 OFF-THE-SHELF Analog, Digital & Mixed-Signal ICs, Modules, Subsystems & Instrumentation Distributed Amplifier Training Video Covers 15 to 20 GHz with 25% PAE A key trend in the microwave radio communications industry today is the constant need for improvement in amplifier efficiency. As newer ‘green’ basestations are developed, amplifiers, which offer increased RF output performance for less DC input are welcome news for designers. Hittite has launched a new power amplifier which maintains excellent performance over its operating frequency band with only moderate power dissipation. See Page 11 17 Hittite Adds New 2 Watt Power Amplifier New Featured Products! Dual Rank Track-and-Hold Amplifier The HMC6981LS6 is a four-stage GaAs pHEMT MMIC power amplifier which operates between 15 to 20 GHz. Ideal for covering the 18 GHz licensed microwave radio band, the amplifier provides 26 dB of gain, +34.5 dBm of saturated output power, and 25 % PAE from a +6V supply. With up to +43.5 dBm OIP3 the HMC6981LS6 is ideal for high linearity point-to-point and point-to-multi-point radios. (Continued on page 8) New GaAs MMIC SP4T Reflective Switch HMC1061LC5 • Direct-Coupled I/O, 4 GSPS BW • Ultra-Clean Output Waveform • 1.4 mV RMS Sample Noise See Page 4 14-Bit Analog-to-Digital Converter SP4T Reflective Switch, 23 to 30 GHz The HMC1084LC4 is a reflective Single Pole Four Throw (SP4T) switch which is ideal for demanding applications which require low insertion loss, fast switching speed, broadband performance and high power handling capability. The HMC1084LC4 GaAs MESFET SP4T switch is rated from 23 GHz to 30 GHz, and is controlled with two complementary inputs of 0/-3V. This switch exhibits fast switching speed of 15 ns (rise and fall times) and consumes much less DC current than pin diode based solutions. With an input signal at 30 GHz, the HMC1084LC4 exhibits 11 dB return loss, 26 dB isolation and only 2.8 dB insertion loss. (Continued on page 8) HMCAD1062/HMCAD1062B • 1.8V Single Supply Operation •S NR = 74 dB & SFDR = 87 dB for Fs = 125 MSPS & Fin = 105 MHz • 2 Vp-p Differential Analog Input See Page 5 25 Watt, GaN PA, 2 - 6 GHz HMC1086F10 • High Output IP3: +46 dBm • Supply Voltage: +28V @ 1.1 A • 50 Ohm Matched Input/Output See Page 6 Optical Modulator Driver Solutions 28 Gbps EML & 32 Gbps MZ Drivers Hittite has added three new products to its optical modulator driver family. The HMC1068, HMC1069 and the HMC7150LP3DE address the stringent lower power and higher density requirements of the next generation longhaul, metro core and metro access fiber optic equipment. HMC7150LP3DE is an EML (Electro-absorption Modulated Laser) driver, designed for 100G Ethernet LR4 & ER4 applications. The device supports data-rates up to 28.3 Gbps and its high bandwidth yields output signal characteristics of 12 ps rise & fall times. HMC7150LP3DE is ideal for CFP2/ CFP4 and QSFP2, or similar form factor pluggable modules, with its compact size and low power consumption. HMC7150LP3DE is available in a 3x3 mm plastic LP3 RoHS compliant SMT package and runs on a positive supply from 3.3V to 6V. (Continued on page 9) Order On-line at: www.hittite.com 2 Elizabeth Drive • Chelmsford, MA 01824 • 978-250-3343 tel • 978-250-3373 fax Hittite Exhibiting at MTT-S, Booth #230 Featuring 17 New Products & Five Product Demos. See Page 10 e nt Tes t Me & a su rem ce Spa mo adb Frequency/ Page Data Rate Number Bro Function Aut o Part Number t i ve Hittite Microwave offers over 1,095 products across 36 product lines. Our custom and standard products support a wide range of wireless / wired /optical communications and radar applications for the following markets. and C el l u I nfr l a r ast ru c Fib tur e e r & N O pt et w ic o rk Mic in g r & m owav mW e ave M il it ar y New Products by Market Application Amplifiers • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 • • • • 50 - 75 GHz 3 • • • • EML Driver 28 Gbps 1, 9 HMC1068 Optical Modulator Driver 32 Gbps 1, 9 HMC1069 Optical Modulator Driver, Pre-Stage 32 Gbps 1, 9 SP4T 23 - 30 GHz 1, 8 HMC1086 GaN MMIC PA, 25W 2 - 6 GHz 6 GaN MMIC PA, Flange-Mount 25W 2 - 6 GHz 6 GaN MMIC PA, 8W 2 - 20 GHz 6 HMC1087F10 GaN MMIC PA, Flange-Mount 8W 2 - 20 GHz 7 HMC1082LP4E Medium Power Amplifier, 0.5 Watt 6 - 18 GHz 7 Power Amplifier, 2 Watt 15 - 20 GHz 1, 8 HMCAD1062 Quad 14-Bit Data Converter 80 / 105 / 125 MSPS 5 • HMCAD1062B Dual 14-Bit Data Converter 80 / 105 / 125 MSPS 5 • HMCAD1063 Dual 14-Bit Data Converter 250 / 400 MSPS 5 • • HMCAD1073 Dual 16-Bit Data Converter 250 / 400 MSPS 5 • • HMC1061LC5 Dual Rank Track-and-Hold Amplifier 18 GHz 4 I/Q Downconverter/Receiver 27 - 34 GHz Double Balanced Mixer HMC1086F10 OFF-THE-SHELF HMC1087 HMC6981LS6 Data Converters • • I/Q Downconverter / Receivers HMC1065LP4E Mixers HMC1081 Optical Modulator Drivers HMC7150LP3DE • • • • • • Switch HMC1084LC4 2 JUNE 2013 • • • • • New I/Q Downconverter & Mixer Solutions for Microwave Radio, SATCOM & Test Instrumentation HMC1065LP4E, GaAs MMIC I/Q Downconverter, 27 to 34 GHz •Conversion Gain: 13 dB 25 20 15 10 5 0 27 •Image Rejection: 17 dBc •Input IP3: +2 dBm •24 Lead 4x4 mm SMT Package Applications •Point-to-Point and Point-to-Multi-Point Radio •Satellite Communications •Sensors 28 29 30 31 32 33 34 RF FREQUENCY (GHz) Housed in a compact, leadless RoHS +25 C +85 C -40 C compliant SMT package, the HMC1065LP4E is a GaAs MMIC image reject low noise converter which delivers small signal conversion gain of 13 dB with 17 dBc of image rejection. The HMC1065LP4E utilizes an RF low noise amplifier to drive the I/Q mixer where the LCO is driven by a x2 multiplier. IF1 and IF2 mixer outputs are provided and an external 90° hybrid is needed to select the required sideband. The HMC1065LP4E GaAs MMIC I/Q downconverter also features a very low noise figure of less than 3 dB and typical input IP3 of 2 dBm. The key specifications of the HMC1065LP4E are shown in the table below with the recently released HMC6147ALC5A I/Q downconverter, which covers the 38 GHz and 42 GHz microwave radio bands. The I/Q mixer design topology used for the HMC1065LP4E and the HMC6147ALC5A is highly advantageous because it reduces the need for filtering of the unwanted sidebands. Both devices provide much smaller alternatives to hybrid style single sideband converter assemblies, and they eliminate the need for wire bonding by allowing the use of surface mount manufacturing techniques. RF / LO Frequency (GHz) Function IF Frequency (GHz) Converstion Gain (dB) 27 - 34 I/Q Downconverter/Receiver DC - 4 12 37 - 44 I/Q Downconverter 0-4 13 Noise Figure (dB) Image Rejection (dBc) IIP3 (dBm) - 17 2 LP4 HMC1065LP4E 3.5 25 2 LC5A HMC6147ALC5A Package Part Number OFF-THE-SHELF Features Conversion Gain vs. Temperature, USB CONVERSION GAIN (dB) Microwave designers are always looking for ways to reduce space and cost and to find highly integrated solutions to simplify transmit and receive functions wherever practicable. Now Hittite has launched another new downconverter product which does just this. The HMC1065LP4E is a GaAs MMIC I/Q downconverter which is ideal for replacing the front end receiver section of 28 GHz and 32 GHz microwave radio designs. HMC1081, GaAs MMIC Mixer, 50 to 75 GHz •Passive: No DC Bias Required •Low LO Power: 12 dBm •High LO/RF Isolation: 28 dB •Wide IF Bandwidth: DC to 26 GHz Conversion Gain vs. Temperature LO = 75 GHz, LSB 0 -2 CONVERSION GAIN (dB) Features The HMC1081 is a double balanced mixer. It can be used as an upconverter or a downconverter, with DC to 26 GHz at the IF port and 50 to 75 GHz at the LO and RF port. This passive MMIC mixer is fabricated with GaAs Schottky Diode technology. All bond pads and the die backside are Ti/Au metalized. All data is measured with the chip in a 50 Ohm environment and contacted with Wirebonds. -4 -6 -8 -10 -12 -14 50 55 60 65 70 75 RF FREQUENCY (GHz) +25 C +85 C -55 C •Upconversion & Downconversion Applications JUNE 2013 3 New T/H Amplifier for Synthesizer & Signal Acquisition Applications HMC1061LC5, Dual Rank Track-and-Hold Amplifier, 18 GHz Bandwidth Enhances Bandwidth & Linearity of A/D Converters Features •68 dB SFDR (4 GHz / 0.5 Vp-p Input) •56 dB SFDR (4 GHz / 1 Vp-p Input) •Direct-Coupled I/O •Ultra-Clean Output Waveform •1.4 mV RMS Sample Noise OFF-THE-SHELF Sampling Transfer Function Applications •RT ATE Application •Digital Sampling Oscilloscopes •RF Demodulation Systems •Digital Receiver System •High Speed Peak Detectors •Software Defined Radio •Sensors & Wideband Communications Systems 1 0 -1 MAGNITUDE(dB) The HMC1061LC5 is a SiGe monolithic, fully differential, dual rank, Track-and-Hold (T/H) amplifier that provides unprecedented bandwidth and dynamic-range performance to wideband sampled signal systems. The T/H amplifier offers precision signal sampling over 18 GHz bandwidth, with 9 - 10-bit linearity from DC to beyond 5 GHz input frequency, 1.5 mV noise, and <70 fs random aperture jitter. The device can be clocked to 4 GSPS with minimal dynamic range loss. The T/H amplifier can be used to expand the bandwidth and/or high-frequency linearity of high-speed A/D conversion and signal acquisition systems. -2 3rd Order Polynomial Fit -3 -4 -5 Sampling Transfer Function -6 -7 -8 -9 0 4000 8000 12000 16000 20000 FREQUENCY(MHz) The HMC1061LC5 ultra-wideband dual rank T/H amplifier is optimized for use in microwave data conversion applications requiring maximum sampling bandwidth, high linearity over a very wide bandwidth, and low noise. A key application of this device is front end sampling for high speed A/D converters to enhance their input bandwidth and/or high frequency linearity. Although several high speed A/D converters offer enhanced sample rates, few of them offer input bandwidth beyond a few GHz. In addition, maintenance of good sampling linearity at frequencies beyond the UHF band is technologically challenging and most A/D converters suffer rapidly degraded linearity above 1 or 2 GHz signal frequency. The HMC1061LC5 can address these limitations with its 18 GHz input bandwidth and excellent broadband linearity. Once sampling takes place within the T/H amplifier, the low bandwidth held output waveform can be processed by an A/D with substantially reduced bandwidth. In addition, A/D converter linearity performance limitations at high input frequencies are also mitigated because the settled waveform is processed with the optimal baseband linearity of the A/D converter. A Selection of Track-and-Hold Amplifiers 4 Input Frequency (GHz) Function Single Tone THD/SFDR (dB) Max Clock Rate (GS/s) Ouput Noise (mV RMS) Hold Mode Feed through Rejection (dB) Package Part Number 0.02 - 4.5 Track-and-Hold -66 / 67 3 0.95 >60 LC4B HMC660LC4B DC - 18 Track-and-Hold -65 / 67 4 1.05 >60 LC4B HMC661LC4B DC - 5 Track-and-Hold -65 / 67 4 0.86 >60 LC4B HMC760LC4B DC - 18 Track-and-Hold -66 / 68 4 1.45 >65 LC5 HMC1061LC5 JUNE 2013 New Data Converters for Communications High Speed/Frequency Test Equipment HMCAD1063, HMCAD1073 Dual Channel Analog-to-Digital Converters, 250 & 400 MSPS The HMCAD1063 and HMCAD1073 are dual 14-Bit & 16-Bit wideband Analog-toDigital Converters (ADC), which achieve excellent linearity performance at high IF frequencies. •14-Bit: 85 dB SFDR & 72 dB SNR at Fin = 125 MHz, FS = 400 MSPS •16-Bit: 90 dB SFDR & 76 dB SNR at Fin = 125 MHz, FS = 400 MSPS •Dynamic Power Scaling vs. Sample Rate Applications •Communications Testing •Diversity Radio & Smart Antenna Systems •Spectrum Analyzer •High Speed Data Acquisition 75 SNR (dBFS) 70 The HMCAD1063 and the HMCAD1073 are based on a proprietary structure, and employ internal reference circuitry, a serial control interface, and parallel LVDS output data. A data synchronization clock is supplied for data capture at the receiver. Internal digital fine gain can be set separately for the ADC channels to calibrate for gain errors. 65 60 55 50 45 40 100 200 300 400 500 600 SAMPLING RATE (MSPS) HMCAD1063 and HMCAD1073 provide two data processing configurations. In Direct Mode, there is one LVDS pair assigned to each output bit. In Multiplexed Mode, a multiplexer is inserted for each ADC output bit and the LVDS interface. This configuration reduces the number of active LVDS pairs, as each LVDS pair will handle an output bit from both channel 0 and channel 1. Fast Amplitude Detect (FAD), 2 and 4-Bit outputs provide the amplitude of the input signal at very low latency. Sample Rate Function / Mode Resolution (bits) # of Power Channels Dissipation [2][3] 400 MSPS Dual Channel 14 1 490 mW / Channel 400 MSPS Dual Channel 16 2 1100 mW / Channel SNR (dBFS) SFDR (dBc) Part Number 72 85 HMCAD1063 76 90 HMCAD1073 HMCAD1062/HMCAD1062B, 14-Bit Analog-to-Digital Converters, 80/105/125 MSPS 4 or 2-Channel, High Performance, Low Power ADC Performance vs. Fin OFF-THE-SHELF Features Signal-to-Noise vs. Sampling Rate for Fin = 30 MHz @ -1 dBFS 80 90 PERFORMANCE (dB) The HMCAD1062/HMCAD1062B is a high85 performance Analog-to-Digital Converter 80 (ADC), that can sample at rates up to 125 MSPS with very low power 75 consumption. The device is supplied a very 70 small, 7x7 mm 48-pin QFN package 65 owing to the serialized data outputs. 60 The device also includes a full crosspoint 0 50 100 150 200 250 300 switch at the analog inputs which allows for INPUT FREQUENCY (MHz) great system design and configuration SNR (dBFS) SFDR (dBc) SNDR (dBFS) HD2/3 (dBc) flexibility. At the clock input a low-jitter, programmable divider is available to help simplify the user’s system clock architecture. The HMCAD1062 is the 4-channel version, while the HMCAD1062B offers two channels. Features •1.8V Single Supply Operation •SNR = 74 dB & SFDR = 87 dB for Fs = 125 MSPS & Fin = 105 MHz •2 Vp-p Differential Analog Input Applications •Communications •Signal Analyzers •High End Ultrasound •Communications Testing Sample Rate Function / Mode Resolution (bits) # of Channels Power Dissipation SNR (dBFS) SFDR (dBc) Part Number 80 / 105 / 125 MSPS Quad Channel 14 4 490 / 605 / 740 mW 74 87 HMCAD1062 80 / 105 / 125 MSPS Dual Channel 14 2 300 / 380 / 455 mW 74 87 HMCAD1062B JUNE 2013 5 New GaN MMIC Power Amplifiers for General Communications, Test Instrumentation & Radar HMC1086, 25 Watt GaN MMIC Power Amplifier, 2 to 6 GHz Features •High Output IP3: +48 dBm •High Psat: +44.5 dBm •Power Gain at Psat: 14 dB •Small Signal Gain: 22 dB •Supply Voltage: +28V @ 1.1 A The HMC1086 is a 25 W Gallium Nitride (GaN) power amplifier MMIC which operates between 2 and 6 GHz. This amplifier typically provides 22 dB of small signal gain, +44.5 dBm of saturated output power, and +48 dBm output IP3 at +33 dBm output power per tone. The HMC1086 draws 1100 mA quiescent curent from a +28V DC supply. The RF I/Os are DC blocked and matched to 50 Ohms for ease of integration into Multi-Chip-Modules (MCM). All electrical performance data was acquired with die eutectically attached to 1.02 mm (40 mil) thick CuMo carrier with multiple 1.0 mil diameter ball bonds connecting the die to 50 Ohms transmission lines on alumina. P3dB vs. Frequency 50 P3dB (dBm) 45 40 35 30 25 2 3 4 5 6 FREQUENCY (GHz) 25dBm Input Power Psat HMC1086F10, 25 Watt GaN Flange Mount MMIC Power Amplifier, 2 to 6 GHz Features •High Psat: +44.5 dBm •Power Gain at Psat: 11 dB The HMC1086F10 is a 25 W Gallium Nitride (GaN) MMIC Power Amplifier which operates between 2 and 6 GHz, and is provided in a 10-lead flange mount package. The amplifier typically provides 23 dB of small signal gain, +44.5 dBm saturated output power, and delivers +46 dBm output IP3 at +33 dBm output power per tone. The amplifier draws 1100 mA quiescent current from a +28V DC supply. The RF I/Os are DC blocked and matched to 50 Ohms for ease of use. Psat vs. Temperature 50 45 Psat (dBm) OFF-THE-SHELF •50 Ohm Matched Input/Output 40 35 30 2 3 4 5 6 FREQUENCY (GHz) •High Output IP3: +46 dBm +25 C •Small Signal Gain: 23 dB +85 C -40 C •50 Ohm Matched Input/Output HMC1087, 8 Watt GaN MMIC Power Amplifier, 2 to 20 GHz Features •High Psat: +39 dBm •Power Gain at Psat: 5.5 dB •High Output IP3: +45 dBm •Small Signal Gain: 11 dB •Supply Voltage: +28V @ 850 mA •50 Ohm Matched Input/Output 6 JUNE 2013 P3dB vs. Frequency 45 40 P3dB (dBm) The HMC1087 is an 8 W Gallium Nitride (GaN) MMIC power amplifier which operates between 2 and 20 GHz. This amplifier typically provides 11 dB of small signal gain, +39 dBm of saturated output power, and +45 dBm output IP3 at +29 dBm output power per tone. The HMC1087 draws 850 mA quiescent current from a +28V DC supply. The RF I/Os are matched to 50 Ohms for ease of integration into MultiChip-Modules (MCMs). All electrical performance data was acquired with the die eutectically attached to 1.02 mm (40 mil) thick CuMo carrier with multiple 1.0 mil diameter ball bonds connecting the die to 50 Ohm transmission lines on alumina. 35 30 25 2 4 6 8 10 12 14 16 FREQUENCY (GHz) P3dB Psat 18 Versatile Driver Amplifier for Microwave Radio & VSAT HMC1087F10, 8 Watt GaN Flange Mount MMIC Power Amplifier, 2 to 20 GHz Features •High Psat: +38.5 dBm •Power Gain at Psat: 6.5 dB •High Output IP3: +43.5 dBm The HMC1087F10 is an 8 W Gallium Nitride (GaN) MMIC power amplifier which operates between 2 and 20 GHz, and is provided in a 10-lead flange mount package. This amplifier typically provides 11 dB of small signal gain, +39 dBm of saturated output power, and +43.5 dBm output IP3 at +28 dBm output power per tone. The amplifier draws 850 mA quiescent current from a +28V DC supply. The RF I/Os are matched to 50 Ohms for ease of use. Gain & Return Loss 20 Response (dB) 10 0 -10 -20 -30 -40 1.5 3 4.5 6 7.5 9 10.5 12 13.5 15 16.5 18 19.5 21 22.5 FREQUENCY (GHz) S21 S11 S22 HMC1082LP4E, 0.5 Watt Power Amplifier with Power Detector, 5.5 to 18 GHz The HMC1082LP4E is a GaAs pHEMT MMIC driver amplifier with an integrated temperature compensated on-chip power detector which operates between 5.5 and 18 GHz. Housed in a leadless 4x4 mm ceramic surface mount package, the amplifier provides up to 22 dB of gain, +35 dBm Output IP3, and +24.5 dBm of output power at 1 dB gaincompression, while requiring 220 mA from a +5V supply. The HMC1082LP4E is capable of supplying up to +26.5 dBm of saturated output power (Psat) with 27 % PAE. •Gain: 22 dB •P1dB: +24.5 dBm •Saturated Power: +26.5 dBm @ 27% PAE 24 22 20 18 5 7 9 11 13 15 17 19 FREQUENCY (GHz) +25 C +85 C -40 C The HMC1082LP4E is an ideal driver amplifier for microwave radio applications from 5.5 to 18 GHz. The amplifier may also be used for 13.75 to 14.5 GHz Ku Band VSAT transmitters, or as an LO driver for many of Hittite’s high performance mixers. The amplifier’s I/Os are DC blocked and matched to 50 Ohms with no external matching required. •Integrated Power Detector Applications •Microwave Radio & VSAT •Sensors & Surveillance The HMC1082LP4E complements Hittite’s full range of medium power amplifiers, which cover all of the licensed microwave radio bands from 6 to 42 GHz. A selection of Hittite’s medium power amplifiers is shown in the table below. •LO Driver for Frequency Conversion Frequency (GHz) 26 Psat (dBm) Features Psat vs. Temperature 28 OFF-THE-SHELF •50 Ohm Matched Input/Output Function Gain (dB) OIP3 (dBm) NF (dB) P1dB (dBm) Bias Supply Package Part Number 5 - 20 Medium Power Amplifier 19 30 7 19 +5V @ 114 mA LC3 HMC451LC3 6 - 18 Medium Power Amplifier, 0.5 Watt 22 +35 - 25 +5V @ 220 mA LP4 HMC1082LP4E 6.5 - 13.5 Medium Power Amplifier 14 29 4.5 18 +5V @ 95 mA LP3 HMC441LP3 12 - 16 Medium Power Amplifier LNA 23 34 2.5 25 +5V @ 200 mA LP5 HMC490LP5E HMC757LP4E 16 - 24 Power Amplifier, 0.5 Watt 20.5 34.5 - 26.5 +5V @ 400 mA LP4 21 - 32 Medium Power Amplifier 17 34 5 23 +5V @ 200 mA LC4 HMC499LC4 22 - 26.5 Power Amplifier, 0.5 Watt 21.5 33 7 26.5 +6V @ 350 mA LP4 HMC863LP4E 28 - 36 Low Noise 21 24 2.8 12 +3V @ 82 mA LP4 HMC566LP4E 34 - 46.5 Medium Power Amplifier 22 34 - 24 +6V @ 250 mA Chip HMC1016 JUNE 2013 7 New PA & SP4T Switch for Microwave Radio, SATCOM, Test Equipment & Sensors Hittite Adds New GaAs pHEMT MMIC 2 Watt Power Amplifier (continued from page 1) •High P1dB +33.5 dBm •High Psat +34.5 dBm •High Gain: 26 dB •50 Ohm Matched Input/Output •16 Lead 6x6 mm SMT Package The HMC6981LS6 is housed in a ceramic RoHS compliant 6x6 mm QFN leadless air cavity package which exhibits low thermal resistance and is compatible with surface mount manufacturing techniques. The RF I/Os are internally matched to 50 Ohms. 46 Output IP3 vs. Temperature, Pout/tone = +20 dBm 44 42 IP3 (dBm) Features The HMC6981LS6 complements Hittite’s extensive line of power amplifiers which provide frequency coverage for all of the licensed microwave radio bands from 6 to 42 GHz. (See table below). 40 38 36 34 32 30 15 16 17 18 19 20 FREQUENCY (GHz) Frequency (GHz) Function OIP3 (dBm) NF (dB) 6 - 9.5 Power Amplifier, 2 Watt 9-14 Power Amplifier, 2 Watt w/Power Detector 18 41 - 33 +7V @ 1340 mA LP5 HMC591LP5 33 43 - 34 +6V @ 1400 mA LP5G HMC952LP5GE 12 - 16 Power Amplifier, 3 Watt w/Power Detector 27 41 - 34.5 +7V @ 1200 mA LP5G HMC995LP5GE 12.5 - 15.5 Power Amplifier, 2 Watt 15 - 20 Power Amplifier, 2 Watt 27 40 - 32 +6V @ 1200 mA LP5 HMC965LP5E 26 +43.5 - 33.5 +6V @ 1100 mA LS6 16 - 24 Power Amplifier, 1/2 Watt HMC6981LS6 21 41 - 34 +5V @ 400 mA LP4 HMC757LP4E 24 - 31.5 Power Amplifier, 1.5 Watt 21 41 - 34 +5.5V @ 1200 mA LP5 HMC943LP5E 34 - 46.5 Medium Power Amplifier 22 34 - 24 +6V @ 250 mA Chip HMC1016 P1dB (dBm) Bias Supply Part Number Package New GaAs MMIC SP4T Reflective Switch (continued from page 1) Housed in a leadless 4x4 mm SMT package, and compatible with surface mount manufacturing techniques, this compact switch is best used in microwave radio, SATCOM and sensor applications. Features •Broadband: 23 - 30 GHz •High Isolation: 26 dB •High Power Handling: >+27 dBm Additionally, the HMC1084LC4 switch is capable of handling high power levels in excess of +27 dBm, which make it ideal for a wide range of applications including telecom infrastructure, sensors, antenna arrays and test instrumentation. Applications •Telecom Infrastructure •Microwave Radio •Test Instrumentation Frequency (GHz) Insertion Loss RFin to RF1 vs. Temperature 0 -1 -2 -3 -4 -5 -6 23 24 26 +25 C Function Insertion Loss (dB) Isolation (dBm) DC - 20 SP4T 2.3 45 22 18 - 40 SPD, PIN MMIC, 2W 1.4 40 34 23 - 30 SP4T 2.8 35 25 0 / -3 23 - 30 SP4T 2.8 30 - 55 - 86 SPDT, PIN MMIC 2 30 - JUNE 2013 Input P1dB (dBm) 25 27 28 29 30 FREQUENCY (GHz) The HMC1084LC4 complements Hittite’s extensive line of single, double and multithrow MMIC switches with frequency coverage from DC to 86 GHz. •SATCOM and Sensors 8 Gain (dB) INSERTION LOSS (dB) OFF-THE-SHELF +25 C +85 C -40 C Control Input (Vdc) +85 C -40 C Package Part Number 0 / -5V LP4 HMC641LP4E -10 / +1.5 (30 mA) Chip HMC971 LC4 HMC944LC4 0 / -3 LC4 HMC1084LC4 -5 / +5 Chip HMC-SDD12 Optical Modulator Driver Solutions Optical Modulator Driver Solutions (continued from page 1) The wide supply operating range enables designers to lower the power consumption of their modules by selecting the optimum supply voltage based on their EML characteristics. The device has 50 Ohm matched inputs/outputs and must be used in AC-coupled configuration. The optimum bias condition is set with external bias voltages. The output signal cross-point and amplitude are adjustable via device control pins. HMC7150LP3DE Power Dissipation vs. Output Swing Over Supply 0.5 POWER DISSIPATION (W) 0.45 The HMC1068 and HMC1069 are optical modulator drivers in die form and are ideal for driver integrated transmitter optical sub-assembly modules for 100G systems. Both devices support data rates up to 32 Gbps with excellent time domain performance and the small size and low power consumption enables designers to meet their power budgets in highly integrated designs. HMC1068 can deliver up to 3 Vp-p output voltage swing without the need for an external bias-tee and is ideal for Electro-Absorption (EA) type modulators. HMC1069 can deliver higher voltage up to 8 Vp-p output swings and is optimized to meet the electrical characteristics of the Mach-Zender (MZ) type optical modulators. 0.4 0.35 0.3 0.25 0.2 0.15 0.1 0.05 0 1 1.2 1.4 1.6 1.8 2 2.2 OUTPUT SWING (V ) pp +5.0V +6.0V The HMC1069 is biased though an external bias-tee at its RF output. Both drivers provide around 14 to 15 dB gain and depending on the application, can be used as single stage or in cascade configuration for higher gain. The HMC1068 and HMC1069 support wide supply voltage range, which gives designers the advantage and the flexibility to optimize and lower the power consumption of their system for different optical modulators. These devices have 50 Ohm matched inputs/outputs and must be used AC-coupled. The peak-detector feature is incorporated in all three devices which can be used for monitoring the output voltage swing level during normal operation. As fiber-optic systems migrate toward smaller form factors, more highly integrated building blocks will be needed. The HMC1068 and the HMC1069 die products address the next generation optical modulator designs where the drivers are integrated in the same module assembly with the optical modulator. 32 Gbps NRZ Output Eye Diagram @ 6V Supply HMC1068 & HMC1069 in Cascade Configuration MZ Modulator Driver Application. VDD PRBS 231_1 Generator 500 mV Vin HMC1068 OFF-THE-SHELF +3.3V +4.0V Out HMC1069 Vdd = 6V, Idd = 158 mA (Under RF Drive) Vout: 7.45 Vp-p Vctl = 0.80V Data Rate Max. (Gbps) Function Gain (dB) Group Variation Delay (ps) Additive Jitter (ps) Output Voltage Level (Vp-p) Package Part Number 28.3 EML Driver 11 ±7 0.27 2.2 LP3D HMC7150LP3DE 32 Optical Modulator Driver 15 ±5 0.3 3 Chip HMC1068 32 Optical Modulator Driver, Pre-Stage 15 ±5 0.3 7.5 Chip HMC1069 JUNE 2013 9 Hittite to Feature 17 New Products at MTT-S 2013 Washington State Convention Center, June 4 - 6, 2013 Hittite will feature 17 new products at the 2013 IEEE MTT-S International Microwave Symposium (IMS 2013) and Exhibition held at the Washington State Convention Center, Seattle, Washington, June 4-6, 2013. During the exhibition, these and other Hittite Microwave products will be on display. A live product demonstration area will showcase some of the company’s latest products in our corporate exhibit booth #230. Products to be showcased in the live product demonstration area include: Wideband PLL with Integrated VCO The HMC832LP6GE is a 3.3V wideband fractional-N PLL with integrated VCO that generates continuous fractional frequencies between 25 MHz and 3 GHz. The HMC832LP6GE offers low power consumption of 560 mW while featuring industry leading phase noise and spurious performance. It is the ultimate choice for designers looking for a single, superior performance, multi-application device that can cover a wide frequency range. Industry leading spurious performance simplifies radio design and enables radio designers to achieve maximum performance. OFF-THE-SHELF Wideband Transceiver Hittite’s high performance 3 GHz Direct Conversion Receiver, EKIT01-HMC6383, combines new wideband components and techniques to achieve excellent system level performance: 700 to 3000 MHz RF Input, Programmable IF Bandwidth of 7 to 100 MHz and programmable accuracy of ± 2.5 %. This unique radio design platform also provides wideband input frequency coverage from 700 MHz to 3000 MHz with 90 dB of distributed programmable gain, and high linearity in excess of 60 dBm input IP2. The integrated, seamless, image rejection calibration algorithm achieves 80 dB of image rejection. Signal Generator Family Hittite’s powerful signal generators are designed to support the exploding market for communication and sensor equipment operating between 10 MHz and millimeterwave frequencies. With output frequencies up to 70 GHz, these signal generators exhibit phase noise as low as -99 dBc/Hz, spurious output to -70 dBc, and up to +28 dBm of output power. On display will be the HMC-T2220, HMC-T2220B and HMC-T2240 synthesized signal generators. Wideband Direct Quadrature Modulator with Power Detector The HMC1197LP7FE is a new direct quadrature modulator with integrated Fractional-N PLL/VCO RFIC which is ideal for transmit applications in wireless infrastructure equipment such as base transceiver stations, remote radio units, small cells and repeaters from 100 to 4000 MHz. The HMC1197LP7FE’s wideband operation, excellent noise and linearity performance makes it suitable for a wide range of transmission standards, including single and multicarrier CDMA, UMTS, CDMA2000, GSM/EDGE, W-CDMA, TD-SCDMA, and WiMAX/LTE applications. The HMC1197LP7FE incorporates a feature-rich, industry leading PLL and wideband VCO. The HMC1197LP7FE offers an easy-to-use, complete direct conversion solution thereby reducing cost, area, and power consumption. The HMC1197LP7FE will be demonstrated with Hittite’s new True-RMS Power Detector with integrated envelope detector & peak hold RFIC ideal for RF transmit or receive applications requiring repeatable measurement of average signal power along with instantaneous measurement of wave shape to accurately determine crest factor of a modulated signal. 10 JUNE 2013 Follow Hittite New Video & Social Media from Hittite Training Video: Distributed Amplifier Biasing & Optimization Hittite’s distributed amplifiers are some of the best in the industry. Hittite offers over 40 high performance distributed amplifier products which span the frequency range from DC to 65 GHz with a wide range of output power levels. Available in chip, leadless plastic, ceramic SMT packages and connectorized module formats, these amplifiers are ideal for test and measurement equipment or for wideband commercial, scientific and military transmitter and receiver systems. They are also excellent as LO drivers for many of Hittite’s mixer products. Hittite’s distributed amplifier product line also includes some very unique distributed LNAs. To understand all of the factors associated with biasing these amplifiers, Hittite has developed a training video. The video explains key considerations and techniques required to correctly bias and optimize Hittite’s distributed amplifiers for maximum performance over their intended operating frequency ranges. Topics covered include: drain biasing, biasing vg2, AC Ground capacitors, RF input/ output broadband blocks, and recommended biasing sequence. Follow Hittite on the Social Web! Hittite customers can now connect through Twitter, Google+, LinkedIn, and YouTube. Receive Hittite’s latest news including product announcements, product training videos, technical information, literature and live trade show updates. Twitter Follow @HittiteMWCorp on Twitter and receive the latest updates on new products, company news, and live feeds from events & trade shows. Linkedin Be the first to learn about HMC career opportunities and company updates. Also see exciting product announcements and upcoming trade shows. OFF-THE-SHELF The video also features a live bench demonstration which examines the effects of removing various types of “AC Ground” capacitors from an ideally biased HMC797, DC-22 GHz wideband power amplifier. To access the video, please go to the Hittite website at www.hittite.com and click on the Wideband (Distributed) Amplifier tab. The video is linked to each wideband (distributed) amplifier by clicking on the “product application video” link. Google+ Add Hittite Microwave to your circle and read product announcements, technical information and in-depth articles. YouTube Hittites’ product training videos and trade show demos gives you firsthand knowledge on our latest products. Gain engineering expertise on a wide breadth of product lines. JUNE 2013 11 June 2013 Connecting Our World Through Integrated Solutions Hittite Microwave Worldwide Sales Offices Corporate Headquarters Hittite Microwave Corporation USA Corporate Headquarters Phone: 978-250-3343 Fax: 978-250-3373 [email protected] Hittite Microwave International Limited International Headquarters Phone: +353-21-240-7996 Fax: +353-21-240-7997 [email protected] Americas Northeast Boston, MA Phone: 978-270-3167 [email protected] Northwest San Jose, CA Phone: 978-518-1792 [email protected] Denmark, Finland, Norway & Sweden Hittite Microwave Nordic AB Phone: +46-761-763969 [email protected] Europe, Middle East & Africa Finland Office Phone: +358(0)45-320-2626 [email protected] United Kingdom, Spain & Portugal Hittite Microwave Europe Limited Phone: +44-7811-267418 Fax: +353-21-240-7997 [email protected] Ireland, Greece & Turkey Hittite Microwave International Limited Phone: +353-21-240-7996 Fax: +353-21-240-7997 [email protected] Benelux Hittite Microwave Deutschland GmbH Phone: +49-8031-97654 Fax: +49-8031-98883 [email protected] Southeast Washington D.C. Phone: 312-485-8730 [email protected] Central Dallas, TX Phone: 817-727-7146 [email protected] France & Italy Hittite Microwave Sarl Phone: +33-6-0716-8079 Fax: +353-21-240-7997 [email protected] Southwest Los Angeles, CA Phone: 626-961-5602 [email protected] Central & Eastern Europe Hittite Microwave Deutschland GmbH Phone: +49-8031-97654 Fax: +49-8031-98883 [email protected] Asia & Pacific Australia & New Zealand Hittite Microwave International Limited Phone: +353-21-240-7996 Fax: +353-21-240-7997 [email protected] India Hittite Microwave India Pvt. Ltd. Phone: +91-40-44311254 Fax: +91-40-44311100 [email protected] Korea Hittite Microwave Asia Co., Limited Phone: +82-2559-0638 Fax: +82-2559-0639 [email protected] China Hittite Microwave Co., Limited Shanghai Office Phone: +86-21-6209-8809 Fax: +86-21-6209-6730 [email protected] Shenzhen Office Phone: +86-755-3322-2116 Fax: +86-755-3322-2117 [email protected] Beijing Office Phone: +86-10-6485 9219 Fax: +86-10-6485 0377 [email protected] Xi’an Office Phone: +86-29-8885-7651 Fax: +86-29-8450-3797 [email protected] Japan Hittite KK Phone: +81-3-5652-5772 Fax: +81-3-5652-6694 [email protected] Sales Representatives Americas Northeast Eastern Canada: Repwave Ottawa, Quebec & Maritimes: +1-613-270-9811 Toronto & Southern Ontario: +1-647-883-7360 New England: Microwave Marketing Specialist 978-392-0110 Western NY: Zimmerman Sales 585-381-3186 E. CT, Metro NYC, LI & No. NJ: Comp Tech 973-832-4545 Southeast DC, MD, VA & WV: Vincent Pirro Electronics 410-961-3663 Delaware, Metro PA & So. NJ: Omega Electronic Sales, Inc. 215-244-4000 IN, KY, MI, OH & W. PA: Schillinger Associates, Inc. 765-457-7241 IL & E. WI: TEQ Sales 847-742-3767 AL, FL, GA, MS, NC, SC & TN: Precision Marketing Inc. 954-752-1700 Central IA: Essig & Associates 319-363-8703 AK, KS, LA, W. MO, OK, TX: Quad State Sales & Marketing 972-669-8567 MN, ND, SD & W. WI: Matrix Design Technology 952-400-1070 CO, ID, MT, UT & WY: Innovation Sales 303-652-3030 Southwest Argentina & Brazil: Vermont Rep. Com. Ltd +55-11-3726-6655 Mexico: Quad State Sales and Marketing 972-669-8567 AZ & NM: Saguaro Technical Sales, Inc. 480-947-3724 So. CA: Acetec 858-784-0900 HI, So. NV: Hittite Southwest 626-961-5602 Northwest Western Canada: BC, AB, SK & MB: Repwave +1-604-929-8541 No. CA & NV: Custom & Wireless Sales 408-371-0222 OR & WA: Sea-Port Technical Sales 425-702-8300 Europe, Mid-East & Africa United Kingdom & Ireland: Germany, Austria, Poland, Switzerland: Firefly Technology Ltd. +44-1256-884980 MEV Elektronik Service GmbH +49-5424-2340-28 Israel: Starlight Technologies, Inc. Czech Republic, Estonia, Hungary, +972-3-9410555 Latvia, Lithuania, Slovakia: Hittite Microwave Deutschland GmbH Italy: Special-Ind SPA +49-8031-97654 +39-02-6074741 Estonia, Latvia, Lithuania: Norway: Hittite Microwave Nordic AB Bredengen AS +46-761-763969 +47-2100-9100 Belgium, Luxemburg: Russia: Nijkerk Electronics N.V. Radiant-Elcom Ltd. +32-3-544-70-66 +7-495-725-0404 Bosnia Herzegovina, Bulgaria, Croatia, Spain & Portugal: Macedonia, Romania, Serbia Altaix Electronica S.A.L Montenegro & Slovenia: +34-91-636-39-39 IC Electronika +386(0)-1-568-01-18 South Africa: RF Design CC +27-21-555-8400 Denmark: Acte A/S +45-46-900-400 Turkey: EMPA Electronics +90-212-465-71-99 Netherlands: Nijkerk Electronics B.V. +31-20-504-14-24 India: Syratron Technologies +91-802-5591107/5591031 Indonesia, Malaysia, Philippines, Singapore & Thailand: MEDs Technologies, Pte., Ltd. +65-6453-8313 Japan: Daito Electron Co., Ltd +81-3-3237-1471 Hakuto Co., Ltd (FO & HSL) +81-3-3355-7652 Korea: EZ Hightech +82-31-382-6500 JS Commtech +82-2-574-6100 Makus +82-2-3490-9526 Taiwan R.O.C.: Bandtek International Co., Ltd. +886-2-2657-2615 Gateway Tech. Co., Ltd. +886-2-8751-4918 Asia & South Pacific Sweden: RF Partner AB +46(0)-31-47-51-00 Australia & New Zealand: Braemac (SA) Pty Ltd. +61-(0)2-9550-6600 Distributors Finland: LKC OY +358-400-460-646 China & Hong Kong: Alignment Co., Ltd. +86-755-8253-7068 France: Gateway Tech Co., Ltd. L-TEQ Microwave +0755-8608-1010 +33-1-3007-7780 Secom Telecom Co., Ltd. +86-755-2515-5888 Greece: Hittite Microwave International Limited Wai Tat Electronics Ltd. +852-2799-7393 +353-21-240-7996 Instrumentation Sales Representatives North America Europe AZ, CO, ID, MO, NM, UT & WY: Technologies West RMS 602-312-3789 Belgium, Luxembourg & Netherlands: AR Benelux B.V. +31-172-423-000 CA & NV: Tritek Solutions 949-609-0560 Finland, Lithuania, Latvia & Estonia: Caltest Oy +358-(09)-530-607-0 OR & WA: Tritek Northwest 949-609-0560 Greece: Vector Technologies, LTD +30-210-68-58-008 Asia Spain: AFC Ingenieros, S.A. +34-91-365-44-05 China: WAT-COM Technologies +86-755-86233486 Turkey: Spark Olcum Teknolojileri Ltd. Sti +90-312-466-8212 Taiwan R.O.C.: T&E Communication +886-2-82211259 United Kingdom: MCS Test Equipment LTD +8453-62-63-65 Japan: Farad +81-3-5261-3091 Italy: Giakova srl +39-023-3512100 © 2013, Hittite Microwave Corporation, All Rights Reserved. 2 Elizabeth Drive • Chelmsford, MA 01824 • 978-250-3343 tel • 978-250-3373 fax Boston • Cork • Hyderabad • London • Munich • Paris • Seoul • Shanghai • Stockholm • Tokyo Receive the latest product releases at www.hittite.com - click on “My Subscription” Ref.# NL-0613 Visit Us: www.hittite.com Contact Us: [email protected]