FR301G DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS FR307G TECHNICAL SPECIFICATIONS OF FAST RECOVERY GLASS PASSIVATED RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 3.0 Amperes FEATURES * * * * High reliability Low leakage Low forward voltage drop High current capability DO-27 * High switching capability * Glass passivated junction MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 1.18 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL FR301G FR302G FR303G FR304G FR305G FR306G FR307G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 55 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 3.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage T A = 25 oC VDC IO 3.0 Amps I FSM 125 Amps VF 1.3 Volts 5.0 uAmps IR Maximum Full Load Reverse Current Average, Full Cycle .375*(9.5mm) lead length at T L = 55oC Maximum Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) CJ 50 T J , T STG -65 to + 150 Operating and Storage Temperature Range NOTES : 1. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts Volts 100 150 uAmps 250 500 nSec pF 0 C RATING AND CHARACTERISTIC CURVES ( FR301G THRU FR307G ) DC COMPONENTS CO., LTD. R