LOW JITTER PIN CONFIGURABLE DUAL CMOS OUTPUT ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATOR ASEMDC Pb Moisture Sensitivity Level – MSL 1 RoHS/RoHS II compliant 3.2 x 2.5 x 0.85 mm | | | | | | | | | | | | | | APPLICATIONS: FEATURES: • Consumer Electronics • Storage Area Networks • SATA, SAS, Fibre Channel • Passive Optical Networks • EPON, 10G-EPON, GPON, 10G-PON • Ethernet • 1G, 10GBASE-T/KR/LR/SR, and FCoE • PCI Express • Ultra Miniature Pure Silicon Clock Oscillator • Pin Configurable Dual CMOS output • Low Jitter (Period Jitter RMS 3ps typical) • Low Integrated Phase Jitter 2ps max • Excellent Shock & Vibration Immunity TM Low Jitter Pin Configurable Dual CMOS Output 3G MEMS STANDARD SPECIFICATIONS: Pre-programmed Output Frequency Configuration Freq Select Bits [FS2, FS1, FS0] – Default is [111] Freq (MHz) 000 001 010 011 100 101 110 111 Frequency Configuration 1 fOUT1 27 25 50 54 48 24 24 24 fOUT2 24 125 125 27 24 50 54 27 Frequency Configuration 2 fOUT1 106.25 100 125 100 156.25 156.25 125 156.25 fOUT2 25 100 50 50 25 125 25 156.25 Custom Configuration fOUT1 Ordering Info Contact Abracon for customized configurations fOUT2 Frequency select bits [FS2, FS1, FS0] are weakly tied high so if left floated, the default setting will be [111] and the device will output the associated frequency highlighted in Bold. If other frequency combinations are required, please contact Abracon for customized configuration. Please see the configurable frequency range in the section 2.0 Key Electrical Specifications Parameters Parameters Configurable frequency range Operating Temperature Storage Temperature Overall Frequency Stability*1 Supply Voltage (Vdd) Startup Time Enable Time Disable Time Disable Current Tri-state Function (Standby/Disable) Aging Supply Current (Idd) Output Logic Level Rise Time Fall Time Duty Cycle VOH VOL Tr Tf Minimum Minimum Typical Typical Maximum Maximum 10 ----- 170 10 ----100 -20 ----+70 -55 ----+150 -50 ----+50 +2.25 ----+3.6 --------5 --------20 --------5 ----21 23 "1" (VIH≥0.75*Vdd) or Open: Oscillation "0" (VIL<0.25*Vdd) : Hi Z -5.0 ----+5.0 --------32 0.9*Vdd ------------0.1*Vdd ----1.1 2.0 ----1.4 2.0 45 ----55 Units Units MHz °C °C ppm V ms ns ns mA V ppm mA Notes Notes Commercial, Industrial temp range Automotive temp range See options See options 40kΩ pull-up resistor embedded First year CL=15pF, 125MHz V I=±6mA ns ns % CL=15pF 20% to 80% *1. Frequency stability includes frequency variations due to initial tolerance, temp. and power supply voltage . ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.05.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | LOW JITTER PIN CONFIGURABLE DUAL CMOS OUTPUT ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATOR ASEMDC Pb RoHS/RoHS II compliant 3.2 x 2.5 x 0.85 mm | | | | | | | | | | | | | | APPLICATIONS: Key Electrical Specifications (continued) Parameters Period Jitter RMS (JPER) Minimum ----- Typical 3.0 Maximum ----- ----- 0.30 2 ----- 0.38 2 ----- 1.70 2 Integrated Phase Jitter (JPH) PHASE JITTER 25MHz-CMOS Phase Jitter (ps RMS) Item 106MHz-CMOS 1.5 125MHz-CMOS 1.0 0.5 0.0 400 600 800 Minimum Supply Voltage Input Voltage Junction Temp. Storage Temp. Soldering Temp. ESD HBM MM CDM 50MHz-CMOS 2.0 200 ps Notes F01=F02= 125MHz 200kHz ~ 20MHz, 125MHz 100kHz ~ 20MHz, 125MHz 12kHz ~ 20MHz, 125MHz ABSOLUTE MAXIMUM RATINGS: 2.5 0 Units ps -0.3 -0.3 -----55 ----- Maximum Unit +4.0 Vdd+0.3 +150 +150 +260 V V °C °C °C V 4,000 200 1,500 Condition 40sec max 1000 Low-end of integration BW: x kHz to 20 MHz OPTIONS AND PART IDENTIFICATION: (left blank if standard) ASEMDC Frequency Combination (See table below) 1: Cfg. 1 2: Cfg. 2 Frequency Combination Configuration 1 Configuration 2 Custom Configuration Operating Temp. Blank: -20°C ~ +70°C L: -40°C ~ +85°C X: -40°C ~ +105°C Z: -55°C ~ +125°C 000 fOUT1 27 fOUT2 24 fOUT1 106.25 fOUT2 25 fOUT2 - - Packaging Blank: Tube (110pcs / Tube) T: Tape & Reel(1kpcs / reel) T3: Tape & Reel(3kpcs / reel) T5: Tape & Reel(5kpcs / reel) Overall Freq. Stability Blank: ±50ppm R: ±25 ppm Freq Select Bits [FS2, FS1, FS0] – Default is [111] Freq (MHz) fOUT1 - 001 010 011 100 101 110 111 25 50 54 48 24 24 24 125 125 27 24 50 54 27 100 125 100 156.25 156.25 125 156.25 100 50 50 25 125 25 156.25 Contact Abracon for customized configurations Default condition: Frequency select bits [FS2, FS1, FS0] are all left floated. FS2, FS1, FS0 are pulled high [111] Frequency combination and default frequency is customized upon request. Please contact Abracon for the frequency combinations. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.05.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | LOW JITTER PIN CONFIGURABLE DUAL CMOS OUTPUT ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATOR ASEMDC Pb RoHS/RoHS II compliant ASEMDC 3.2 x 2.5 x 0.85 mm | | | | | | | | | | | | | | CONFIGURABLE OUTPUT STRENGTH (Tr/Tf) Output (Tr/Tf) are configurable by the control pins OxS1 and OxS0. The combinations are described in the table below. (O1S1 and O1S0 are for output 1. O2S1 and O2S0 are for output 2) OutputDrive DriveStrength StrengthBits Bits Output [O1S1,O1S0], O1S0],[O2S1, [O2S1,O2S0] O2S0]- -Default Default[11] [11] [O1S1, 00 1.6 2.4 Tr (ns) Tf (ns) 01 1.4 2.2 10 1.2 1.5 11 1.1 1.4 MECHANICAL DIMENSIONS Center pad: NC/GND Recommended Land Pattern ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Pin No. Pin Name Pin Type 1 Enable I 2 NC NA 3 O2S0 I 4 GND Power 5 FS0 I Least significant bit for frequency selection 6 FS1 I Middle bit for frequency selection Description Enables outputs when high and disables (tri-state) them when low Leave unconnected or grounded Least significant bit for output drive strength selection for Output 2 Ground 7 FS2 I Most significant bit for frequency selection 8 Fout1 O CMOS output 1 9 O1S0 I Least significant bit for output drive strength selection for output 1 10 O1S1 I Most significant bit for output drive strength selection for output 1 CMOS output 2 11 Fout2 O 12 VDD2 Power 13 VDD Power 14 O2S1 I Power Supply for Output 2 Power Supply Most significant bit for output drive strength selection for output 2 Dimensions: mm (inches) Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.05.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | LOW JITTER PIN CONFIGURABLE DUAL CMOS OUTPUT ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATOR ASEMDC Pb RoHS/RoHS II compliant 3.2 x 2.5 x 0.85 mm | | | | | | | | | | | | | | REFLOW PROFILE APPLICATIONS: TAPE & REEL: D T= 1,000pcs/reel (D=180mm) T3= 3,000pcs/reel (D=180mm) T5= 5,000pcs/reel (D=330mm) Tube: 110 pcs/tube Unit orientation in tube: Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.05.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com |