Low Jitter Pin Configurable HCSL-CMOS Dual Output Ultra Miniature Pure SiliconTM SMD Clock Oscillators ASEMDHCC Pb RoHS/RoHS II compliant ASEMDHCCC 3.2 x 2.5 x 0.85 mm Moisture Sensitivity Level (MSL) = Level 1 APPLICATIONS: FEATURES: • Consumer Electronics • Storage Area Networks • SATA, SAS, Fibre Channel • Passive Optical Networks • EPON, 10G-EPON, GPON, 10G-PON • Ethernet • 1G, 10GBASE-T/KR/LR/SR, and FCoE • PCI Express • Ultra Miniature Pure Silicon Clock Oscillator • Pin Configurable LVPECL-CMOS Dual output • Low Jitter (Period Jitter RMS 3ps typical) • Low Integrated Phase Jitter 2ps max • Excellent Shock & Vibration Immunity TM | | | | | | | | | | | | | | Low LowJitter Jitter Pin Configurable MEMS LVPECL Dual Output Technology! 3G MEMS STANDARD SPECIFICATIONS: Pre-programmed Output Frequency Configuration Ordering Info Freq (MHz) Frequency Configuration 1 Freq Select Bits [FS2, FS1, FS0] – Default is [111] 000 001 010 011 100 101 110 111 fOUT1 (HCSL) 50 156.25 200 200 125 125 100 100 fOUT2 (CMOS) 25 25 50 25 50 25 50 25 Custom Configuration fOUT1 fOUT2 Contact Abracon for customized configurations Frequency select bits [FS2, FS1, FS0] are weakly tied high so if left floated, the default setting will be [111] and the device will output the associated frequency highlighted in Bold. If other frequency combinations are required, please contact Abracon for customized configuration. Please see the configurable frequency range in the section 2.0 Key Electrical Specifications Parameters HCSL Configurable frequency range CMOS Operating Temperature Storage Temperature Overall Frequency Stability*1 Supply Voltage (Vdd) Startup Time Enable Time Disable Time Disable Current Tri-state Function (Standby/Disable) Aging Supply Current (Idd) Minimum 10 10 -20 -55 -50 +2.25 Typical Maximum 460 170 +70 +150 +50 +3.6 5 20 5 21 23 "1" (VIH≥0.75*Vdd) or Open: Oscillation "0" (VIL<0.25*Vdd) : Hi Z -5.0 +5.0 49 Units MHz °C °C ppm V ms ns ns mA V ppm mA Notes Commercial, Industrial temp range See options See options @25°C 40kΩ pull-up resistor embedded First year @25°C HCSL output: RL=50Ω, F01=125MHz CMOS output: CL=15pF, F02=75MHz *1. Frequency stability includes frequency variations due to initial tolerance, temp. and power supply voltage . ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.03.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | Low Jitter Pin Configurable HCSL-CMOS Dual Output Ultra Miniature Pure SiliconTM SMD Clock Oscillators ASEMDHCC Pb RoHS/RoHS II compliant HCSL Output (Fout1) Parameters VOH VOL Output Logic Level Peak to Peak Output Swing Rise Time Fall Time Duty Cycle Period Jitter RMS (JPER) Tr Tf Minimum 0.725 VOH VOL Tr Tf Output Logic Level Rise Time Fall Time Duty Cycle Period Jitter RMS (JPER) Maximum 0.1 750 200 200 48 400 400 52 2 .5 Integrated Phase Jitter (JPH) CMOS Output (Fout2) Parameters Typical Minimum 0.9*Vdd 45 0.25 2 0.37 2 1.70 2 Typical Maximum 1.1 1.3 0.1*Vdd 2.0 2.0 55 3 .0 Integrated Phase Jitter (JPH) 0.30 2 0.38 2 1.70 2 Unites V mV ps ps % ps ps ASEMDHCCC 3.2 x 2.5 x 0.85 mm | | | | | | | | | | | | | | Notes RL=50 Ω Single-Ended RL=50 Ω, CL=2pF (to GND); 20%/80% Differential F01= 100MHz 200kHz ~ 20MHz, @156.25MHz 100kHz ~ 20MHz, @156.25MHz 12kHz ~ 20MHz, @156.25MHz Unites Notes V I=±6mA ns CL=15pF 20%/80% % ps ps F01= 125MHz 200kHz ~ 20MHz, @125MHz 100kHz ~ 20MHz, @125MHz 12kiHz ~ 20MHz, @125MHz PHASE JITTER 2.5 106MHz-HCSL 156MHz-HCSL 1.5 212MHz-HCSL 1.0 0.5 0.0 25MHz-CMOS 50MHz-CMOS 2.0 Phase Jitter (ps RMS) Phase Jitter (ps RMS) 2.0 106MHz-CMOS 1.5 125MHz-CMOS 1.0 0.5 0.0 0 200 400 600 800 Low-end of integration BW: x kHz to 20 MHz HCSL . 2.5 50MHz-HCSL ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED 1000 0 200 400 600 800 1000 Low-end of integration BW: x kHz to 20 MHz CMOS Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.03.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | Low Jitter Pin Configurable HCSL-CMOS Dual Output Ultra Miniature Pure SiliconTM SMD Clock Oscillators ASEMDHCC Pb RoHS/RoHS II compliant ASEMDHCC 3.2 x 2.5 x 0.85 mm | | | | | | | | | | | | | | ABSOLUTE MAXIMUM RATINGS Item Minimum Supply Voltage Input Voltage Junction Temp. Storage Temp. Soldering Temp. ESD HBM MM CDM Maximum -0.3 -0.3 Unit +4.0 Vdd+0.3 +150 +150 +260 -55 V V °C °C °C V 4,000 400 1,500 Condition 40sec max OPTIONS AND PART IDENTIFICATION: (left blank if standard) ASEMDHCC - - - Packaging Blank*: Tube (110pcs / Tube) T: Tape & Reel (1kpcs / reel) T3: Tape & Reel (3kpcs / reel) T5: Tape & Reel (5kpcs / reel) * Due to the immediate availability of stock and the qty of the order, the parts may be delivered as BULK: Cut Tape, Loose parts in Antistatic Bag or in Tube(s). The MOQ per the series will still apply for Tube packaging. Operating Temp. Blank: -20°C ~ +70°C L: -40°C ~ +85°C Frequency Combination Standard Configuration Custom Configuration Freq (MHz) Overall Freq. Stability Blank: ±50ppm R: ±25 ppm Freq Select Bits [FS2, FS1, FS0] – Default is [111] 000 001 010 011 100 101 110 111 fOUT1 (HCSL) 50 156.25 200 200 125 125 100 100 fOUT2 (CMOS) 25 25 50 25 50 25 50 25 fOUT1 Contact Abracon for customized configurations fOUT2 Default condition: Frequency select bits [FS2, FS1, FS0] are all left floated. FS2, FS1, FS0 are pulled high [111] Frequency combination and default frequency is customized upon request. Please contact Abracon for the frequency combinations. Configurable CMOS Output Strength (Tr/Tf) CMOS Output (Tr/Tf) is configurable by the control pins OS2, OS1 and OS0. The combinations are described in the table below. Output Drive Strength Bits [OS2, OS1, OS0] - Default [111] ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED 000 001 010 011 100 101 110 111 Tr (ns) 2.1 1.7 1.6 1.4 1.3 1.3 1.2 1.1 Tf (ns) 2.5 2.4 2.4 2 1.8 1.6 1.3 1.3 Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.03.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | Low Jitter Pin Configurable HCSL-CMOS Dual Output Ultra Miniature Pure SiliconTM SMD Clock Oscillators ASEMDHCC Pb RoHS/RoHS II compliant ASEMDHCCC 3.2 x 2.5 x 0.85 mm | | | | | | | | | | | | | | MECHANICAL DIMENSIONS Center Pad: NC/GND Recommended Land Pattern Pin No. Pin Name Pin Type Description 1 Enable NC OS0 GND FS0 FS1 FS2 Output1+ Output1OS1 Output 2 VDD2 VDD OS2 I NA I Power I I I O O I O Power Power I Enables outputs when high and disables (tri-state) them when low Leave unconnected or grounded Least significant bit for output drive strength selection for CMOS Ground Least significant bit for frequency selection Middle bit for frequency selection Most significant bit for frequency selection Positive HCSL Output 1 Negative HCSL Output 1 Middle bit for output drive strength selection for CMOS CMOS output Power Supply 2 for CMOS Output Power Supply Most significant bit for output drive strength selection for CMOS 2 3 4 5 6 7 8 9 10 11 12 13 14 Dimensions: mm (inches) ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.03.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | Low Jitter Pin Configurable HCSL-CMOS Dual Output Ultra Miniature Pure SiliconTM SMD Clock Oscillators ASEMDHCC Pb RoHS/RoHS II compliant REFLOW PROFILE ASEMDHCC 3.2 x 2.5 x 0.85 mm | | | | | | | | | | | | | | APPLICATIONS: Ramp-Up Rate (200°C to Peak Temp) Preheat Time 150°C to 200°C Time maintained above 217°C Peak Temperature Time within 5°C of actual Peak Ramp-Down Rate Time 25°C to Peak Temperature 3°C/Sec Max. 60-180 Sec 60-150 Sec 255-260°C 20-40 Sec 6°C/Sec Max. 8 min Max. REFLOW PROFILE D T= 1,000pcs/reel (D=180mm) T3= 3,000pcs/reel (D=180mm) T5= 5,000pcs/reel (D=330mm) Tube: 110 pcs/tube Unit orientation in tube: Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.03.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com |