TIGHT STABILITY INDUSTRIAL GRADE CRYSTAL OSCILLATOR ASFLT SERIES ESD Sensitive Pb RoHS/RoHS II Compliant 5.0 x 3.2 x 1.05mm | | | | | | | | | | | | | | | Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: APPLICATIONS: • Highly reliable seam-sealed package • Low current consumption • Low phase noise and jitter • Industrial grade tight temperature stability (±5.0ppm / -40 to +85°C) • Fast start-up time • CMOS output with Tri-state function • Home networking by AC socket • Wireless LAN • Mobile communications • PLC modem • WiMax STANDARD SPECIFICATIONS: Parameters Frequency Range Standard Frequencies Operating Temperature Storage Temperature Overall Frequency Stability* Supply Voltage (Vdd) Supply Current (Idd) Stand-by Current Symmetry Rise and Fall Time (Tr/Tf) Output Load Output Voltage (VOH) Output Voltage (VOL) Start-up Time RMS Jitter Tri-state function (Stand-by) Phase Noise Aging@+25°C Minimum Typical Maximum 4 54 5, 10, 12, 16, 16.384, 19.44, 20, 24, 26, 32, 40, 44 -40 +85 -40 +85 -15 +15 +2.7 3.0 +3.3 7.0 10 45 55 5.0 15 0.9* Vdd 0.1* Vdd 0.2 3.0 3.0 Pin #1: “1”( VIH≥ 0.7*Vdd) or Open: Oscillation Pin #1: “0” ( VIL<0.3*Vdd): (Hi-Z) -143 -2 +2 -7 +7 Units MHz MHz °C °C ppm V mA uA % ns pF V V ms ps dBc/Hz ppm Notes See options See options @ 1/2Vdd 10%Vdd-90%Vdd CMOS @10kHz offset First year 10 years OPTIONS AND PART IDENTIFICATION: (Left blank if standard) ASFLT Supply Voltage Blank: 3.0±10% A: 2.7±10% B: 3.3±10% C: 2.8±10% D: 2.5±10% ABRACON ABRACON IS IS ISO9001:2008 CERTIFIED CE RTIFIED - Frequency in MHz Please specify the frequency in MHz. e.g. 16.384MHz MHz - - Overall Freq. Stability Blank: ±15ppm Y: ±10ppm R7*: ±7ppm R5*: ±5ppm Packaging Blank: Bulk T: Tape & Reel *Contact Abracon for availability Visit www.abracon.com for Terms & Conditions of Sale Revised: 06.18.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com TIGHT STABILITY INDUSTRIAL GRADE CRYSTAL OSCILLATOR ASFLT SERIES ESD Sensitive Pb RoHS/RoHS II Compliant 5.0 x 3.2 x 1.05mm | | | | | | | | | | | | | | | OUTLINE DRAWING: Resist layer is required on the path for the by-pass capacitor. Note : It is recommended to use an approximately 0.01uF bypass capacitor between PIN 2 and 4. Dimensions: Inches (mm) TAPE & REEL: (1,000 pcs/reel) PIN 1 2 3 FUNCTION CE GND Output 4 VDD REFLOW PROFILE: Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON ABRACON IS IS ISO9001:2008 CERTIFIED RTIFIED CERTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 06.18.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com