TIGHT STABILITY INDUSTRIAL GRADE CRYSTAL OSCILLATOR ASET SERIES ESD Sensitive Pb RoHS/RoHS II compliant 3.2 x 2.5 x 1.2mm Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: APPLICATIONS: • Highly reliable seam-sealed package • Low current consumption 7mA • Low phase noise and jitter • Industrial grade tight temperature stability available (±10ppm / -40 to +85°C) • Fast start-up time 0.2ms typical • CMOS output with Tri-state function • Home networking by AC socket • Wireless LAN • Mobile communications • PLC modem • WiMax STANDARD SPECIFICATIONS: Parameters Frequency Range Standard Frequencies Operating Temperature Storage Temperature Overall Frequency Stability* Supply Voltage (Vdd) Supply Current (Idd) Stand-by Current Symmetry Rise and Fall Time (Tr/Tf) Output Load Output Voltage (VOH) Output Voltage (VOL) Start-up Time RMS Jitter Tri-state function Phase Noise (@10kHz offset) Aging@+25°C Minimum Typical Maximum 4 54 5, 10, 12, 16, 20, 24, 26, 27, 32, 40, 44 -40 +85 -40 +85 -15 +15 +2.7 3.0 +3.3 7 .0 10 45 55 5.0 15 0.9* Vdd 0.1* Vdd 0.2 3.0 3 .0 "1" (VIH≥0.7*Vdd) or Open: Oscillation "0" (VIH<0.3*Vdd) : Hi Z -143 -2 +2 -7 +7 Units M Hz MHz °C °C ppm V mA uA % ns pF V V ms ps Notes See options See options @ 1/2Vdd 10%Vdd-90%Vdd CMOS dBc/Hz ppm First year 10 years * Overall frequency stability includes initial tolerance @ +25˚ C, and temperature stability OPTIONS AND PART IDENTIFICATION: (Left blank if standard) ASET- - Supply Voltage Blank: 3.0±10% A: 2.7±10% B: 3.3±10% C: 2.8±10% D: 2.5±10% ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CE RTIFIED MHz - Frequency in MHz Please specify the frequency in MHz. e.g. 24.000MHz - Overall Freq. Stability Blank: ±15ppm Y: ±10ppm R7*: ±7ppm R5*: ±5ppm Packaging Blank: Bulk T: Tape & Reel *Contact Abracon for availability 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 12.09.14 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale TIGHT STABILITY INDUSTRIAL GRADE CRYSTAL OSCILLATOR ASET SERIES Pb RoHS/RoHS II compliant 3.2 x 2.5 x 1.2mm OUTLINE DRAWING: Pin 1 2 3 4 5 6 Function OE NC GND Output NC Vdd Note: Recommend using an approximately 0.01uF bypass capacitor between PIN 3 and 6. Dimensions: Inches (mm) TAPE & REEL: T= tape and reel (1,000 pcs/reel) REFLOW PROFILE Dimensions: mm Need a test socket for the ASET Series? To view compatible PRECISION TEST & BURN-IN SOCKETS for these parts, click here. P/N: AXS-3225-04-05 ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 12.09.14 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale