4.7 x 4.1mm BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-MTD Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) FEATURES: RoHS Compliant AWSCR-MTD AWSCR-MTD 4.7 x 4.1mm | | | | | | | | | | | | | | | APPLICATIONS: • Low resonant impedance • Built-in load capacitors • IR reflow capable • Consumer electronics STANDARD SPECIFICATIONS: Item Frequency Range Resonant Impedance Frequency Tolerance Frequency Stability max. (-25ºC to +85ºC) Withstanding Voltage (V) Rating Voltage (1) D.C.Voltage (2) A.C. Voltage Requirement t 6.00MHz to 50.00MHz See Table 2.1 ± 0.5% ±0.4% (6.00 MHz~13.00 MHz) * ±0.3% (13.01 MHz~50.00 MHz) 50 (DC , 1 min) Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) 100MΩ min. (10V, 1min) -25ºC to +85ºC* o o -55 C to +85 C ±0.3% max. (10 years) Built-in Capacitance Frequency Range (MHz) 6.00 MHz - 13.00 MHz 13.01 MHz - 16.00 MHz 16.01 MHz - 25.99 MHz 26.00 MHz - 50.00 MHz Table 2.1 Resonant Impedance (Ro)((Ω) 30 40 40 40 Standard Built-in Capacitance C1=C2 (pF) 22pF ±20% 22pF ±20% 10pF ±20% 5pF ±20% * Please contact ABRACON for tighter stability and/or wider temperature range 6 V.D.C. max 15 Vp-p. max See Table 2.1 TEST CIRCUIT: Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure X: Ceramic Resonator 1.Input 2.Ground 3.Output OPTIONS AND PART IDENTIFICATION: AWSCR - XX.XXMTD - C Frequency Frequency in MHz ABRACON IS ISO9001:2008 CERTIFIED - Load Capacitance Contact ABRACON for Load Capacitance options Packaging T for Tape and Reel (1,000pcs/reel) Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.12.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 4.7 x 4.1mm BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-MTD Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) AWSCR-MTD AWSCR-MTD RoHS 4.7 x 4.1mm Compliant | | | | | | | | | | | | | | | OUTLINE DRAWING: RECOMMENDED LAND PATTERN Dimension : mm TAPE & REEL: (1,000pcs/reel) Blank Pocket 10 Pitches Loaded Pocket Top Tape Blank Pocket 10 Pitches Leader 200mm Max -70g rength 20 Peeling St 10 max φA φB W T 180±3 60min 12.4min 19.4max Pieces per reel Carrier tape size 1000typ. 12 Carrier Tape Dimension : mm ABRACON IS ISO9001:2008 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.12.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 4.7 x 4.1mm BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-MTD Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) RoHS Compliant AWSCR-MTD AWSCR-MTD 4.7 x 4.1mm | | | | | | | | | | | | | | | REFLOW PROFILE: Peak:260℃max 10s max 250℃ 230℃ 150℃ Pre-heating 100℃ 30s min within 80-120s. within 20-40s CAUTION • Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. • This component is not hermetically sealed. Do not clean or wash the component. • Reflow soldering: Do not use strong acidity flux,such as flux with chlorine content of greater than 0.2wt% during reflow Soldering. • Do not expose the component to open flame. • This specification applies to the functionality of the component as a single unit. Customers are advised to insure that the component is thoroughly evaluated in the particular application. • Shelf life: The warranted shelf life of this product is six months after the delivery date under the conditions of sealed, unopened, original packaging. • Storage conditions: If the product is to be stored for a period greater than six months after the delivery date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. • This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-reliability, life-dependant application. Contact Abracon Corporation prior to using this product when in doubt. ABRACON IS CERTIFIED ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.12.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com