2.5X2.0mm INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-CW RoHS/RoHS II compliant Pb in ceramic, exemption (7c-I) 2.5 x 2.0 x 1.2mm Moisture Sensitivity Level (MSL) – This product is not Moisture Sensitive - MSL = 1 FEATURES: APPLICATIONS: • Remote controls, Microprocessor clocks, Mobile phones, DVD & CD-Roms, Electric appliances • Consumer electronics • Low resonant impedance • Built-in load capacitors • IR reflow capable STANDARD SPECIFICATIONS: Parameters Frequency Range Minimum 20.00 Typical Resonant Impedance (Ro) Built-in Load Capacitance (C1=C2) Frequency Tolerance @25 ºC Frequency Stability @ -25ºC to +85ºC 10 – 20% 5 – 20% 5 – 20% -0.5 -0.2 Withstanding Voltage (1) D.C.Voltage Rating Voltage (2) A.C. Voltage Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) (10 years) 100 -25 -55 -0.2 10 5 5 50 Maximum 60.00 60 50 50 10 + 20% 5 + 20% 5 + 20% Units MHz 0.5 0.2 % % V 6 15 V Vp-p. 85 85 0.2 Ω pF Notes 20.00 MHz – 25.99 MHz 26.00 MHz – 35.00 MHz 35.01 MHz – 60.00 MHz 20.00 MHz – 25.99 MHz 26.00 MHz – 35.00 MHz 35.01 MHz – 60.00 MHz MΩ ºC ºC % DC , 1 min 10V, 1min From Initial Value OPTIONS AND PART IDENTIFICATION: Frequency Frequency in MHz ABRACON IS ISO9001:2008 CE RTIFIED Load Capacitance Contact ABRACON for Built-in Capacitance options Packaging T: 3000pcs/Reel Revised: 08.08.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 2.5X2.0mm INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-CW RoHS/RoHS II compliant Pb in ceramic, exemption (7c-I) 2.5 x 2.0 x 1.2mm TEST CIRCUIT: Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure X: Ceramic Resonator C1=C2: 10pF ±20% ( 20.00MHz~25.99MHz) 5pF ±20% (26.00MHz~35.00MHz) 5pF ±20% (35.01MHz~60.00MHz) OUTLINE DIMENSION: Recommended Land Pattern 1.2 max ：Land Pattern Dimension: mm ABRACON IS ISO9001:2008 CE RTIFIED Revised: 08.08.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 2.5X2.0mm INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-CW RoHS/RoHS II compliant Pb in ceramic, exemption (7c-I) 2.5 x 2.0 x 1.2mm SUGGESTED REFLOW PROFILE TAPE & REEL: T: tape and reel (3,000pcs/reel) ФA 180±3 ФB 60 min. W 8.4 min T 12.4 max Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. Carrier tape size 8 Dimension: mm CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than Six Months after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other highreliability, life dependant applications. Contact Abracon Corporation prior to using this product when in doubt. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 08.08.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com