HC/49US (AT49) MICROPROCESSOR CRYSTAL ABL3 Series Pb RoHS Compliant FEATURES: • Reduced height at 2.0mm • High reliability & Low Cost • Tight stability & extended temperature • Proven resistance welded metal package 11.5 x 5.0 x 2.0 mm | | | | | | | | | | | | | | | APPLICATIONS: • Home electronics • Computers, modems, and communications • High-precision TCXO and clock applications • Microprocessors STANDARD SPECIFICATIONS: PARAMETERS ABRACON P/N Frequency Operation Mode Operating Temperature Storage Temperature Frequency Tolerance at +25°C Frequency Stability over the Operating Temp. (Ref to +25°C) Equivalent Series Resistance Shunt Capacitance C0 Load Capacitance CL Drive Level Aging at 25°C ± 3°C Per Year Insulation Resistance Drive level dependency (DLD), minimum 7 points tested TABLE 1: ESR FREQUENCY (MHz) 3.579 - 4.999 (Fund.) 5.000 - 5.999 (Fund.) 6.000 - 7.999 (Fund.) 8.000 - 8.999 (Fund.) 9.000 - 9.999 (Fund.) 10.000 - 15.999 (Fund.) 16.000 - 50.000 (Fund.) 24.01 - 31.999 (3rd O/T) 32.000 - 70.00 (3rd O/T) ABRACON IS ISO 9001 / QS 9000 CERTIFIED ABL3 Series 3.579545 MHz to 70 MHz AT cut (Fundamental or 3rd OT) or BT cut (See options) 3.579545MHz - 24.0MHz (Fundamental) (Standard) 24.01 - 70.00MHz (3rd- Overtone) (Standard) 24.01MHz - 50.00MHz (Fund. AT or BT) (See options) 0°C to + 70°C (see options) - 55°C to + 125°C ± 50 ppm max. (see options) ± 50 ppm max. (see options) See Table 1 7pF max. 18pF (see options) 1 mW max., 100µW typical ± 5ppm max. 500 MΩ min at 100Vdc ± 15V 1µW to 500µW Change in frequency (Maximum - Minimum) over DLD range < ±10ppm Change in ESR (Maximum - Minimum) over DLD range < 25% of Max ESR value Maximum ESR over DLD range < Max ESR value ESR ( ) 180 120 100 80 60 50 40 100 80 Visit www.abracon.com for Terms & Conditions of Sale Revised: 09 .01 .10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com HC/49US (AT49) MICROPROCESSOR CRYSTAL ABL3 Series Pb RoHS Compliant 11.5 x 5.0 x 2.0 mm | | | | | | | | | | | | | | | OPTIONS AND PART IDENTIFICATION: (Left blank if standard) ABL3- Frequency - Frequency XX.XXXX MHz Load Capacitance Please specify CL in pF or S for Series (minimun 10pF) ESR RXXX (Value in Ω) -R - - - Operating Temp. A -10°C to +60°C B -20°C to +70°C C -30°C to +70°C N -30°C to +85°C D -40°C to +85°C J* -40°C to+ 105°C K* -40°C to +125°C L* -55°C to +125°C Freq. Tolerance - - - T Packaging Tape & Reel P Foam TRAY Tray Value Added I Insulator Tab Middle 3rd lead Trimmed leads for 0.15" length 2 3 4 ± 20 ppm ± 25 ppm ± 30 ppm F FB * Frequency stability ±50ppm, ±100ppm, ±150ppm only. Contact ABRACON for tighter frequency stability ** -10 to +60C only Freq. Stability U** ± 10 ppm G ± 15 ppm X ± 20 ppm W ± 25 ppm Y ± 30 ppm H ± 35 ppm Q ± 100 ppm R ± 150 ppm Mode Fund. AT>24MHz Fund BT>24MHz NOTE: Fundamental BT frequency stability ± 100ppm max.at -10° C to +60° C only OUTLINE DRAWING: Dimensions: inch (mm) ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com HC/49US (AT49) MICROPROCESSOR CRYSTAL ABL3 Series Pb RoHS Compliant 11.5 x 5.0 x 2.0 mm | | | | | | | | | | | | | | | TAPE & REEL: T = Tape and reel 1,000pcs/reel 12.7±1.0 12.7±1.0 18.0 + 0.1 -0.5 12.7 ± 1.0 9.0 ± 0.5 18.5 ± 0.5 22.5max With 0.3mm insulating pad 4.0±0.2 Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com