SMD VC/TCXO ASTX-11, ASVTX-11 Pb ESD Sensitive RoHS/RoHS II compliant 3 .2 X 2 .5 X 0 .9m m Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: • 3.2 x 2.5 x 0.9mm miniature package • Low current consumption 1.5mA for 19.68MHz • Vc function corresponds to PLL circuits • Suitable for RoHS reflow profile APPLICATIONS: • Cellular and cordless phones • Standard OSC for exact equipment • Mobile com munication equipment • Porta ble radio equipment and music player. • PLL STANDARD SPECIFICATIONS: Parameters Frequency Range Minimum Typical Maximum Operating Temperature: Storage Temperature: 10 40 10, 13, 14.4, 16.3676, 19.2, 19.8, 20, 24.5535, 26, 33.6, 38.4, 39, 40 -30 +75 -40 +85 Frequency Stability ∆f/f0 vs Tolerance (@+25°C) at shipping: Tolerance (@+25°C) after reflow: Temperature (ref. to +25°C): Supply Voltage Change (Vdd±5%): -0.5 -1.5 -2.5 -0.2 +0.5 +1.5 +2.5 +0.2 -0.2 +3.135 -1.0 +0.2 +3.465 +1.0 1.5 2.0 2.5 Standard Frequencies: Load Change (ZL±10%): Supply Voltage (Vdd): Aging (first year @+25°C): +3.3 Supply Current (Icc): Voltage Control Function (for ASVTX-11) Control Voltage (Vcc): Frequency Tuning Range: Frequency Tuning Transition: Input Impedance: +0.5 ±8 Positive 500 Output Voltage: Load: Waveform: Phase Noise: ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED 0.8 +1.5 +2.5 Units Notes MHz MHz °C °C ppm ppm V ppm mA mA mA See option (Tabel 1) See option ~19.68MHz ~32.00MHz ~40.00MHz Vdc ppm kΩ 650 (Left blank if standard) 10kΩ//10pF Clipped Sine Wave -135 Vp-p dBc @1kHz Revised: 08.12.14-M Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD VC/TCXO ASTX-11, ASVTX-11 ESD Sensitive Pb RoHS/RoHS II compliant 3 .2 X 2 .5 X 0 .9m m OPTIONS & PART IDENTIFICATION: ASVTX-11 or ASTX-11 Vdd (V) Blank: 3.3V±5% A: 3.0V±5% B: 2.8V±5% C: 2.5V±5% - MHz - Packaging Blank: Bulk T: 1000pcs/reel T3: 3000pcs/reel Frequency in MHz Please specify the frequency in MHz. e.g. 19.200MHz Table 1: Frequency Stability vs Operating Temperature ±1.5ppm ±2ppm ±2.5ppm 0°C ~ +50°C D15 D20 D25 -10°C ~ +60°C E15 E20 E25 -20°C ~ +70°C F15 F20 F25 -30°C ~ +70°C G15 G20 G25 -30°C ~ +75°C H15 H20 Std.(Blank) -40°C ~ +85°C I15 I20 I25 ±3ppm D30 E30 F30 G30 H30 I30 ±4ppm D40 E40 F40 G40 H40 I40 ±5ppm D50 E50 F50 G50 H50 I50 OUTLINE DRAWING: 6-pad package (Date Code prior to March 2014): Note 1: It is not recommended that paths go underneath the oscillator. If needed, please use multi-layer PCB board or resist coating. Note 2: Recommend using an approximately 0.01µF bypass capacitor between Pin 3 and 6. Pin Dimensions: Inches (mm) ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED 1 2 3 4 5 6 Function ASVTX-11 ASTX-11 Vc GND N.C. GND Output N.C. Vdd Revised: 08.12.14-M Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD VC/TCXO ASTX-11, ASVTX-11 ESD Sensitive Pb RoHS/RoHS II compliant 3 .2 X 2 .5 X 0 .9m m OUTLINE DRAWING: 4-pad package (Date Code March 2014 and later): Due to material availability, 1 or 2 side pads may appear on the side of the package The variation in no way affects the electrical performance of the product. Pin 1 2 3 4 Function ASVTX-11 ASTX-11 Vc GND GND Output Vdd Recommended Land Pattern 1 Note 1: It is not recommended that paths go underneath the oscillator. If needed, please use multi-layer PCB board or resist coating. Note 2: Recommend using an approximately 0.01µF bypass capacitor between Pin 2 and 4. Dimensions: mm ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Revised: 08.12.14-M Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD VC/TCXO ASTX-11, ASVTX-11 ESD Sensitive Pb RoHS/RoHS II compliant 3 .2 X 2 .5 X 0 .9m m REFLOW PROFILE: TAPE & REEL: T: 1000pcs/reel T3: 3000pcs/reel Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Revised: 08.12.14-M Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com