HIGH CURRENT SHIELDED POWER INDUCTOR ASPI-7318 MSL Level:1 FEATURES: • 100%lead (Pb) free. • Lowest DCR/uH, in this package size. • Frequency range up to 5.0MHz • Handles high transient current spikes without saturation • Ultra low buzz noise, due to composite construction. Pb RoHS Compliant 7.3 x 6.8 x 3.0 mm APPLICATIONS: • Notebook/Desktop/Server applications. • Low profile, high current power supplies. • Battery powered devices. • DC/DC converter for Field Programmable • Gate Array(FPGA) ELECTRICAL SPECIFICATIONS: ASPI-7318-xxx -55ºC to +125ºC Less than +25˚C, Humidity<75% RH. Abracon P/N: Operating Temperature : Storage Temperature Part Number ASPI-7318Inductance Code ASPI-7318-R10 ASPI-7318-R15 ASPI-7318-R20 ASPI-7318-R22 ASPI-7318-R33 ASPI-7318-R47 ASPI-7318-R56 ASPI-7318-R68 ASPI-7318-R82 ASPI-7318-1R0 ASPI-7318-1R5 ASPI-7318-2R2 ASPI-7318-2R5 ASPI-7318-3R3 ASPI-7318-4R7 ASPI-7318-5R6 ASPI-7318-6R8 ASPI-7318-8R2 ASPI-7318-100 ASPI-7318-220 L Tolerance RDC Max Isat Typ Irms Typ (µH) 0.10 0.15 0.20 0.22 0.33 0.47 0.56 0.68 0.82 1.0 1.5 2.2 2.5 3.3 4.7 5.6 6.8 8.2 10.0 22.0 (M, N) N N N N M M M M M M M M M M M M M M M M mΩ 1.7 2.5 3.0 3.1 3.9 4.2 5.3 5.5 8.0 10.0 15 20 22 30 40 54 60 68 105 230 (A) 50 45 41 34 28 24 23 22 19 17 15 12 11 10 8 7.5 7 6 5.5 3 (A) 30 26 24 22 20 17.5 15.5 15.5 13 11 9 8 8 6 5 5 4.5 4 3 2 Test Conditions 1. Inductance tested at 200kHz, 0.25V, 0A; Tolerance M=±20%; N=±30% 2. All test data is in reference to 25°C ambient. 3. Isat will cause the inductance value to drop approximately 20% 4. Irms will cause an approximate ΔT of 40°C 5. The part temperature (ambient + temp. rise) should not exceed 125°C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 6. Please contact Abracon for the availability of other inductance values. ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.12 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com HIGH CURRENT SHIELDED POWER INDUCTOR ASPI-7318 Pb RoHS Compliant 7.3 x 6.8 x 3.0 mm OPTIONS AND PART IDENTIFICATION ASPI-7318Inductance Code Please refer to the Electrical Spec Table Tolerance M: ±20% * N: ±30% * Packaging T: Tape and Reel (1,000pcs / reel) *N for L = 0.1 ~ 0.22µH *M for L = 0.33 ~ 22µH INDUCTANCE AND TEMPERATURE CURVE OUTLINE DRAWING: Recommended Land Pattern Dimension: mm ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.12 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com HIGH CURRENT SHIELDED POWER INDUCTOR ASPI-7318 Pb RoHS 7.3 x 6.8 x 3.0 mm Compliant REFLOW PROFILE: Item Temperature Scope Time spec. Ramp-up R.T ~ 150oC - Pre-heating 150oC ~ 200oC 60 ~ 180 sec Reflow 217oC 60 ~ 150 sec Peak Temp 260±5oC 20 ~ 40 sec Cooling Peak Temperature ~ 150oC - TAPE & REEL: T= tape and reel (1,000pcs/reel) A0 6.9 ref. B0 7.6 ref. K0 3.4 ref. D 1.5 ref. E 1.75 ref. A 330 W 16 ref. P 12 ref. B 100 ref. P0 4 ref. C 13 ref. P2 2 ref. D 16 ref. Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.12 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com