LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0425 Pb RoHS Compliant 4.0 x 4.0 x 2.5mm FEATURES: APPLICATIONS: • • • • • • Mobile phones • MP3 & 4 and other portable communication equipment • Digital cameras. Small size and low profile: 2.5mm Small DCR and high rated current High reliability to mechanical strength Magnetically shielded by magnetic powder molding Suitable for RoHS reflow profile ELECTRICAL SPECIFICATIONS: Abracon P/N: ASPI-0425 Operating Temperature & Humidity Storage Temperature & Humidity: Part Number Inductance Units Symbol ASPI-0425-1R0 ASPI-0425-1R2 ASPI-0425-2R2 ASPI-0425-3R3 ASPI-0425-4R7 ASPI-0425-6R8 ASPI-0425-100 ASPI-0425-150 ASPI-0425-220 ASPI-0425-330 ASPI-0425-470 ASPI-0425-680 ASPI-0425-101 ASPI-0425-151 ASPI-0425-221 μH L 1.0 1.2 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 : -25˚C to +120˚C (Including self generated heat) -10˚C to + 40˚C, 30% to 70% RH Inductance Tolerance % M, N N N N M M M M M M M M M M M M DCR Tolerance % DCR mΩ DCR 12 18 22 30 40 70 85 120 195 305 495 710 1000 1600 2300 ±30% ±20% Saturation Current A Isat* 3.00 2.75 2.10 1.60 1.40 1.20 0.97 0.77 0.67 0.50 0.40 0.35 0.30 0.22 0.20 Temperature Rise Current A Irms* 3.00 2.75 2.10 1.60 1.40 1.20 0.97 0.77 0.67 0.50 0.40 0.35 0.30 0.22 0.20 Test Conditions 1. Inductance is measured in HP-4285A Precision LCR Meter. 2. RDC is measured in DU-5011 milli ohm meter.(or equivalent). 3. Isat : Based on inductance change (△L/Lo : ≤ -30%) 4. Irms : Based on temperature rise (△T : 40oC TYP. ) 5. Test Freq: 100KHz, 1Vrms OPTIONS AND PART IDENTIFICATION ASPI-0425Inductance Code Please refer to the Electrical Spec Table Tolerance N: ±30%* M: ±20%* Packaging T3: Tape and Reel (3kpcs / reel) *N for L = 1.0 ~ 2.2µH *M for L = 3.3 ~ 220µH ABRACON IS ISO9001:2008 CE RTIFIED Revised: 12.20.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0425 Pb RoHS 4.0 x 4.0 x 2.5mm Compliant OUTLINE DRAWING: Circuit Schematic A B C Max. 4.0±0.2 4.0±0.2 2.5 Recommended Land Pattern No Polarity Dimension: mm ABRACON IS ISO9001:2008 CE RTIFIED 、 Revised: 12.20.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR ASPI-0425 Pb RoHS 4.0 x 4.0 x 1.8mm Compliant TAPE & REEL: T3: 3,000pcs / reel Ao 4.20 Bo 4.20 Ko 2.75 W 12 P 8 T 0.3 A 330 B 21.0±0.8 C 13.5±0.5 G 12.6 N 99.5 T 17.2 Dimension: mm REFLOW PROFILE: ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED 、 Revised: 12.20.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com