APAE1590R2540AKDB1-T 1575.42MHZ/1592~1608MHz

1575.42MHZ/1592~1608MHz; 25 x 25 x 4mm
GPS+GLONASS Patch Antenna
RoHS/RoHS II compliant
APAE1590R2540AKDB1-T
25.0 x 25.0 x 4.0mm
MSL level: Not Applicable
| | | | | | | | | | | | | | |
FEATURES:
• High Gain
• Compact Size and Low Profile
• Pin type
• RoHS Compliance
TYPICAL APPLICATIONS:
Automotive navigation, Marine buoys, Surveying equipment, Healthcare and medical monitoring devices, Cell
phone, Laptop, PND, PDA
STANDARD SPECIFICATIONS:
Parameters
Nominal frequency
Min.
1598
Center Frequency
1608
1597.5±3.0
Units
Note
MHz
GPS
MHz
GLONASS
MHz
-7
-7
Polarization Model
Impedance
Permittivity
Frequency Temperature Coefficient
(*)
Max.
1575
(*)
Return Loss
Typ.
dB
dB
RHCP
50
21
(without tape on 27×27mm
ground plane)
@ 1585 MHz
---Ω
20
@ 1610 MHz
(Right Hand Circular
Polarization)
ppm/°C
Application environment, including size of ground plane will affect stated performance. Fine tuning might be required when installed on customer’s PCB.
TEST CONDITIONS & TEST SETUP:
RADIATION PATTERN
Parts shall be measured under a condition (Temp.:
20±15°C, Humidity: 65±20% R.H.)
Ground plane
SMA
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Measured at 1597MHz
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.20.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
1575.42MHZ/1592~1608MHz; 25 x 25 x 4mm
GPS+GLONASS Patch Antenna
RoHS/RoHS II compliant
APAE1590R2540AKDB1-T
25.0 x 25.0 x 4.0mm
| | | | | | | | | | | | | | |
IMPEDANCE CHARACTERISTICS
OUTLINE DRAWING:
adhesive tape
0.8
2.5±0.1
25.0±0.3
4-R4.0
0.6max
4.0 ± 0.1
3.3±0.3
25.0±0.3
Dimension: mm
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.20.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
1575.42MHZ/1592~1608MHz; 25 x 25 x 4mm
GPS+GLONASS Patch Antenna
RoHS/RoHS II compliant
APAE1590R2540AKDB1-T
25.0 x 25.0 x 4.0mm
| | | | | | | | | | | | | | |
PACKAGING:
“T” is for a vacuum sealed tray containing 50 units.
1000 pieces is the suggested quantity containing 20-trays with 50-pcs per Tray.
NOTE: This product is vacuum packaged to reduce the possibility of oxidation and/or contamination
during storage.
8
3,6
5
1
7
4
2
序号
名
称
1
内 盒(七)
2
外箱十二
3
垫片(二)
4
合格证
5
标 签
6
7
8胶 带
数量
包装座(二)
真空袋(一)
4
1
20
Inner
Box dimensions (unit: mm)
NO.
1
Name
Inner Box
2
3
4
Package
Vacuum Bag
Certificate of approval
5
6
Label
Cushion
7
8
Tray
Adhesive tape
1
5
24
4
3.5
CAUTION:
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
(2) Do not expose the component to open flame.
(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application
circuit.
NOTE:
1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information.
2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement.
3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification.
4) When changing your production process, please notify ABRACON immediately.
5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated,
Automotive Applications. ABRACON’s products are not
specifically designed for Military, Aviation, Aerospace, Life-dependant Medical
applications or any application requiring high reliability where component failure could result in loss of life and/or property.
For applications
requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is
required. Please contact ABRACON Corporation for more information.
6) All specifications and Marking will be subject to change without notice.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
LLC
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.20.15
Ph. 949.546.8000 | Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale