GPS / WLAN Patch Antenna APAEA1575R0940K14-T RoHS/RoHS II compliant MSL level: Not Applicable FEATURES: • Compact Size and Low Profile • Pin type • Customization Available • RoHS Compliance 9.0 x 9.0 x 4.0mm TYPICAL APPLICATIONS: Automotive navigation, Marine buoys, Surveying equipment, Cell phone, Laptop, Healthcare and medical monitoring devices, PND, PDA STANDARD SPECIFICATIONS: Parameters Min. Typ. Receiving Frequency Range Center Frequency (*) Max. 1575 1606 5 Bandwidth Gain Axial Ratio VSWR @ Center Frequency -1.0 Polarization Model Impedance Frequency Temperature Coefficient RHCP 50 5 Units Note MHz MHz MHz (with JL03V2.0 GND Plane) dBic (Peak gain on standardized Ground Plane facing Zenith.) dB (Return loss ≤-10dB) 1.5 -10 10 (Right Hand Circular Polarization) Ω ppm/°C (*) Application environment, including size of the ground plane, proximity to adjacent components, etc., will affect stated performance. Fine tuning might be required when installed on end-customer’s PCB. Abracon offers Antenna Optimization Service, please contact Abracon. TEST CONDITIONS & TEST SETUP: Patch Antenna SMA Adapter Ground Plane Calibration Point Network Analyzer S11 Characteristics : Log Map : Smith Chart STRUCTURE AND MATERIAL Description Antenna Substrate Pin Electrode Ground Plane Adhesive Type ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Material Dielectric Ceramics Copper and tinplated Ag Plated Ag Plated NITTO 5000NS Visit www.abracon.com forTerms & Conditions of Sale Revised 11.14.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS / WLAN Patch Antenna APAEA1575R0940K14-T SMITH CHART RoHS/RoHS II compliant 9.0 x 9.0 x 4.0mm RADIATION PATTERN OUTLINE DIMENSION: Other Tolerance: ±0.2mm Unit: mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised 11.14.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS / WLAN Patch Antenna APAEA1575R0940K14-T RoHS/RoHS II compliant 9.0 x 9.0 x 4.0mm PACKAGING: Package Type Tray Inner Box Outer Box Quantity 90 pcs/tray 900pcs/box 1800 pcs/box 162.0 328 Inner Box CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised 11.14.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com