SMD ONE PORT SAW RESONATOR ASR418S2 Pb RoHS Compliant FEATURES: • One port SAW • Fundamental • Seam sealed ceramic package assures high reliability • Low insertion loss 1.2dB typical • 50 ohms input/output impedance 5.0 x 3.5 x 1.4mm | | | | | | | | | | | | | | | APPLICATIONS: • Transmitter • Remote controller STANDARD SPECIFICATIONS Key Electrical Specifications Parameters Center Frequency (f0) Insertion Loss Quality Factor Turnover Temperature Turnover Frequency Freq. Temp. Coefficient Frequency Aging DC Insulation Resistance Motional Resistance R1 Motional Inductance L1 Motional Capacitance C1 Shunt Static Capacitance C0 Operation Temperature Range Storage Temperature Range DC Voltage between terminals CW RF Power Dissipation EQUIVALENT LC MODEL IS ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Minimum Typical Maximum Units Notes 417.925 ------------25 ------------1.0 ------------2.05 -40 -45 --------- 418.000 1.2 10,730 1,400 ----F0 0.032 --------15 61.3325 2.3661 2.35 ----------------- 418.075 1.8 --------50 --------≤±10 ----23 --------2.65 +85 +85 ±30 0 MHz dB 418MHz±75kHz Unloaded Q 50Ω loaded Q °C MHz ppm/°C ppm/yr MΩ Ω uH fF pF °C °C Vdc dBm TEST CIRCUIT Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.21.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD ONE PORT SAW RESONATOR ASR418S2 Pb RoHS 5.0 x 3.5 x 1.4mm Compliant | | | | | | | | | | | | | | | TYPICAL FREQUENCY RESPONSE OUTLINE DIMENSIONS Pin Configuration 1 Input / Output 3 Output / Input 2/4 Case Ground Dimension Data (unit: mm) Dimension Data (unit: mm) A 1.2 D 1.4 B 0.8 E 5.0 C 0.5 F 3.5 Dimensions: mm IS ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.21_.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD ONE PORT SAW RESONATOR ASR418S2 Pb RoHS Compliant 5.0 x 3.5 x 1.4mm | | | | | | | | | | | | | | | TAPE & REEL: 1000pcs/reel W F E P0 P1 P2 D0 D1 t1 t2 A B 12.0 ±0.3 5.5 ±0.1 1.75 ±0.1 4.0 ±0.2 8.0 ±0.1 2.0 ±0.2 Φ1.5 ±0.1 Φ1.5 ±0.25 0.31 max. 1.95 max. 3.8 max. 5.3 max. Dimensions: mm REFLOW PROFILE ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. IS ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.21.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com