MINIATURE CERAMIC • HCMOS • SURFACE MOUNT• 5Vdc or 3.3Vdc VOLTAGE-CONTROLLED CRYSTAL OSCILLATORS ASLV and ASV V Series 7.0 x 5.0 x 1.7 mm FEATURES: • Low profile (1.7 mm) ceramic VCXO. • Enable / Disable functions. • 7.0 mm x 5.0 mm seam welded. • 5 Vdc or 3.3 Vdc. • Suitable for reflow methods. • HCMOS/TTL output. APPLICATIONS: • Phase locked loops (PLLs). • Synthesizers. • Clock Recover, Digital transmission device. • Digital set-top box. STANDARD SPECIFICATIONS PARAMETERS ASLV ASV V STAN DARD(FoS IC A-T IOMHz NS (See Note) ) PECI F Frequency Range 1.00 MHz 155.52 0°C to +70°C (See Option) -40°C to +85°C ±50ppm max. (See Options) 5Vdc ±5% 3.3Vdc ±5% Operating Temperature (TOPR) Storage Temperature (TSTO) Frequency Stability (∆F/ Fo) Supply Voltage (Vdd) Input Current (I dd) 10mA max. for F < 20MHz 10mA max. for F < 20MHz 20mA max. for F < 40MHz 15mA max. for F < 40MHz 30mA max. for F < 60MHz 25mA max. for F < 60MHz Duty Cycle or Symmetry 40 / 60% max. (See Options) Rise and Fall Times (TR / TF) 8ns max. Output Load 15pF or 2TT L Output Voltage (VOH) 0.9 *Vdd min. (VOL) 0.1*Vdd max. Transfer Function Positive Voltage Control (Vc) 2.5Vdc ±2.0V 1.65Vdc ±1.5V Frequency Deviation ±100ppm min.(See options) ±80ppm min.(See options) “1” or Open: Oscillation > _ 2.2V Linearity ±10% max. “0”: (Hi Z) < 0.8V Start-up Time (TOSC) 10ms max. Output Disabled in high impedance ‘1’ OR OPEN: OSCILLATION > 2.2V (VIH) Tristate Function (VIL) ‘0’ (HIZ) < 0.8V Period jitter one sigma ±10ps max. Period jitter abslute ORDERING OPTIONS PIN NO. FUNCTION 1 2 3 4 5 6 Voltage Control Vc Tristate E/D GND / Case Output N / C ** Vdd -S for 45 / 55% @ 1/ 2 Vdd L or V N102 for ± 100ppm min. N122 for ± 120ppm min. ABRACON ** pin 5 E/D (ASLV1 or ASVV1) Operating Te mperature Range code 0°C~50°C AS X V- Frequency - Temperature stability - Duty Cycle - Pulling - Packaging 60 Note: Higher frequencies available. Please call. ±100ps max. A bypass capacitor 0.01 µF is required from Vdd to Gnd. Please call us for higher frequencies. Test circuit, waveforms, see appendix B. Environmental and mechanical specifications see appendix C, Group 2. Marking, see appendix G. Tape and Reel, see appendix H.(1,000 pcs.reel). Application notes, see appendix A. Recommended handling, see appendix F. XX.XXXXX MHz Dimensions: Inches (mm) @Vc @Vc -T Tape and Reel = 0V to 3.0Vdc* = 0V to 3.0Vdc* Frequency stability (± ppm) 5ppm 10ppm 15ppm 20ppm 30ppm 50ppm 05 10 15 20 30 50 I 0 0 0 0 0 - 0°C~60°C B 0 0 0 0 0 -10°C~60°C D 0 0 0 0 0 0°C~70°C C 0 0 0 0 -10°C~70°C F 0 0 0 0 -20°C~70°C E 0 0 0 -40°C~85°C L 0 0 0= available ® C O R P O R AT I O N NOTE: Left blank if standard • All specifications and markings subject to change without notice 29 Journey • Aliso Viejo, CA 92656 • USA (949) 448-7070 • F AX : (949) 448-8484 E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com ABRACON IS ISO 9001 / QS 9000 CERTIFIED