5Vdc • HCMOS/ TTL COMPATIBLE FULL-SIZE DIP CRYSTAL CLOCK OSCILLATORS ACO 20.2 x12.6 x 5.08 mm FEATURES: • Wide frequency range. • Tight symmetry option. • Fast rise and fall times. • H C M OS and TTL compatible. • Tristate Enable / Disable options. • Anti-Static packaging tube. APPLICATIONS: • Provide clock signals for microprocessors and digital circuits. • High output drive capability applications. STANDARD SPECIFICATIONS Frequency Range 3.5 MHz - 25 MHz PARAMETERS SPECIFICATIONS Operation Mode Fundamental, AT Frequency Range (Fo) 500Hz - 200MHz ** Operating Temperature -10°C to + 60° C (See Options) Operating Temperature (TOPR) 0°C to +70°C Storage Temperature -55°C to + 125° C Storage Temperature (T ) -55°C +125°C STO Frequency Tolerance @ 25°C ± 50 ppm max. to (See Options) Frequency Stability (DF F ) ±100ppm max. Options) / o Frequency Stability over Temp. ± 50 ppm max. (See(See Options) Supply Voltage (Vdd) 5Vdc ±10% Equivalent Series Resistance 200 W for 3.5 MHz < F < 4.0 MHz 30mA max. forfor F< 4.0 24MHz max. for F< 80MHz (ESR) Maximum 150 W MHz <70mA F < 6.0 MHz Input Current (I dd) _ 80MHz 45mA max. forfor F< 6.0 50MHz max.MHz for F> 100 W MHz <85mA F < 10.0 80 W for 10 MHz < F@<114.0 MHz Duty Cycle 45 / 55% max. for F < 50MHz _ /2Vdd (See Options) 50 W for 14 MHz < F < 1 25 MHz _ 50 MHz @ /2Vdd (See Options) or Symmetry 40 / 60% max. for F > Shunt Capacitance C0 7 pF max. _ 24MHz max. for F < RiseCapacitance and Fall Times Load CL (TR / TF) 16 p F10ns (See Option) 5ns max. for F > 24MHz Drive Level 100 µW max. 10TTL (50pF max.) for Fo < 80MHz @ Load Output Aging 25° C First Year ± 5orpp15pF m max. _ Vdc 5TTL or 15pF forat(F100 80MHz o) > Insulation Resistance 500 M W min. ± 15V Output Voltage 0.9*Vdd min. (VOH) ; 0.4Vdc max. (VOL) Start-up Time (TOSC) 10ms max. Tristate Function (VIH) “1” or Open: Oscillation > _ 2.2V (Option -A Only) (VIL ) “0”:Output disabled in high impedance (Hi Z) < 0.8V Output Disable / Enable Time 100ns max. (for Option “- A” ONLY) Dimensions: Inches (mm) * Pin 1 has internal pull-up resistor which allows Pin 1 to be left floating (enable high) Option A ** Higher Frequencies available. Recommended handling, see appendix F. Test circuit, waveforms, see appendix B. Reflow profile, see appendix E. Environmental and mechanical specifications, see appendix C. Group 1. Marking, see appendix G. Application notes, see appendix A. Value added, see appendix D. PIN NUMBER FUNCTION 1 7 8 14 NC or Tristate E/D GND / Case Output Vdd ORDERING OPTIONS ACO - Frequency - Temperature - Overall Frequency Stability - Duty Cycle - Tristate XX.XXXX MHz or kHz -D for -10°C to + 60°C -E for -20°C to + 70°C -F for -30°C to + 70°C -N for -30°C to + 85°C -L for -40°C to + 85°C ABRACON IS ISO 9001 / QS 9000 CERTIFIED -Y -J -R -K -H -C - 50 - Value Added - Packaging @ 1/ 2Vdd @ 1/ 2Vdd -S for 45 / 55% 50 pF load for ± 10ppm max** -TY for Tray packing output drive -T for 47.5 / 52.5% for ± 20ppm max -S1 for 45 / 55% @ 1.4Vdc for ± 25ppm max -G Gull Wing -T1 for 47.5 / 52.5% @ 1.4Vdc for ± 30ppm max -GHT Gull Wing Reflow capable for ± 35ppm max A for Tristate E/D -QXX (Trimmed Leads) for ± 50ppm max ** Standard Operating Temperature Only Frequency 50 MHz max NOTE: Left blank if standard • All specifications and markings subject to change without notice ABRACON 29 Journey • Aliso Viejo, CA 92656 • USA (949) 448-7070 • F AX : (949) 448-8484 E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com C O R P O R AT I O N ® 51