1575.42MHZ/1598~1606MHz, 13 x 13 x 4mm GPS+GLONASS Patch Antenna RoHS/RoHS II Compliant APAE1590R1340AKDB2-T MSL level: Not Applicable 13.0 x 13.0 x 4.0mm | | | | | | | | | | | | | | | FEATURES: • High Gain • Compact Size and Low Profile • Pin type • RoHS Compliance TYPICAL APPLICATIONS: Automotive navigation, Marine buoys, Surveying equipment, Healthcare and medical monitoring devices, Cell phone, Laptop, PND, PDA STANDARD SPECIFICATIONS: Parameters GPS Center Frequency(*) GLONASS Min. Typ. 1575 1598~1606 Return Loss at 1582MHz Return Loss at 1618MHz Axial Ratio RHCP Gain at Zenith 1575MHz RHCP Gain at Zenith 1598~1606MHz Units MHz -10 -10 dB dB -2 -2 dBic Note (with adhesive tape on 18x60mm ground plane) 16 Polarization Model Impedance Permittivity Frequency Temperature Coefficient (*) Max. RHCP 50 91 dBic (on 50× 50mm ground plane) (on 50× 50mm ground plane) (Right Hand Circular Polarization) Ω 20 ppm/°C Application environment, including size of ground plane will affect stated performance. Fine tuning might be required when installed on customer’s PCB. TEST CONDITIONS & TEST SETUP: RADIATION PATTERN Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) G r o u n d p la n e PART IDENTIFICATION: SMA ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised : 01.19.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 1575.42MHZ/1598~1606MHz, 13 x 13 x 4mm GPS+GLONASS Patch Antenna RoHS/RoHS II Compliant APAE1590R1340AKDB2-T 13.0 x 13.0 x 4.0mm | | | | | | | | | | | | | | | IMPEDANCE CHARACTERISTICS OUTLINE DRAWING: 0.8 adhesive tape × ° 0.6max 4.0 ± 0.1 3.3±0.3 Dimension: mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised : 01.19.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 1575.42MHZ/1598~1606MHz, 13 x 13 x 4mm GPS+GLONASS Patch Antenna RoHS/RoHS II Compliant APAE1590R1340AKDB2-T 13.0 x 13.0 x 4.0mm | | | | | | | | | | | | | | | PACKAGING: “T” is for a vacuum sealed tray containing 50 units. 2000 pieces is the suggested quantity containing 40-trays with 50-pcs per Tray. NOTE: This product is vacuum packaged to reduce the possibility of oxidation and/or contamination during storage. 8 3,6 5 1 7 4 2 序号 名 称 Inner Box dimensions (unit: mm) 数量 1 内 盒（七） 4 2 外箱十二 1 3 垫片（二） 合格证 1 5 标 签 5 7 8胶 带 包装座（二） 真空袋（一） Name 1 2 3 4 5 Inner Box Package Vacuum Bag Certificate of approval Label 6 7 Cushion Tray 8 Adhesive tape 20 4 6 NO. 24 4 3.5 CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised : 01.19.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com