RFID Reader (Passive) ARRRN5-915.000MHz RoHS/RoHS II Compliant MSL level: Not Applicable FEATURES: • High Gain • Easy to install • RF Cable and Connector • RoHS Compliant 40.0 x 40.0 x 8.0mm TYPICAL APPLICATIONS: RFID systems for Logistic & Inventory Management of Retail, Pharmaceutical, Automotive Industries; Industrial automation, Contactless smart cards. STANDARD SPECIFICATIONS: Parameters Center Frequency V.S.W.R Bandwidth Impendence Gain Polarization Min. Typ. Max. 915±3 4.0 MHz Ω dBi 50 1.5 RHCP ARRRN5-915.000MHz RFID Reader -40 Working Temperature 40.0 x 40.0 x 8.0mm Storage Temperature Abracon Drawing # 453926 -45 Page (3) of (10) SMITH CHART: Smith Chart 6.0 Radiation Pattern Note 1.5 Date of Issue: June 26th, 2014 5.0 Units MHz Revision #: Initial Release +80 +85 V.S.W.R<1.5 Based on 70×70mm ground plane ˚C ˚C RADIATION PATTERN OUTLINE DRAWING: Unit: mm L1 Other Tolerance: ±0.3mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Description Antenna Type PCB RF Cable RF Connector Thickness Material Dielectric 36x36x4mm Ceramics FR4, 40mm RG178, Ø2.7±0.3mm , L1=96 ± 5mm, L=110± 5mm MMCX-JW3 8mm Max Visit www.abracon.com forTerms & Conditions of Sale Revised 11.17.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com RFID Reader (Passive) ARRRN5-915.000MHz RoHS/RoHS II Compliant 40.0 x 40.0 x 8.0mm TAPE & REEL: Each carton contains 100 pcs of antenna and each casing positions 2pcs of antennas. Carton (outer box) size is 635 x 46 5 x 105 mm. Unit: mm CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised 11.17.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com