Multiband Antenna Module APAMSTJ-138 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 126.5 x 22.0 x 6.7mm MSL level: Not Applicable FEATURES: • Passive multiband antenna (380MHz ~ 2400MHz) • Covering TETRA + ISM + Quad Band Cellular + 3G + WiFi • Glass mount design (6.7mm x 126.5mm x 22mm) • FME Female connector • Gain (2.2dBi) Typ • VSWR 2:1 (Cell), 3:1 (TETRA) • 25W Power handling • 10K Ohm Termination resistor for checking connection • Easy to install (adhesive tape base) • RoHS/RoHS II compliant • 2J Technology TYPICAL APPLICATIONS: • TETRA Public Safety • ISM (868MHz) • AMPS • GSM • Vehicle Cellular and 3G / WiFi Routers • WiFi/Bluetooth • Mobile broadband STANDARD SPECIFICATIONS: Parameters Min. 380 824 Typ. Max. 500 894 Operating Temperature Diagnostic Resistor ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Linear 50 2.2 -40 9.5 AMPS MHz MHz MHz GHz 3G/UMTS GHz WIFI/BLUETOOTH +85 10.5 10 LLC GSM DCS PCS @TETRA 3:1 2:1 VSWR Polarization Model Impedance Gain Note TETRA ISM 868 900 1800 1900 2.1 2.4 Receiving Frequency Units MHz MHz @CELL Ω dBi ˚C kΩ 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.09.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Multiband Antenna Module APAMSTJ-138 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 126.5 x 22.0 x 6.7mm ANTENNA MATCHING S11 CHARACTERISTICS Tetra S11(Log Mag) S11 (VSWR) Quad Band + WiFi S11(Log Mag) ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED S11 (VSWR) LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.09.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Multiband Antenna Module APAMSTJ-138 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 126.5 x 22.0 x 6.7mm OUTLINE DRAWING: Parameters RF Connector Weight Cable Type Cable Length Material Color Description FME Female 55 g RG174U 3m ABS Black Unit: mm PACKAGING: Each antenna is packed in an individual poly bag. 200 pieces antenna in 465x310x250mm box is the suggested quantity. CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.09.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale